2026-06-12
14:02:00 | 19116:
arch, sched/signal:
Fix compilation with ENABLE_PA | esp32s3-xiao
:usbnsh | Killing pytest after timeout... |
2026-06-12
13:49:35 | 19116:
arch, sched/signal:
Fix compilation with ENABLE_PA | esp32p4-function-ev-board
:ethernet | (Same) |
2026-06-12
13:18:54 | 19116:
arch, sched/signal:
Fix compilation with ENABLE_PA | thingy91
:nsh_nrf52 | Ignored files:
(use "git add -f ..." to include in what will be committed)
drivers/segger/segger.su
drivers/segger/serial_rtt.su
drivers/segger/syslog_rtt.su
Ignored files:
(use "git add -f ..." to include in what will be committed)
system/uorb/sensor/accel.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/angle.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/baro.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor |
2026-06-12
11:51:28 | 19126:
fs/littlefs:
add block_size_factor mount option | esp32p4-function-ev-board
:crypto | Killing pytest after timeout... |
2026-06-12
11:44:18 | 19116:
arch, sched/signal:
Fix compilation with ENABLE_PA | sim
:lua | % To
t a l0 % 0R e c e i0v e d % 0X f e r d0 A v e r0a g e S p e0e d T i0m e- - : - -T:i-m-e - - : - -T:i-m-e - -C:u-rl-r :e -n -t
% R e c0e i v e d % X f e r d A v e r a g e S p e e d D lToiamde U p lToiamde Total Spent Left S p eTeidm
e
DloCurrent
:-- |
2026-06-12
11:19:26 | 19126:
fs/littlefs:
add block_size_factor mount option | thingy91
:nsh_nrf52 | Ignored files:
(use "git add -f ..." to include in what will be committed)
drivers/segger/segger.su
drivers/segger/serial_rtt.su
drivers/segger/syslog_rtt.su
Ignored files:
(use "git add -f ..." to include in what will be committed)
system/uorb/sensor/accel.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/angle.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/baro.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor |
2026-06-12
10:53:49 | 3539:
examples/thttpd:
use procfs for tasks CGI | lckfb-szpi-esp32s3
:fastboot_usb | Killing pytest after timeout... |
2026-06-12
10:51:00 | 19116:
arch, sched/signal:
Fix compilation with ENABLE_PA | nucleo-f302r8
:ihm07m1_f32 | (Unknown) |
2026-06-12
10:40:58 | 3539:
examples/thttpd:
use procfs for tasks CGI | esp32p4-function-ev-board
:timers | Killing pytest after timeout... |
2026-06-12
10:39:31 | 19116:
arch, sched/signal:
Fix compilation with ENABLE_PA | thingy91
:nsh_nrf52 | Ignored files:
(use "git add -f ..." to include in what will be committed)
drivers/segger/segger.su
drivers/segger/serial_rtt.su
drivers/segger/syslog_rtt.su
Ignored files:
(use "git add -f ..." to include in what will be committed)
system/uorb/sensor/accel.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/angle.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/baro.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor |
2026-06-12
10:19:02 | 19125:
!arch:
unify all STM32 ports public API | lckfb-szpi-esp32s3
:fastboot_usb | Killing pytest after timeout... |
2026-06-12
10:14:55 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32s3-xiao
:combo | (Same) |
2026-06-12
10:11:47 | 3539:
examples/thttpd:
use procfs for tasks CGI | thingy91
:nsh_nrf52 | Ignored files:
(use "git add -f ..." to include in what will be committed)
drivers/segger/segger.su
drivers/segger/serial_rtt.su
drivers/segger/syslog_rtt.su
Ignored files:
(use "git add -f ..." to include in what will be committed)
system/uorb/sensor/accel.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/angle.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/baro.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor |
2026-06-12
10:10:50 | 3539:
examples/thttpd:
use procfs for tasks CGI | stm32f103-minimum
:adb | Tota |
2026-06-12
10:04:32 | 19125:
!arch:
unify all STM32 ports public API | esp32p4-function-ev-board
:crypto | Killing pytest after timeout... |
2026-06-12
10:01:52 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32p4-function-ev-board
:adc | (Same) |
2026-06-12
09:53:50 | 3538:
ostest:
Fix ostest for CONFIG_ENABLE_PARTIAL_SIGNA | esp32s3-xiao
:combo | (Same) |
2026-06-12
09:42:34 | 3538:
ostest:
Fix ostest for CONFIG_ENABLE_PARTIAL_SIGNA | esp32p4-function-ev-board
:adc | (Same) |
2026-06-12
09:36:55 | 19125:
!arch:
unify all STM32 ports public API | thingy91
:nsh_nrf52 | Ignored files:
(use "git add -f ..." to include in what will be committed)
drivers/segger/segger.su
drivers/segger/serial_rtt.su
drivers/segger/syslog_rtt.su
Ignored files:
(use "git add -f ..." to include in what will be committed)
system/uorb/sensor/accel.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/angle.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/baro.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor |
2026-06-12
09:28:54 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | thingy91
:nsh_nrf52 | (Same) |
2026-06-12
09:12:28 | 3538:
ostest:
Fix ostest for CONFIG_ENABLE_PARTIAL_SIGNA | thingy91
:nsh_nrf52 | (Same) |
2026-06-12
09:09:04 | 19116:
arch, sched/signal:
Fix compilation with ENABLE_PA | unknown
:unknown | (Build Job arm-08 failed to start) |
2026-06-12
09:05:42 | 19116:
arch, sched/signal:
Fix compilation with ENABLE_PA | sim
:lua | me
0T i m e 0C u r r e0n t |
2026-06-12
08:56:39 | 3538:
ostest:
Fix ostest for CONFIG_ENABLE_PARTIAL_SIGNA | stm32f103-minimum
:adb | t
D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnetn t L eLfetf t S pSepeede
d |
2026-06-12
08:36:39 | 3539:
examples/thttpd:
use procfs for tasks CGI | sim
:lua | rent |
2026-06-12
08:20:14 | 19125:
!arch:
unify all STM32 ports public API | lx_cpu
:nsh | arm-none-eabi-ld: arm-none-eabi-ld: warning: /github/workspace/sources/apps/bin/hello has a LOAD segment with RWX permissions
warning: /github/workspace/sources/apps/bin/errno has a LOAD segment with RWX permissions |
2026-06-12
08:13:53 | 3539:
examples/thttpd:
use procfs for tasks CGI | sim
:lua | u r r e n t
e e d |
2026-06-12
08:01:57 | 19125:
!arch:
unify all STM32 ports public API | sim
:lua | a g e S p e e d T ime Time D l oTaidm e U pCluorarde n t
T o t a l S p e n t L e f t Speed |
2026-06-12
07:56:17 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | sim
:lua | r e n%t
R e c0 e i v e d % 0X f e r d 0 A verage Speed T i m e 0 0 T i m e 0 D l oTai d m e0U p l oCa ud r0 r e- n-Tto:
t- a -l : - - - S- p:e -n -t : - - -L -e :f - t- : -S -p e e d 0
Dl
o a d0 U p l o0a d 0 T o t a l0 S 0p e n t 0 L e f t0 S p e e0d |
2026-06-12
07:44:31 | 19116:
arch, sched/signal:
Fix compilation with ENABLE_PA | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvveeerrraaagggeee SSSpppeeeeeeddd TTTiiimmmeee TTTiiimmmeee TTiimmee CCuurrrreenntt
T i m e C u r r e n t
D lD ol ao da d U pU lp ol ao da d DT loTootatadal l U p SlSpopeaendnt t T o LtLeaeflft t S SpSpepeeeednd
t
L e00f t S p00e e d
00 |
2026-06-12
07:19:25 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | sim
:lua | % To % Total % Received % Xferd Average Speed Time Time Time Current |
2026-06-12
06:36:17 | 19124:
net/devif:
harden devif_conn_event() against list | esp32s3-xiao
:combo | Killing pytest after timeout... |
2026-06-12
06:22:42 | 19124:
net/devif:
harden devif_conn_event() against list | esp32p4-function-ev-board
:i2c | (Same) |
2026-06-12
05:50:06 | 19124:
net/devif:
harden devif_conn_event() against list | stm32f103-minimum
:adb | t
D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnetn t L eLfetf t S pSepeede
d |
2026-06-12
05:47:39 | 19124:
net/devif:
harden devif_conn_event() against list | thingy91
