Struct embedded_time::duration::Seconds

pub struct Seconds<T: TimeInt = u32>(pub T);

A duration unit type

Implementations

impl<T: TimeInt> Seconds<T>

pub fn new(value: T) -> Self

See Constructing a duration

Trait Implementations

impl<T: TimeInt, Clock: Clock> Add<Instant<Clock>> for Seconds<T> where
    Clock::T: TryFrom<T>, 

type Output = Instant<Clock>

The resulting type after applying the + operator.

fn add(self, rhs: Instant<Clock>) -> Self::Output

Performs the + operation.

impl<T: TimeInt, Rhs: Duration> Add<Rhs> for Seconds<T> where
    Rhs: FixedPoint,
    Self: TryFrom<Rhs>, 

type Output = Self

The resulting type after applying the + operator.

fn add(self, rhs: Rhs) -> Self::Output

See Add/Sub

impl<T: Clone + TimeInt> Clone for Seconds<T>

fn clone(&self) -> Seconds<T>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T: Copy + TimeInt> Copy for Seconds<T>

impl<T: Debug + TimeInt> Debug for Seconds<T>

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<T: Default + TimeInt> Default for Seconds<T>

fn default() -> Seconds<T>

Returns the "default value" for a type.

impl<T: TimeInt> Display for Seconds<T>

fn fmt(&self, f: &mut Formatter) -> Result

See Formatting

impl<T: TimeInt> Div<T> for Seconds<T>

type Output = Self

The resulting type after applying the / operator.

fn div(self, rhs: T) -> Self::Output

See Mul/Div

impl<T: TimeInt> Duration for Seconds<T>

fn to_generic<DestInt: TimeInt>(
    self,
    scaling_factor: Fraction
) -> Result<Generic<DestInt>, ConversionError> where
    Self: FixedPoint,
    DestInt: TryFrom<Self::T>, 

Construct a Generic Duration from a named Duration (eg. Milliseconds)

fn to_rate<Rate: Rate>(&self) -> Result<Rate, ConversionError> where
    Rate: FixedPoint,
    Self: FixedPoint,
    Rate::T: TryFrom<Self::T>, 

