Struct embedded_time::rate::KilobitsPerSecond

pub struct KilobitsPerSecond<T: TimeInt = u32>(pub T);

Bits/s × 1,000

Implementations

impl<T: TimeInt> KilobitsPerSecond<T>

pub fn new(value: T) -> Self

See Constructing a rate

Trait Implementations

impl<T: TimeInt, Rhs: Rate> Add<Rhs> for KilobitsPerSecond<T> where
    Rhs: FixedPoint,
    Self: TryFrom<Rhs>, 

type Output = Self

The resulting type after applying the + operator.

fn add(self, rhs: Rhs) -> Self::Output

See Add/Sub

impl<T: Clone + TimeInt> Clone for KilobitsPerSecond<T>

fn clone(&self) -> KilobitsPerSecond<T>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T: Copy + TimeInt> Copy for KilobitsPerSecond<T>

impl<T: Debug + TimeInt> Debug for KilobitsPerSecond<T>

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<T: Default + TimeInt> Default for KilobitsPerSecond<T>

fn default() -> KilobitsPerSecond<T>

Returns the "default value" for a type.

impl<T: TimeInt> Display for KilobitsPerSecond<T>

fn fmt(&self, f: &mut Formatter) -> Result

See Formatting

impl<T: TimeInt> Div<T> for KilobitsPerSecond<T>

type Output = Self

The resulting type after applying the / operator.