:nsh_nrf52 | Ignored files:
(use "git add -f ..." to include in what will be committed)
drivers/segger/segger.su
drivers/segger/serial_rtt.su
drivers/segger/syslog_rtt.su
Ignored files:
(use "git add -f ..." to include in what will be committed)
system/uorb/sensor/accel.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/angle.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/baro.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor |
2026-06-12
04:54:28 | 19124:
net/devif:
harden devif_conn_event() against list | esp32c6-devkitc
:mcuboot_update_agent | d Average Speed Time Time Time Current |
2026-06-12
04:17:40 | 19113:
avr/avrdx:
Fixup contributions from KR to NuttX V1 | esp32s3-ws-lcd128
:touch-lvgl | Killing pytest after timeout... |
2026-06-12
04:15:02 | 19124:
net/devif:
harden devif_conn_event() against list | sim
:lua | ferd |
2026-06-12
04:07:47 | 19113:
avr/avrdx:
Fixup contributions from KR to NuttX V1 | esp32p4-function-ev-board
:autopm | Killing pytest after timeout... |
2026-06-12
03:40:49 | 3531:
examples/elf:
extend nxpkg validation coverage | lckfb-szpi-esp32s3
:gpio | (Same) |
2026-06-12
03:37:22 | 3526:
examples/sotest:
support packaged shared library f | esp32s3-ws-lcd128
:touch-lvgl | (Same) |
2026-06-12
03:37:12 | 19113:
avr/avrdx:
Fixup contributions from KR to NuttX V1 | thingy91
:nsh_nrf52 | Ignored files:
(use "git add -f ..." to include in what will be committed)
drivers/segger/segger.su
drivers/segger/serial_rtt.su
drivers/segger/syslog_rtt.su
Ignored files:
(use "git add -f ..." to include in what will be committed)
system/uorb/sensor/accel.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/angle.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/baro.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor |
2026-06-12
03:35:35 | 19113:
avr/avrdx:
Fixup contributions from KR to NuttX V1 | stm32f103-minimum
:adb | t
D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnetn t L eLfetf t S pSepeede
d |
2026-06-12
03:35:32 | 3519:
apps:
add missing module metadata for executable t | lckfb-szpi-esp32s3
:gpio | Killing pytest after timeout... |
2026-06-12
03:34:54 | 3531:
examples/elf:
extend nxpkg validation coverage | lckfb-szpi-esp32s3
:txtable | --:-- 0 |
2026-06-12
03:26:35 | 3531:
examples/elf:
extend nxpkg validation coverage | esp32p4-function-ev-board
:random | Killing pytest after timeout... |
2026-06-12
03:25:40 | 3526:
examples/sotest:
support packaged shared library f | esp32p4-function-ev-board
:ethernet | (Same) |
2026-06-12
03:25:27 | 3519:
apps:
add missing module metadata for executable t | esp32p4-function-ev-board
:adc | (Same) |
2026-06-12
02:57:41 | 3526:
examples/sotest:
support packaged shared library f | stm32f103-minimum
:adb | d |
2026-06-12
02:56:12 | 3531:
examples/elf:
extend nxpkg validation coverage | thingy91
:nsh_nrf52 | Ignored files:
(use "git add -f ..." to include in what will be committed)
drivers/segger/segger.su
drivers/segger/serial_rtt.su
drivers/segger/syslog_rtt.su
Ignored files:
(use "git add -f ..." to include in what will be committed)
system/uorb/sensor/accel.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/angle.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/baro.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor |
2026-06-12
02:54:52 | 3526:
examples/sotest:
support packaged shared library f | thingy91
:nsh_nrf52 | (Same) |
2026-06-12
02:49:36 | 3519:
apps:
add missing module metadata for executable t | thingy91
:nsh_nrf52 | (Same) |
2026-06-12
02:44:04 | 3536:
testing/sig_sp_test:
add test for SP context resto | esp32s3-ws-lcd128
:touch-lvgl | Killing pytest after timeout... |
2026-06-12
02:04:36 | 19113:
avr/avrdx:
Fixup contributions from KR to NuttX V1 | sim
:lua | D load %U pload Total Spent % TotT Left Speed |
2026-06-12
01:58:39 | 3536:
testing/sig_sp_test:
add test for SP context resto | thingy91
:nsh_nrf52 | Ignored files:
(use "git add -f ..." to include in what will be committed)
drivers/segger/segger.su
drivers/segger/serial_rtt.su
drivers/segger/syslog_rtt.su
Ignored files:
(use "git add -f ..." to include in what will be committed)
system/uorb/sensor/accel.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/angle.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/baro.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor |
2026-06-12
01:21:45 | 3519:
apps:
add missing module metadata for executable t | sim
:lua | e e d T i m e T i m e T i m e C u r r eDnlto
a d % T o t a l D l o%a dR e cUepilvoeadd % XTfoetradl A vSepreangte S p eLeedf t TSipmeee d
Ti
m e 0 T iU m0pe l o a Cd0 u r rT eo nt0ta
l 0 S p e n t 0 L e f 0t S p e e 0d
- - :
- - :0 - - D- l- o:0a- d- : - U-0p l- o-a:d- - :T-o-t a l 0Spent Left Speed |
2026-06-12
01:14:35 | 19123:
armv7-m/armv8-m:
honor SP modifications on excepti | thingy91
:nsh_nrf52 | Ignored files:
(use "git add -f ..." to include in what will be committed)
drivers/segger/segger.su
drivers/segger/serial_rtt.su
drivers/segger/syslog_rtt.su
Ignored files:
(use "git add -f ..." to include in what will be committed)
system/uorb/sensor/accel.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/angle.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/baro.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor |
2026-06-11
22:19:19 | 19118:
sched/group:
implement saved-set-UID/GID semantics | esp32s3-ws-lcd128
:touch-lvgl | Killing pytest after timeout... |
2026-06-11
21:46:02 | 3537:
Feature/python support nuttx periphery | esp32s3-xiao
:combo | (Same) |
2026-06-11
21:37:11 | 19118:
sched/group:
implement saved-set-UID/GID semantics | stm32f103-minimum
:adb | % To tDallo a d %U pRleocaedi v e dT o%t aXlf e r dS p enAtv e r a gLee fStp e eSdp ee d
Time |
2026-06-11
21:36:40 | 19118:
sched/group:
implement saved-set-UID/GID semantics | thingy91
:nsh_nrf52 | Ignored files:
(use "git add -f ..." to include in what will be committed)
drivers/segger/segger.su
drivers/segger/serial_rtt.su
drivers/segger/syslog_rtt.su
Ignored files:
(use "git add -f ..." to include in what will be committed)
system/uorb/sensor/accel.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/angle.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/baro.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor |
2026-06-11
21:31:07 | 3537:
Feature/python support nuttx periphery | esp32p4-function-ev-board
:timers | Killing pytest after timeout... |
2026-06-11
21:17:34 | 3537:
Feature/python support nuttx periphery | esp32s3-devkit
:adb | % |
2026-06-11
20:48:48 | 3537:
Feature/python support nuttx periphery | thingy91
:nsh_nrf52 | Ignored files:
(use "git add -f ..." to include in what will be committed)
drivers/segger/segger.su
drivers/segger/serial_rtt.su
drivers/segger/syslog_rtt.su
Ignored files:
(use "git add -f ..." to include in what will be committed)
system/uorb/sensor/accel.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/angle.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/baro.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor |
2026-06-11
20:29:58 | 19122:
fs/binfmt:
Enforce POSIX execute permissions prior | esp32s3-xiao
:usbnsh | Killing pytest after timeout... |
2026-06-11
20:13:55 | 19122:
fs/binfmt:
Enforce POSIX execute permissions prior | esp32p4-function-ev-board
:ethernet | (Same) |
2026-06-11
20:04:19 | 19118:
sched/group:
implement saved-set-UID/GID semantics | sim
