Struct embedded_time::rate::BitsPerSecond

[+] Show declaration

pub struct BitsPerSecond<T: TimeInt = u32>(pub T);

[−] Expand description

Bits/s

Implementations

impl<T: TimeInt> BitsPerSecond<T>[−]

pub fn new(value: T) -> Self[−]

See Constructing a rate

Trait Implementations

impl<T: TimeInt, Rhs: Rate> Add<Rhs> for BitsPerSecond<T> where
    Rhs: FixedPoint,
    Self: TryFrom<Rhs>, [+]

type Output = Self

The resulting type after applying the + operator.

fn add(self, rhs: Rhs) -> Self::Output[−]

See Add/Sub

impl<T: Clone + TimeInt> Clone for BitsPerSecond<T>[+]

[+] Show hidden undocumented items

fn clone(&self) -> BitsPerSecond<T>[−]

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)[−]

Performs copy-assignment from source.

impl<T: Copy + TimeInt> Copy for BitsPerSecond<T>

impl<T: Debug + TimeInt> Debug for BitsPerSecond<T>[+]

[+] Show hidden undocumented items

fn fmt(&self, f: &mut Formatter) -> Result[−]

Formats the value using the given formatter.

impl<T: Default + TimeInt> Default for BitsPerSecond<T>[+]

[+] Show hidden undocumented items

fn default() -> BitsPerSecond<T>[−]

Returns the "default value" for a type.

impl<T: TimeInt> Display for BitsPerSecond<T>[+]

fn fmt(&self, f: &mut Formatter) -> Result[−]

See Formatting

impl<T: TimeInt> Div<T> for BitsPerSecond<T>[+]

type Output = Self

The resulting type after applying the / operator.

fn div(self, rhs: T) -> Self::Output[−]

See Mul/Div

impl<T: Eq + TimeInt> Eq for BitsPerSecond<T>

impl<T: TimeInt> FixedPoint for BitsPerSecond<T>[+]

[+] Show hidden undocumented items

type T = T

The integer (magnitude) type

const SCALING_FACTOR: Fraction[−][−]

The fractional scaling factor

fn new(value: Self::T) -> Self

fn integer(&self) -> &Self::T[−]

See Get the integer part

fn checked_mul(&self, rhs: &Self::T) -> Option<Self>[−]

Multiply with overflow checking

fn checked_div(&self, rhs: &Self::T) -> Option<Self>[−]

Multiply with overflow checking

fn min_value() -> Self::T[−]

Returns the minimum integer value

fn max_value() -> Self::T[−]

Returns the maximum integer value

impl<T: TimeInt> From<BitsPerSecond<T>> for Generic<T>[+]

fn from(rate: BitsPerSecond<T>) -> Self[−]

See Converting to a Generic Rate

impl<T: TimeInt> From<BitsPerSecond<T>> for MebibytesPerSecond<T>[+]

fn from(small: BitsPerSecond<T>) -> Self[−]

See Converting between Rates

impl<T: TimeInt> From<BitsPerSecond<T>> for MebibitsPerSecond<T>[+]

fn from(small: BitsPerSecond<T>) -> Self[−]

See Converting between Rates

impl<T: TimeInt> From<BitsPerSecond<T>> for KibibytesPerSecond<T>[+]

fn from(small: BitsPerSecond<T>) -> Self[−]

See Converting between Rates

impl<T: TimeInt> From<BitsPerSecond<T>> for KibibitsPerSecond<T>[+]

fn from(small: BitsPerSecond<T>) -> Self[−]

See Converting between Rates

impl<T: TimeInt> From<BitsPerSecond<T>> for MegabytesPerSecond<T>[+]

fn from(small: BitsPerSecond<T>) -> Self[−]

See Converting between Rates

impl<T: TimeInt> From<BitsPerSecond<T>> for MegabitsPerSecond<T>[+]

fn from(small: BitsPerSecond<T>) -> Self[−]

See Converting between Rates

impl<T: TimeInt> From<BitsPerSecond<T>> for KilobytesPerSecond<T>[+]

fn from(small: BitsPerSecond<T>) -> Self[−]