fn div(self, rhs: T) -> Self::Output

See Mul/Div

impl<T: Eq + TimeInt> Eq for KilobitsPerSecond<T>

impl<T: TimeInt> FixedPoint for KilobitsPerSecond<T>

type T = T

The integer (magnitude) type

const SCALING_FACTOR: Fraction

The fractional scaling factor

fn new(value: Self::T) -> Self

fn integer(&self) -> &Self::T

See Get the integer part

fn checked_mul(&self, rhs: &Self::T) -> Option<Self>

Multiply with overflow checking

fn checked_div(&self, rhs: &Self::T) -> Option<Self>

Multiply with overflow checking

fn min_value() -> Self::T

Returns the minimum integer value

fn max_value() -> Self::T

Returns the maximum integer value

impl<T: TimeInt> From<BitsPerSecond<T>> for KilobitsPerSecond<T>

fn from(small: BitsPerSecond<T>) -> Self

See Converting between Rates

impl From<BitsPerSecond<u32>> for KilobitsPerSecond<u64>

fn from(small: BitsPerSecond<u32>) -> Self

See Converting between Rates

impl<T: TimeInt> From<BytesPerSecond<T>> for KilobitsPerSecond<T>

fn from(small: BytesPerSecond<T>) -> Self

See Converting between Rates

impl From<BytesPerSecond<u32>> for KilobitsPerSecond<u64>

fn from(small: BytesPerSecond<u32>) -> Self

See Converting between Rates

impl<T: TimeInt> From<KilobitsPerSecond<T>> for Generic<T>

fn from(rate: KilobitsPerSecond<T>) -> Self

See Converting to a Generic Rate

impl<T: TimeInt> From<KilobitsPerSecond<T>> for MegabytesPerSecond<T>

fn from(small: KilobitsPerSecond<T>) -> Self

See Converting between Rates

impl<T: TimeInt> From<KilobitsPerSecond<T>> for MegabitsPerSecond<T>

fn from(small: KilobitsPerSecond<T>) -> Self

See Converting between Rates

impl<T: TimeInt> From<KilobitsPerSecond<T>> for KilobytesPerSecond<T>

fn from(small: KilobitsPerSecond<T>) -> Self

See Converting between Rates

impl From<KilobitsPerSecond<u32>> for MegabytesPerSecond<u64>

fn from(small: KilobitsPerSecond<u32>) -> Self

See Converting between Rates

impl From<KilobitsPerSecond<u32>> for MegabitsPerSecond<u64>

fn from(small: KilobitsPerSecond<u32>) -> Self

See Converting between Rates

impl From<KilobitsPerSecond<u32>> for KilobytesPerSecond<u64>

fn from(small: KilobitsPerSecond<u32>) -> Self

See Converting between Rates

impl From<KilobitsPerSecond<u32>> for KilobitsPerSecond<u64>

fn from(source: KilobitsPerSecond<u32>) -> Self

See Converting between Rates

impl From<KilobitsPerSecond<u32>> for BytesPerSecond<u64>

fn from(big: KilobitsPerSecond<u32>) -> Self

See Converting between Rates

impl From<KilobitsPerSecond<u32>> for BitsPerSecond<u64>

fn from(big: KilobitsPerSecond<u32>) -> Self

See Converting between Rates

impl From<KilobytesPerSecond<u32>> for KilobitsPerSecond<u64>

fn from(big: KilobytesPerSecond<u32>) -> Self

See Converting between Rates

impl From<MegabitsPerSecond<u32>> for KilobitsPerSecond<u64>

fn from(big: MegabitsPerSecond<u32>) -> Self

See Converting between Rates

impl From<MegabytesPerSecond<u32>> for KilobitsPerSecond<u64>

fn from(big: MegabytesPerSecond<u32>) -> Self

See Converting between Rates

impl<T: Hash + TimeInt> Hash for KilobitsPerSecond<T>

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given [Hasher].

impl<T: TimeInt> Mul<T> for KilobitsPerSecond<T>

type Output = Self

The resulting type after applying the * operator.

fn mul(self, rhs: T) -> Self::Output

See Mul/Div

impl<T: Ord + TimeInt> Ord for KilobitsPerSecond<T>

fn cmp(&self, other: &KilobitsPerSecond<T>) -> Ordering

This method returns an [Ordering] between self and other.

#[must_use]fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]fn clamp(self, min: Self, max: Self) -> Self

🔬 This is a nightly-only experimental API. (clamp)

Restrict a value to a certain interval.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<BitsPerSecond<RhsInt>> for KilobitsPerSecond<T> where
    BitsPerSecond<RhsInt>: PartialEq<KilobitsPerSecond<T>>, 

fn eq(&self, rhs: &BitsPerSecond<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<BytesPerSecond<RhsInt>> for KilobitsPerSecond<T> where
    BytesPerSecond<RhsInt>: PartialEq<KilobitsPerSecond<T>>, 

fn eq(&self, rhs: &BytesPerSecond<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<KilobitsPerSecond<RhsInt>> for MegabytesPerSecond<T> where
    KilobitsPerSecond<RhsInt>: PartialEq<MegabytesPerSecond<T>>, 

fn eq(&self, rhs: &KilobitsPerSecond<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<KilobitsPerSecond<RhsInt>> for MegabitsPerSecond<T> where
    KilobitsPerSecond<RhsInt>: PartialEq<MegabitsPerSecond<T>>, 

fn eq(&self, rhs: &KilobitsPerSecond<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<KilobitsPerSecond<RhsInt>> for KilobytesPerSecond<T> where
    KilobitsPerSecond<RhsInt>: PartialEq<KilobytesPerSecond<T>>, 

fn eq(&self, rhs: &KilobitsPerSecond<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<KilobitsPerSecond<RhsInt>> for KilobitsPerSecond<T> where
    T: TryFrom<RhsInt>, 

fn eq(&self, rhs: &KilobitsPerSecond<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<KilobitsPerSecond<RhsInt>> for BytesPerSecond<T> where
    Self: TryFrom<KilobitsPerSecond<RhsInt>>, 

fn eq(&self, rhs: &KilobitsPerSecond<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<KilobitsPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<KilobitsPerSecond<RhsInt>>, 

fn eq(&self, rhs: &KilobitsPerSecond<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<KilobytesPerSecond<RhsInt>> for KilobitsPerSecond<T> where
    Self: TryFrom<KilobytesPerSecond<RhsInt>>, 