:lua | c e i v e d % X f e r d A v e ra g e S p e e d DTliomae d UTipmloea d TTiomet al C u rSrpeenntt
L e f t S p e e d |
2026-06-11
19:46:00 | 19122:
fs/binfmt:
Enforce POSIX execute permissions prior | stm32f103-minimum
:adb | Dl o a d DUlpolaoda d U p lTooatda l T oStpaeln t S p eLnetf t SLpeefetd
Spe
e d |
2026-06-11
19:45:45 | 19122:
fs/binfmt:
Enforce POSIX execute permissions prior | thingy91
:nsh_nrf52 | Ignored files:
(use "git add -f ..." to include in what will be committed)
drivers/segger/segger.su
drivers/segger/serial_rtt.su
drivers/segger/syslog_rtt.su
Ignored files:
(use "git add -f ..." to include in what will be committed)
system/uorb/sensor/accel.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/angle.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/baro.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor |
2026-06-11
19:27:40 | 3537:
Feature/python support nuttx periphery | sim
:lua | % T o % Total % Received % Xferd Average Speed Time Time Time Current |
2026-06-11
18:09:32 | 19122:
fs/binfmt:
Enforce POSIX execute permissions prior | sim
:lua | Ra eg ce e iS vp ee de d % X fT ei rm de A v eT ri am ge e S T i m eD l oCaudr r eUpnpetle
od a d T i Tm oe t a l T iSmpeen t TL iem fe t C Su pr er ee dn
t
0 D 0l o a d 0 U p l o a0 d T0 o t a l 0D lS op ae dn t 0U p l oL ae df t0 -T-So:pt-ea-el:d -
- S-p-
e: n-t- : - - L-e-f:t- - :S-p-e e d |
2026-06-11
17:25:57 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | lckfb-szpi-esp32s3
:gpio | Killing pytest after timeout... |
2026-06-11
17:21:22 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32p4-function-ev-board
:timers | (Same) |
2026-06-11
16:39:55 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | thingy91
:nsh_nrf52 | Ignored files:
(use "git add -f ..." to include in what will be committed)
drivers/segger/segger.su
drivers/segger/serial_rtt.su
drivers/segger/syslog_rtt.su
Ignored files:
(use "git add -f ..." to include in what will be committed)
system/uorb/sensor/accel.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/angle.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/baro.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor |
2026-06-11
16:30:09 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f103-minimum
:adb | D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnetn t L eLfet f tS p eSepde
ed |
2026-06-11
16:23:56 | 19122:
fs/binfmt:
Enforce POSIX execute permissions prior | lckfb-szpi-esp32s3
:gpio | Killing pytest after timeout... |
2026-06-11
16:14:03 | 19122:
fs/binfmt:
Enforce POSIX execute permissions prior | esp32p4-function-ev-board
:autopm | (Same) |
2026-06-11
16:12:56 | 19121:
libs/libc/pthread/pthread_mutex:
Fix robust mutex | esp32s3-ws-lcd128
:touch-lvgl | (Same) |
2026-06-11
15:59:50 | 19121:
libs/libc/pthread/pthread_mutex:
Fix robust mutex | esp32p4-function-ev-board
:ulp | (Same) |
2026-06-11
15:44:34 | 19122:
fs/binfmt:
Enforce POSIX execute permissions prior | thingy91
:nsh_nrf52 | Ignored files:
(use "git add -f ..." to include in what will be committed)
drivers/segger/segger.su
drivers/segger/serial_rtt.su
drivers/segger/syslog_rtt.su
Ignored files:
(use "git add -f ..." to include in what will be committed)
system/uorb/sensor/accel.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/angle.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/baro.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor |
2026-06-11
15:11:51 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | sim
:lua | ime Time Time Cu rrDelnota
d U p l o a d T o t a l S p e n t Left Speed
0 D0l o a d 0 U p l o a0 d 0T o t a l 0 S pe%n tR e c e iLveefdt % SXpfeeerdd
Averag
e S0p e e d 0 T i m e0 T i0m e 0 T i m e0 C u r r e0n t