See Converting between Rates

impl<T: TimeInt> From<BitsPerSecond<T>> for KilobitsPerSecond<T>[+]

fn from(small: BitsPerSecond<T>) -> Self[−]

See Converting between Rates

impl<T: TimeInt> From<BitsPerSecond<T>> for BytesPerSecond<T>[+]

fn from(small: BitsPerSecond<T>) -> Self[−]

See Converting between Rates

impl From<BitsPerSecond<u32>> for MebibytesPerSecond<u64>[+]

fn from(small: BitsPerSecond<u32>) -> Self[−]

See Converting between Rates

impl From<BitsPerSecond<u32>> for MebibitsPerSecond<u64>[+]

fn from(small: BitsPerSecond<u32>) -> Self[−]

See Converting between Rates

impl From<BitsPerSecond<u32>> for KibibytesPerSecond<u64>[+]

fn from(small: BitsPerSecond<u32>) -> Self[−]

See Converting between Rates

impl From<BitsPerSecond<u32>> for KibibitsPerSecond<u64>[+]

fn from(small: BitsPerSecond<u32>) -> Self[−]

See Converting between Rates

impl From<BitsPerSecond<u32>> for MegabytesPerSecond<u64>[+]

fn from(small: BitsPerSecond<u32>) -> Self[−]

See Converting between Rates

impl From<BitsPerSecond<u32>> for MegabitsPerSecond<u64>[+]

fn from(small: BitsPerSecond<u32>) -> Self[−]

See Converting between Rates

impl From<BitsPerSecond<u32>> for KilobytesPerSecond<u64>[+]

fn from(small: BitsPerSecond<u32>) -> Self[−]

See Converting between Rates

impl From<BitsPerSecond<u32>> for KilobitsPerSecond<u64>[+]

fn from(small: BitsPerSecond<u32>) -> Self[−]

See Converting between Rates

impl From<BitsPerSecond<u32>> for BytesPerSecond<u64>[+]

fn from(small: BitsPerSecond<u32>) -> Self[−]

See Converting between Rates

impl From<BitsPerSecond<u32>> for BitsPerSecond<u64>[+]

fn from(source: BitsPerSecond<u32>) -> Self[−]

See Converting between Rates

impl From<BytesPerSecond<u32>> for BitsPerSecond<u64>[+]

fn from(big: BytesPerSecond<u32>) -> Self[−]

See Converting between Rates

impl From<KibibitsPerSecond<u32>> for BitsPerSecond<u64>[+]

fn from(big: KibibitsPerSecond<u32>) -> Self[−]

See Converting between Rates

impl From<KibibytesPerSecond<u32>> for BitsPerSecond<u64>[+]

fn from(big: KibibytesPerSecond<u32>) -> Self[−]

See Converting between Rates

impl From<KilobitsPerSecond<u32>> for BitsPerSecond<u64>[+]

fn from(big: KilobitsPerSecond<u32>) -> Self[−]

See Converting between Rates

impl From<KilobytesPerSecond<u32>> for BitsPerSecond<u64>[+]

fn from(big: KilobytesPerSecond<u32>) -> Self[−]

See Converting between Rates

impl From<MebibitsPerSecond<u32>> for BitsPerSecond<u64>[+]

fn from(big: MebibitsPerSecond<u32>) -> Self[−]

See Converting between Rates

impl From<MebibytesPerSecond<u32>> for BitsPerSecond<u64>[+]

fn from(big: MebibytesPerSecond<u32>) -> Self[−]

See Converting between Rates

impl From<MegabitsPerSecond<u32>> for BitsPerSecond<u64>[+]

fn from(big: MegabitsPerSecond<u32>) -> Self[−]

See Converting between Rates

impl From<MegabytesPerSecond<u32>> for BitsPerSecond<u64>[+]

fn from(big: MegabytesPerSecond<u32>) -> Self[−]

See Converting between Rates

impl<T: Hash + TimeInt> Hash for BitsPerSecond<T>[+]