fn eq(&self, rhs: &KilobytesPerSecond<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<MegabitsPerSecond<RhsInt>> for KilobitsPerSecond<T> where
    Self: TryFrom<MegabitsPerSecond<RhsInt>>, 

fn eq(&self, rhs: &MegabitsPerSecond<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<MegabytesPerSecond<RhsInt>> for KilobitsPerSecond<T> where
    Self: TryFrom<MegabytesPerSecond<RhsInt>>, 

fn eq(&self, rhs: &MegabytesPerSecond<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<BitsPerSecond<RhsInt>> for KilobitsPerSecond<T> where
    BitsPerSecond<RhsInt>: TryFrom<Self> + Ord, 

fn partial_cmp(&self, rhs: &BitsPerSecond<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<BytesPerSecond<RhsInt>> for KilobitsPerSecond<T> where
    BytesPerSecond<RhsInt>: TryFrom<Self> + Ord, 

fn partial_cmp(&self, rhs: &BytesPerSecond<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<KilobitsPerSecond<RhsInt>> for MegabytesPerSecond<T> where
    KilobitsPerSecond<RhsInt>: TryFrom<Self> + Ord, 

fn partial_cmp(&self, rhs: &KilobitsPerSecond<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<KilobitsPerSecond<RhsInt>> for MegabitsPerSecond<T> where
    KilobitsPerSecond<RhsInt>: TryFrom<Self> + Ord, 

fn partial_cmp(&self, rhs: &KilobitsPerSecond<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<KilobitsPerSecond<RhsInt>> for KilobytesPerSecond<T> where
    KilobitsPerSecond<RhsInt>: TryFrom<Self> + Ord, 

fn partial_cmp(&self, rhs: &KilobitsPerSecond<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<KilobitsPerSecond<RhsInt>> for KilobitsPerSecond<T> where
    T: TryFrom<RhsInt>, 

fn partial_cmp(&self, rhs: &KilobitsPerSecond<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<KilobitsPerSecond<RhsInt>> for BytesPerSecond<T> where
    Self: TryFrom<KilobitsPerSecond<RhsInt>>, 

fn partial_cmp(&self, rhs: &KilobitsPerSecond<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<KilobitsPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<KilobitsPerSecond<RhsInt>>, 

fn partial_cmp(&self, rhs: &KilobitsPerSecond<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<KilobytesPerSecond<RhsInt>> for KilobitsPerSecond<T> where
    Self: TryFrom<KilobytesPerSecond<RhsInt>>, 

fn partial_cmp(&self, rhs: &KilobytesPerSecond<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<MegabitsPerSecond<RhsInt>> for KilobitsPerSecond<T> where
    Self: TryFrom<MegabitsPerSecond<RhsInt>>, 

fn partial_cmp(&self, rhs: &MegabitsPerSecond<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<MegabytesPerSecond<RhsInt>> for KilobitsPerSecond<T> where
    Self: TryFrom<MegabytesPerSecond<RhsInt>>, 

fn partial_cmp(&self, rhs: &MegabytesPerSecond<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt> Rate for KilobitsPerSecond<T>

fn to_generic<DestInt: TimeInt>(
    self,
    scaling_factor: Fraction
) -> Result<Generic<DestInt>, ConversionError> where
    Self: FixedPoint,
    DestInt: TryFrom<Self::T>, 

Construct a Generic Rate from a named Rate (eg. Kilohertz)

fn to_duration<Duration: Duration>(&self) -> Result<Duration, ConversionError> where
    Duration: FixedPoint,
    Self: FixedPoint,
    Duration::T: TryFrom<Self::T>, 

Convert to named Duration

impl<T: TimeInt, Rhs: Rate> Rem<Rhs> for KilobitsPerSecond<T> where
    Self: TryFrom<Rhs>,
    Rhs: FixedPoint, 

type Output = Self

The resulting type after applying the % operator.