0 - - : - - : - - - - : - - : - - - - : - - : - - D l o a0d Upload Total Spent Left Speed |
2026-06-11
14:10:46 | 19122:
fs/binfmt:
Enforce POSIX execute permissions prior | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %% XXffeerrdd AAvveerraaggee SSpepeede d T% i TmXiefm ee r d T iATmvieem re a g e TS ipTmeieem de C u CrTuriremrneet n
t
T i m e T i m e C u r r e n t
D l oa dD l oUapdl o aUdp l o aTdo t a lT o t aSlp e n tS p e n tL e f t L eSfpte e dS
peed |
2026-06-11
13:57:04 | 19121:
libs/libc/pthread/pthread_mutex:
Fix robust mutex | sim
:lua | 0 % Tota0 Ti me Time Time Current
p e e d
-:- |
2026-06-11
13:36:09 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32p4-function-ev-board
:watchdog | Killing pytest after timeout... |
2026-06-11
12:05:36 | 19118:
sched/group:
implement saved-set-UID/GID semantics | lckfb-szpi-esp32s3
:gpio | (Same) |
2026-06-11
11:55:09 | 19118:
sched/group:
implement saved-set-UID/GID semantics | esp32p4-function-ev-board
:timers | (Same) |
2026-06-11
10:18:17 | 19119:
arch/nrf91:
add PWM support | nrf5340-dk
:composite_cpuapp | CMake Error at /github/workspace/sources/nuttx/build/_deps/argtable3-subbuild/argtable3-populate-prefix/src/argtable3-populate-stamp/download-argtable3-populate.cmake:170 (message):
Each download failed!
error: downloading 'https://github.com/argtable/argtable3/archive/v3.2.0.7402e6e.tar.gz' failed
status_code: 28
status_string: "Timeout was reached"
log:
--- LOG BEGIN ---
Trying 140.82.112.4:443...
Connection timed out after 30001 milliseconds
Closing connection 0
--- LOG EN |
2026-06-11
09:42:50 | 19118:
sched/group:
implement saved-set-UID/GID semantics | sim
:lua | T i m e T iDmleo a Cdu r rUepnlto
a d T o t a l Spent Left Speed |
2026-06-11
08:26:29 | 19116:
arch, sched/signal:
Fix compilation with ENABLE_PA | lckfb-szpi-esp32s3
:psram | Killing pytest after timeout... |
2026-06-11
08:12:52 | 19116:
arch, sched/signal:
Fix compilation with ENABLE_PA | esp32p4-function-ev-board
:qencoder | (Same) |
2026-06-11
07:43:36 | 19116:
arch, sched/signal:
Fix compilation with ENABLE_PA | thingy91
:nsh_nrf52 | Ignored files:
(use "git add -f ..." to include in what will be committed)
drivers/segger/segger.su
drivers/segger/serial_rtt.su
drivers/segger/syslog_rtt.su
Ignored files:
(use "git add -f ..." to include in what will be committed)
system/uorb/sensor/accel.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/angle.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/baro.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor |
2026-06-11
07:35:34 | 19116:
arch, sched/signal:
Fix compilation with ENABLE_PA | stm32f103-minimum
:adb | n t
D l oDaldo a dU p lUopaldo a d T o tTaolt a l S p eSnpte n t L e fLte f tS p eSepde
ed |
2026-06-11
06:08:29 | 19116:
arch, sched/signal:
Fix compilation with ENABLE_PA | sim
:lua | Dloa % Total % dR e cUepilvoeadd % XTfoetradl A vSepreangte S p eLeedf t TSipmeee d
Ti
m e 0 0 0 0 0 0 T i m0e C u r r0e n-t-
urrent
-- |
2026-06-10
21:27:25 | 19019:
boards/xtensa/espressif:
Fix crypto hash tests for | esp32-2432S028
:lvgl | Killing pytest after timeout... |
2026-06-10
20:54:05 | 19114:
!arch:
unify stm32 hardware definition names | esp32s3-devkit
:toywasm | (Same) |
2026-06-10
20:51:07 | 19019:
boards/xtensa/espressif:
Fix crypto hash tests for | esp32-devkitc
:crypto | ##[error]hash.c:264:28: error: 'sha224_huge_block_result' defined but not used [-Werror=unused-const-variable=]
264 | static const unsigned char sha224_huge_block_result[28] =
| ^~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[2]: *** [/github/workspace/sources/apps/Application.mk:330: hash.c.github.workspace.sources.apps.testing.drivers.crypto.o] Error 1
make[2]: Target 'all' not remade because of errors.