[+] Show hidden undocumented items

fn hash<__H: Hasher>(&self, state: &mut __H)[−]

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, [−]

Feeds a slice of this type into the given [Hasher].

impl<T: TimeInt> Mul<T> for BitsPerSecond<T>[+]

type Output = Self

The resulting type after applying the * operator.

fn mul(self, rhs: T) -> Self::Output[−]

See Mul/Div

impl<T: Ord + TimeInt> Ord for BitsPerSecond<T>[+]

[+] Show hidden undocumented items

fn cmp(&self, other: &BitsPerSecond<T>) -> Ordering[−]

This method returns an [Ordering] between self and other.

[+] Expand attributes

#[must_use]fn max(self, other: Self) -> Self[−]

Compares and returns the maximum of two values.

[+] Expand attributes

#[must_use]fn min(self, other: Self) -> Self[−]

Compares and returns the minimum of two values.

[+] Expand attributes

#[must_use]fn clamp(self, min: Self, max: Self) -> Self[−]

🔬 This is a nightly-only experimental API. (clamp)

Restrict a value to a certain interval.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<BitsPerSecond<RhsInt>> for MebibytesPerSecond<T> where
    BitsPerSecond<RhsInt>: PartialEq<MebibytesPerSecond<T>>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &BitsPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<BitsPerSecond<RhsInt>> for MebibitsPerSecond<T> where
    BitsPerSecond<RhsInt>: PartialEq<MebibitsPerSecond<T>>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &BitsPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<BitsPerSecond<RhsInt>> for KibibytesPerSecond<T> where
    BitsPerSecond<RhsInt>: PartialEq<KibibytesPerSecond<T>>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &BitsPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<BitsPerSecond<RhsInt>> for KibibitsPerSecond<T> where
    BitsPerSecond<RhsInt>: PartialEq<KibibitsPerSecond<T>>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &BitsPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<BitsPerSecond<RhsInt>> for MegabytesPerSecond<T> where
    BitsPerSecond<RhsInt>: PartialEq<MegabytesPerSecond<T>>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &BitsPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<BitsPerSecond<RhsInt>> for MegabitsPerSecond<T> where
    BitsPerSecond<RhsInt>: PartialEq<MegabitsPerSecond<T>>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &BitsPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<BitsPerSecond<RhsInt>> for KilobytesPerSecond<T> where
    BitsPerSecond<RhsInt>: PartialEq<KilobytesPerSecond<T>>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &BitsPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<BitsPerSecond<RhsInt>> for KilobitsPerSecond<T> where
    BitsPerSecond<RhsInt>: PartialEq<KilobitsPerSecond<T>>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &BitsPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<BitsPerSecond<RhsInt>> for BytesPerSecond<T> where
    BitsPerSecond<RhsInt>: PartialEq<BytesPerSecond<T>>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &BitsPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<BitsPerSecond<RhsInt>> for BitsPerSecond<T> where
    T: TryFrom<RhsInt>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &BitsPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<BytesPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<BytesPerSecond<RhsInt>>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &BytesPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<KibibitsPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<KibibitsPerSecond<RhsInt>>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &KibibitsPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<KibibytesPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<KibibytesPerSecond<RhsInt>>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &KibibytesPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<KilobitsPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<KilobitsPerSecond<RhsInt>>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &KilobitsPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<KilobytesPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<KilobytesPerSecond<RhsInt>>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &KilobytesPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<MebibitsPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<MebibitsPerSecond<RhsInt>>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &MebibitsPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<MebibytesPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<MebibytesPerSecond<RhsInt>>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &MebibytesPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<MegabitsPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<MegabitsPerSecond<RhsInt>>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &MegabitsPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<MegabytesPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<MegabytesPerSecond<RhsInt>>, [+]

[+] Show hidden undocumented items

fn eq(&self, rhs: &MegabytesPerSecond<RhsInt>) -> bool[−]

See Comparisons

[+] Expand attributes

#[must_use]fn ne(&self, other: &Rhs) -> bool[−]