Convert to named Rate

impl<T: Eq + TimeInt> Eq for Seconds<T>

impl<T: TimeInt> FixedPoint for Seconds<T>

type T = T

The integer (magnitude) type

const SCALING_FACTOR: Fraction

The fractional scaling factor

fn new(value: Self::T) -> Self

fn integer(&self) -> &Self::T

See Get the integer part

fn checked_mul(&self, rhs: &Self::T) -> Option<Self>

Multiply with overflow checking

fn checked_div(&self, rhs: &Self::T) -> Option<Self>

Multiply with overflow checking

fn min_value() -> Self::T

Returns the minimum integer value

fn max_value() -> Self::T

Returns the maximum integer value

impl From<Duration> for Seconds<u64>

fn from(core_duration: Duration) -> Self

See Converting from core types

impl From<Hours<u32>> for Seconds<u64>

fn from(big: Hours<u32>) -> Self

See Converting between Durations

impl<T: TimeInt> From<Microseconds<T>> for Seconds<T>

fn from(small: Microseconds<T>) -> Self

See Converting between Durations

impl From<Microseconds<u32>> for Seconds<u64>

fn from(small: Microseconds<u32>) -> Self

See Converting between Durations

impl<T: TimeInt> From<Milliseconds<T>> for Seconds<T>

fn from(small: Milliseconds<T>) -> Self

See Converting between Durations

impl From<Milliseconds<u32>> for Seconds<u64>

fn from(small: Milliseconds<u32>) -> Self

See Converting between Durations

impl From<Minutes<u32>> for Seconds<u64>

fn from(big: Minutes<u32>) -> Self

See Converting between Durations

impl<T: TimeInt> From<Nanoseconds<T>> for Seconds<T>

fn from(small: Nanoseconds<T>) -> Self

See Converting between Durations

impl From<Nanoseconds<u32>> for Seconds<u64>

fn from(small: Nanoseconds<u32>) -> Self

See Converting between Durations

impl<T: TimeInt> From<Seconds<T>> for Generic<T>

fn from(duration: Seconds<T>) -> Self

See Converting to a Generic Duration

impl<T: TimeInt> From<Seconds<T>> for Hours<T>

fn from(small: Seconds<T>) -> Self

See Converting between Durations

impl<T: TimeInt> From<Seconds<T>> for Minutes<T>

fn from(small: Seconds<T>) -> Self

See Converting between Durations

impl From<Seconds<u32>> for Seconds<u64>

fn from(source: Seconds<u32>) -> Self

See Converting between Durations

impl From<Seconds<u32>> for Hours<u64>

fn from(small: Seconds<u32>) -> Self

See Converting between Durations

impl From<Seconds<u32>> for Minutes<u64>

fn from(small: Seconds<u32>) -> Self

See Converting between Durations

impl From<Seconds<u32>> for Nanoseconds<u64>

fn from(big: Seconds<u32>) -> Self

See Converting between Durations

impl From<Seconds<u32>> for Microseconds<u64>

fn from(big: Seconds<u32>) -> Self

See Converting between Durations

impl From<Seconds<u32>> for Milliseconds<u64>

fn from(big: Seconds<u32>) -> Self

See Converting between Durations

impl<T: Hash + TimeInt> Hash for Seconds<T>

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given [Hasher].

impl<T: TimeInt> Mul<T> for Seconds<T>

type Output = Self

The resulting type after applying the * operator.

fn mul(self, rhs: T) -> Self::Output

See Mul/Div

impl<T: Ord + TimeInt> Ord for Seconds<T>

fn cmp(&self, other: &Seconds<T>) -> Ordering

This method returns an [Ordering] between self and other.

#[must_use]fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]fn clamp(self, min: Self, max: Self) -> Self

🔬 This is a nightly-only experimental API. (clamp)

Restrict a value to a certain interval.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<Hours<RhsInt>> for Seconds<T> where
    Self: TryFrom<Hours<RhsInt>>, 

fn eq(&self, rhs: &Hours<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<Microseconds<RhsInt>> for Seconds<T> where
    Microseconds<RhsInt>: TryFrom<Self>, 

fn eq(&self, rhs: &Microseconds<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<Milliseconds<RhsInt>> for Seconds<T> where
    Milliseconds<RhsInt>: TryFrom<Self>, 

fn eq(&self, rhs: &Milliseconds<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<Minutes<RhsInt>> for Seconds<T> where
    Self: TryFrom<Minutes<RhsInt>>, 

fn eq(&self, rhs: &Minutes<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<Nanoseconds<RhsInt>> for Seconds<T> where
    Nanoseconds<RhsInt>: TryFrom<Self>, 

fn eq(&self, rhs: &Nanoseconds<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<Seconds<RhsInt>> for Seconds<T> where
    T: TryFrom<RhsInt>, 

fn eq(&self, rhs: &Seconds<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<Seconds<RhsInt>> for Hours<T> where
    Seconds<RhsInt>: TryFrom<Self>, 

fn eq(&self, rhs: &Seconds<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<Seconds<RhsInt>> for Minutes<T> where
    Seconds<RhsInt>: TryFrom<Self>, 

fn eq(&self, rhs: &Seconds<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<Seconds<RhsInt>> for Nanoseconds<T> where
    Self: TryFrom<Seconds<RhsInt>>, 

fn eq(&self, rhs: &Seconds<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<Seconds<RhsInt>> for Microseconds<T> where
    Self: TryFrom<Seconds<RhsInt>>, 

fn eq(&self, rhs: &Seconds<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialEq<Seconds<RhsInt>> for Milliseconds<T> where
    Self: TryFrom<Seconds<RhsInt>>, 

fn eq(&self, rhs: &Seconds<RhsInt>) -> bool

See Comparisons

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<Hours<RhsInt>> for Seconds<T> where
    Self: TryFrom<Hours<RhsInt>>, 

fn partial_cmp(&self, rhs: &Hours<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<Microseconds<RhsInt>> for Seconds<T> where
    Microseconds<RhsInt>: TryFrom<Self>, 

fn partial_cmp(&self, rhs: &Microseconds<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<Milliseconds<RhsInt>> for Seconds<T> where
    Milliseconds<RhsInt>: TryFrom<Self>, 

fn partial_cmp(&self, rhs: &Milliseconds<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<Minutes<RhsInt>> for Seconds<T> where
    Self: TryFrom<Minutes<RhsInt>>, 

fn partial_cmp(&self, rhs: &Minutes<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<Nanoseconds<RhsInt>> for Seconds<T> where
    Nanoseconds<RhsInt>: TryFrom<Self>, 

fn partial_cmp(&self, rhs: &Nanoseconds<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<Seconds<RhsInt>> for Seconds<T> where
    T: TryFrom<RhsInt>, 

fn partial_cmp(&self, rhs: &Seconds<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<Seconds<RhsInt>> for Hours<T> where
    Seconds<RhsInt>: TryFrom<Self>, 

fn partial_cmp(&self, rhs: &Seconds<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<Seconds<RhsInt>> for Minutes<T> where
    Seconds<RhsInt>: TryFrom<Self>, 