fn rem(self, rhs: Rhs) -> Self::Output

See Remainder

impl<T: TimeInt> StructuralEq for KilobitsPerSecond<T>

impl<T: TimeInt, Rhs: Rate> Sub<Rhs> for KilobitsPerSecond<T> where
    Self: TryFrom<Rhs>,
    Rhs: FixedPoint, 

type Output = Self

The resulting type after applying the - operator.

fn sub(self, rhs: Rhs) -> Self::Output

See Add/Sub

impl TryFrom<BitsPerSecond<u64>> for KilobitsPerSecond<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: BitsPerSecond<u64>) -> Result<Self, Self::Error>

See Converting between Rates

impl TryFrom<BytesPerSecond<u64>> for KilobitsPerSecond<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: BytesPerSecond<u64>) -> Result<Self, Self::Error>

See Converting between Rates

impl<SourceInt: TimeInt, DestInt: TimeInt> TryFrom<Generic<SourceInt>> for KilobitsPerSecond<DestInt> where
    DestInt: TryFrom<SourceInt>, 

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(generic_rate: Generic<SourceInt>) -> Result<Self, Self::Error>

See Converting from a Generic Rate

impl<T: TimeInt> TryFrom<KilobitsPerSecond<T>> for BytesPerSecond<T>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: KilobitsPerSecond<T>) -> Result<Self, Self::Error>

See Converting between Rates

impl<T: TimeInt> TryFrom<KilobitsPerSecond<T>> for BitsPerSecond<T>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: KilobitsPerSecond<T>) -> Result<Self, Self::Error>

See Converting between Rates

impl TryFrom<KilobitsPerSecond<u64>> for MegabytesPerSecond<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: KilobitsPerSecond<u64>) -> Result<Self, Self::Error>

See Converting between Rates

impl TryFrom<KilobitsPerSecond<u64>> for MegabitsPerSecond<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: KilobitsPerSecond<u64>) -> Result<Self, Self::Error>

See Converting between Rates

impl TryFrom<KilobitsPerSecond<u64>> for KilobytesPerSecond<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: KilobitsPerSecond<u64>) -> Result<Self, Self::Error>

See Converting between Rates

impl TryFrom<KilobitsPerSecond<u64>> for KilobitsPerSecond<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(source: KilobitsPerSecond<u64>) -> Result<Self, Self::Error>

See Converting between Rates

impl TryFrom<KilobitsPerSecond<u64>> for BytesPerSecond<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: KilobitsPerSecond<u64>) -> Result<Self, Self::Error>

See Converting between Rates

impl TryFrom<KilobitsPerSecond<u64>> for BitsPerSecond<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: KilobitsPerSecond<u64>) -> Result<Self, Self::Error>

See Converting between Rates

impl<T: TimeInt> TryFrom<KilobytesPerSecond<T>> for KilobitsPerSecond<T>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: KilobytesPerSecond<T>) -> Result<Self, Self::Error>

See Converting between Rates

impl TryFrom<KilobytesPerSecond<u64>> for KilobitsPerSecond<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: KilobytesPerSecond<u64>) -> Result<Self, Self::Error>

See Converting between Rates

impl<T: TimeInt> TryFrom<MegabitsPerSecond<T>> for KilobitsPerSecond<T>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: MegabitsPerSecond<T>) -> Result<Self, Self::Error>

See Converting between Rates

impl TryFrom<MegabitsPerSecond<u64>> for KilobitsPerSecond<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: MegabitsPerSecond<u64>) -> Result<Self, Self::Error>

See Converting between Rates

impl<T: TimeInt> TryFrom<MegabytesPerSecond<T>> for KilobitsPerSecond<T>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: MegabytesPerSecond<T>) -> Result<Self, Self::Error>

See Converting between Rates

impl TryFrom<MegabytesPerSecond<u64>> for KilobitsPerSecond<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: MegabytesPerSecond<u64>) -> Result<Self, Self::Error>

See Converting between Rates