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<BitsPerSecond<RhsInt>> for MebibytesPerSecond<T> where
    BitsPerSecond<RhsInt>: TryFrom<Self> + Ord, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &BitsPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<BitsPerSecond<RhsInt>> for MebibitsPerSecond<T> where
    BitsPerSecond<RhsInt>: TryFrom<Self> + Ord, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &BitsPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<BitsPerSecond<RhsInt>> for KibibytesPerSecond<T> where
    BitsPerSecond<RhsInt>: TryFrom<Self> + Ord, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &BitsPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<BitsPerSecond<RhsInt>> for KibibitsPerSecond<T> where
    BitsPerSecond<RhsInt>: TryFrom<Self> + Ord, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &BitsPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<BitsPerSecond<RhsInt>> for MegabytesPerSecond<T> where
    BitsPerSecond<RhsInt>: TryFrom<Self> + Ord, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &BitsPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<BitsPerSecond<RhsInt>> for MegabitsPerSecond<T> where
    BitsPerSecond<RhsInt>: TryFrom<Self> + Ord, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &BitsPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<BitsPerSecond<RhsInt>> for KilobytesPerSecond<T> where
    BitsPerSecond<RhsInt>: TryFrom<Self> + Ord, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &BitsPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<BitsPerSecond<RhsInt>> for KilobitsPerSecond<T> where
    BitsPerSecond<RhsInt>: TryFrom<Self> + Ord, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &BitsPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<BitsPerSecond<RhsInt>> for BytesPerSecond<T> where
    BitsPerSecond<RhsInt>: TryFrom<Self> + Ord, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &BitsPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<BitsPerSecond<RhsInt>> for BitsPerSecond<T> where
    T: TryFrom<RhsInt>, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &BitsPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<BytesPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<BytesPerSecond<RhsInt>>, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &BytesPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<KibibitsPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<KibibitsPerSecond<RhsInt>>, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &KibibitsPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<KibibytesPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<KibibytesPerSecond<RhsInt>>, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &KibibytesPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<KilobitsPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<KilobitsPerSecond<RhsInt>>, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &KilobitsPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<KilobytesPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<KilobytesPerSecond<RhsInt>>, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &KilobytesPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<MebibitsPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<MebibitsPerSecond<RhsInt>>, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &MebibitsPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<MebibytesPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<MebibytesPerSecond<RhsInt>>, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &MebibytesPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<MegabitsPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<MegabitsPerSecond<RhsInt>>, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &MegabitsPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<MegabytesPerSecond<RhsInt>> for BitsPerSecond<T> where
    Self: TryFrom<MegabytesPerSecond<RhsInt>>, [+]

[+] Show hidden undocumented items

fn partial_cmp(&self, rhs: &MegabytesPerSecond<RhsInt>) -> Option<Ordering>[−]

See Comparisons

[+] Expand attributes

#[must_use]fn lt(&self, other: &Rhs) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

[+] Expand attributes

#[must_use]fn le(&self, other: &Rhs) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

[+] Expand attributes

#[must_use]fn gt(&self, other: &Rhs) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

[+] Expand attributes

#[must_use]fn ge(&self, other: &Rhs) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt> Rate for BitsPerSecond<T>[+]

[+] Show hidden undocumented items

fn to_generic<DestInt: TimeInt>(
    self,
    scaling_factor: Fraction
) -> Result<Generic<DestInt>, ConversionError> where
    Self: FixedPoint,
    DestInt: TryFrom<Self::T>, [−]

Construct a Generic Rate from a named Rate (eg. Kilohertz)

fn to_duration<Duration: Duration>(&self) -> Result<Duration, ConversionError> where
    Duration: FixedPoint,
    Self: FixedPoint,
    Duration::T: TryFrom<Self::T>, [−]

Convert to named Duration

impl<T: TimeInt, Rhs: Rate> Rem<Rhs> for BitsPerSecond<T> where
    Self: TryFrom<Rhs>,
    Rhs: FixedPoint, [+]

type Output = Self

The resulting type after applying the % operator.