make[1]: *** [Makefile:54: /github |
2026-06-10
20:27:27 | 19113:
avr/avrdx:
Fixup contributions from KR to NuttX V1 | lckfb-szpi-esp32s3
:fastboot_tcp | Killing pytest after timeout... |
2026-06-10
20:19:17 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f103-minimum
:sensors | ##[error]common/stm32/stm32_tim.c:674:13: error: 'stm32_tim_gpioconfig' defined but not used [-Werror=unused-function]
674 | static void stm32_tim_gpioconfig(uint32_t cfg, stm32_tim_channel_t mode)
| ^~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[1]: *** [Makefile:179: stm32_tim.o] Error 1
make[1]: Target 'libarch.a' not remade because of errors.
make: *** [tools/LibTargets.mk:170: arch/arm/src/libarch.a] Error 2
make: Target 'all' not remade because of |
2026-06-10
20:18:54 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm3210e-eval
:pm | (Same) |
2026-06-10
20:18:17 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f103-minimum
:adb | D lo aTdi m eU p lCouardr en t
T o t a l S pe n t Le f t S p ee d
:-- |
2026-06-10
20:17:19 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f103-minimum
:audio_tone | (Unknown) |
2026-06-10
20:17:11 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | nucleo-f446re
:jumbo | ##[error]common/stm32/stm32_pulsecount.c:1246:12: error: 'pulsecount_interrupt' defined but not used [-Werror=unused-function]
1246 | static int pulsecount_interrupt(struct pulsecount_lowerhalf_s *dev)
| ^~~~~~~~~~~~~~~~~~~~
##[error]common/stm32/stm32_pulsecount.c:313:38: error: 'g_pulsecountops' defined but not used [-Werror=unused-const-variable=]
313 | static const struct pulsecount_ops_s g_pulsecountops =
| ^~~~~~~~~~~~~~~
cc1: all warni |
2026-06-10
20:15:08 | 19113:
avr/avrdx:
Fixup contributions from KR to NuttX V1 | esp32p4-function-ev-board
:pwm | Killing pytest after timeout... |
2026-06-10
20:07:04 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | olimexino-stm32
:nsh | ##[error]common/stm32/stm32_tim.c:674:13: error: unused function 'stm32_tim_gpioconfig' [-Werror,-Wunused-function]
674 | static void stm32_tim_gpioconfig(uint32_t cfg, stm32_tim_channel_t mode)
| ^~~~~~~~~~~~~~~~~~~~
1 error generated.
make[1]: *** [Makefile:179: stm32_tim.o] Error 1
make[1]: Target 'libarch.a' not remade because of errors.