fn partial_cmp(&self, rhs: &Seconds<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<Seconds<RhsInt>> for Nanoseconds<T> where
    Self: TryFrom<Seconds<RhsInt>>, 

fn partial_cmp(&self, rhs: &Seconds<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<Seconds<RhsInt>> for Microseconds<T> where
    Self: TryFrom<Seconds<RhsInt>>, 

fn partial_cmp(&self, rhs: &Seconds<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, RhsInt: TimeInt> PartialOrd<Seconds<RhsInt>> for Milliseconds<T> where
    Self: TryFrom<Seconds<RhsInt>>, 

fn partial_cmp(&self, rhs: &Seconds<RhsInt>) -> Option<Ordering>

See Comparisons

#[must_use]fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T: TimeInt, Rhs: Duration> Rem<Rhs> for Seconds<T> where
    Self: TryFrom<Rhs>,
    Rhs: FixedPoint, 

type Output = Self

The resulting type after applying the % operator.

fn rem(self, rhs: Rhs) -> Self::Output

See Remainder

impl<T: TimeInt> StructuralEq for Seconds<T>

impl<T: TimeInt, Rhs: Duration> Sub<Rhs> for Seconds<T> where
    Self: TryFrom<Rhs>,
    Rhs: FixedPoint, 

type Output = Self

The resulting type after applying the - operator.

fn sub(self, rhs: Rhs) -> Self::Output

See Add/Sub

impl TryFrom<Duration> for Seconds<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(core_duration: Duration) -> Result<Self, Self::Error>

See Converting from core types

impl<SourceInt: TimeInt, DestInt: TimeInt> TryFrom<Generic<SourceInt>> for Seconds<DestInt> where
    DestInt: TryFrom<SourceInt>, 

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(generic_duration: Generic<SourceInt>) -> Result<Self, Self::Error>

See Converting from a Generic Duration

impl<T: TimeInt> TryFrom<Hours<T>> for Seconds<T>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: Hours<T>) -> Result<Self, Self::Error>

See Converting between Durations

impl TryFrom<Hours<u64>> for Seconds<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: Hours<u64>) -> Result<Self, Self::Error>

See Converting between Durations

impl TryFrom<Microseconds<u64>> for Seconds<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: Microseconds<u64>) -> Result<Self, Self::Error>

See Converting between Durations

impl TryFrom<Milliseconds<u64>> for Seconds<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: Milliseconds<u64>) -> Result<Self, Self::Error>

See Converting between Durations

impl<T: TimeInt> TryFrom<Minutes<T>> for Seconds<T>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: Minutes<T>) -> Result<Self, Self::Error>

See Converting between Durations

impl TryFrom<Minutes<u64>> for Seconds<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: Minutes<u64>) -> Result<Self, Self::Error>

See Converting between Durations

impl TryFrom<Nanoseconds<u64>> for Seconds<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: Nanoseconds<u64>) -> Result<Self, Self::Error>

See Converting between Durations

impl<T: TimeInt> TryFrom<Seconds<T>> for Nanoseconds<T>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: Seconds<T>) -> Result<Self, Self::Error>

See Converting between Durations

impl<T: TimeInt> TryFrom<Seconds<T>> for Microseconds<T>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: Seconds<T>) -> Result<Self, Self::Error>

See Converting between Durations

impl<T: TimeInt> TryFrom<Seconds<T>> for Milliseconds<T>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: Seconds<T>) -> Result<Self, Self::Error>

See Converting between Durations

impl TryFrom<Seconds<u32>> for Duration

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(duration: Seconds<u32>) -> Result<Self, Self::Error>

See Converting to core types

impl TryFrom<Seconds<u64>> for Seconds<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(source: Seconds<u64>) -> Result<Self, Self::Error>

See Converting between Durations

impl TryFrom<Seconds<u64>> for Hours<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: Seconds<u64>) -> Result<Self, Self::Error>

See Converting between Durations

impl TryFrom<Seconds<u64>> for Minutes<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(small: Seconds<u64>) -> Result<Self, Self::Error>

See Converting between Durations

impl TryFrom<Seconds<u64>> for Nanoseconds<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: Seconds<u64>) -> Result<Self, Self::Error>

See Converting between Durations

impl TryFrom<Seconds<u64>> for Microseconds<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: Seconds<u64>) -> Result<Self, Self::Error>

See Converting between Durations

impl TryFrom<Seconds<u64>> for Milliseconds<u32>

type Error = ConversionError

The type returned in the event of a conversion error.

fn try_from(big: Seconds<u64>) -> Result<Self, Self::Error>

See Converting between Durations