fn rem(self, rhs: Rhs) -> Self::Output[−]

See Remainder

impl<T: TimeInt> StructuralEq for BitsPerSecond<T>

impl<T: TimeInt, Rhs: Rate> Sub<Rhs> for BitsPerSecond<T> where
    Self: TryFrom<Rhs>,
    Rhs: FixedPoint, [+]

type Output = Self

The resulting type after applying the - operator.

fn sub(self, rhs: Rhs) -> Self::Output[−]

See Add/Sub

impl TryFrom<BitsPerSecond<u64>> for MebibytesPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: BitsPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl TryFrom<BitsPerSecond<u64>> for MebibitsPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: BitsPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl TryFrom<BitsPerSecond<u64>> for KibibytesPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: BitsPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl TryFrom<BitsPerSecond<u64>> for KibibitsPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: BitsPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl TryFrom<BitsPerSecond<u64>> for MegabytesPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: BitsPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl TryFrom<BitsPerSecond<u64>> for MegabitsPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: BitsPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl TryFrom<BitsPerSecond<u64>> for KilobytesPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: BitsPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl TryFrom<BitsPerSecond<u64>> for KilobitsPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: BitsPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl TryFrom<BitsPerSecond<u64>> for BytesPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: BitsPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl TryFrom<BitsPerSecond<u64>> for BitsPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(source: BitsPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl<T: TimeInt> TryFrom<BytesPerSecond<T>> for BitsPerSecond<T>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: BytesPerSecond<T>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl TryFrom<BytesPerSecond<u64>> for BitsPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: BytesPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl<SourceInt: TimeInt, DestInt: TimeInt> TryFrom<Generic<SourceInt>> for BitsPerSecond<DestInt> where
    DestInt: TryFrom<SourceInt>, [+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(generic_rate: Generic<SourceInt>) -> Result<Self, Self::Error>[−]

See Converting from a Generic Rate

impl<T: TimeInt> TryFrom<KibibitsPerSecond<T>> for BitsPerSecond<T>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: KibibitsPerSecond<T>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl TryFrom<KibibitsPerSecond<u64>> for BitsPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: KibibitsPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl<T: TimeInt> TryFrom<KibibytesPerSecond<T>> for BitsPerSecond<T>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: KibibytesPerSecond<T>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl TryFrom<KibibytesPerSecond<u64>> for BitsPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: KibibytesPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl<T: TimeInt> TryFrom<KilobitsPerSecond<T>> for BitsPerSecond<T>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: KilobitsPerSecond<T>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl TryFrom<KilobitsPerSecond<u64>> for BitsPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: KilobitsPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl<T: TimeInt> TryFrom<KilobytesPerSecond<T>> for BitsPerSecond<T>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: KilobytesPerSecond<T>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl TryFrom<KilobytesPerSecond<u64>> for BitsPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: KilobytesPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl<T: TimeInt> TryFrom<MebibitsPerSecond<T>> for BitsPerSecond<T>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: MebibitsPerSecond<T>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl TryFrom<MebibitsPerSecond<u64>> for BitsPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: MebibitsPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl<T: TimeInt> TryFrom<MebibytesPerSecond<T>> for BitsPerSecond<T>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: MebibytesPerSecond<T>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl TryFrom<MebibytesPerSecond<u64>> for BitsPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: MebibytesPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl<T: TimeInt> TryFrom<MegabitsPerSecond<T>> for BitsPerSecond<T>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: MegabitsPerSecond<T>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl TryFrom<MegabitsPerSecond<u64>> for BitsPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: MegabitsPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl<T: TimeInt> TryFrom<MegabytesPerSecond<T>> for BitsPerSecond<T>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: MegabytesPerSecond<T>) -> Result<Self, Self::Error>[−]

See Converting between Rates

impl TryFrom<MegabytesPerSecond<u64>> for BitsPerSecond<u32>[+]

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: MegabytesPerSecond<u64>) -> Result<Self, Self::Error>[−]

See Converting between Rates