make: *** [tools/LibTargets.mk:170: arch/arm/src/libarch.a] Error 2
make: Target 'all' not remade because of errors. |
2026-06-10
20:06:20 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | olimexino-stm32
:smallnsh | (Same) |
2026-06-10
20:05:36 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | olimexino-stm32
:tiny | (Same) |
2026-06-10
20:04:49 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | olimexino-stm32
:composite | (Same) |
2026-06-10
20:04:24 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | olimexino-stm32
:can | (Same) |
2026-06-10
19:59:33 | 19113:
avr/avrdx:
Fixup contributions from KR to NuttX V1 | esp32-wrover-kit
:gpio | Killing pytest after timeout... |
2026-06-10
19:49:21 | 19114:
!arch:
unify stm32 hardware definition names | lckfb-szpi-esp32s3
:adb | Dlo 0ad Upload Total Spent Left Speed |
2026-06-10
19:43:18 | 19113:
avr/avrdx:
Fixup contributions from KR to NuttX V1 | stm32f103-minimum
:adb | D lDolaoda d U pUlpolaoda d T oTtoatla l Sp eSnpte n t L ef tL e fStp e eSdp
eed |
2026-06-10
19:38:56 | 19019:
boards/xtensa/espressif:
Fix crypto hash tests for | sim
:lua | 0 tal0 % Received % Xferd Average Speed Time Time Time Current |
2026-06-10
19:05:20 | 19115:
arch/arm/src/stm32f7:
remove duplicated stm32_exti | stm32f103-minimum
:adb | D load Upload T o t a l S p e n t L eDflto a dS p eUepdl
oad
T o0t a l 0S p e n t0 L e0f t S0p e e d |
2026-06-10
18:58:28 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32-sparrow-kit
:wifi | 0 % Total % Received % Xferd Average Speed Time Time Time Current |
2026-06-10
18:51:09 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | sim
:lua | e
T i m0e C u r r0e n t |
2026-06-10
18:38:02 | 19114:
!arch:
unify stm32 hardware definition names | sim
:lua | e S p e e d T i m e T i mDel o a d TUipmleo a dC u r rTeontta
l S p ent Left S p e e d
-- |
2026-06-10
18:11:08 | 19113:
avr/avrdx:
Fixup contributions from KR to NuttX V1 | sim
:lua | e i v e d % X f e r d A v e r a g e S p e e d TDilmoead U pTliomaed T oTtiamle CSuprernetn t
L e f t S p e e d |
2026-06-10
17:52:31 | 19023:
boards/arm/stm32/nucleo:
Fix BBSRAM compilation | esp32s3-devkit
:adb | Dl % Total % Received % Xfeoad rd Average Speed Time Time Time Current |
2026-06-10
17:49:43 | 19023:
boards/arm/stm32/nucleo:
Fix BBSRAM compilation | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-10
17:39:20 | 19023:
boards/arm/stm32/nucleo:
Fix BBSRAM compilation | esp32p4-function-ev-board
:tickless | (Same) |
2026-06-10
17:17:41 | 19112:
arch/arm/gd32f4:
fix missing CTL selector bits in | stm32f103-minimum
:adb | t
DDllooada d U pUlpolaoda d T oTtoatla l SSppeenntt LLeefftt SSppeeeedd |
2026-06-10
17:16:26 | 19023:
boards/arm/stm32/nucleo:
Fix BBSRAM compilation | stm32f103-minimum
:adb | 0 e d 0 T i m0e T0i m 0 e 0 T i m0e C u0r r--e:n--t: |
2026-06-10
17:01:12 | 19023:
boards/arm/stm32/nucleo:
Fix BBSRAM compilation | rv-virt
:kfb64 | 0xc0101009 adjusted to 0xc010100c |
2026-06-10
16:51:59 | 19110:
fs/vfs/fs_lock.c:
fix behavior according to manual | esp32p4-function-ev-board
:gpio | Killing pytest after timeout... |
2026-06-10
16:38:42 | 19023:
boards/arm/stm32/nucleo:
Fix BBSRAM compilation | lckfb-szpi-esp32s3
:fastboot_tcp | --
: - -0: - - 0 0 0 |
2026-06-10
16:33:23 | 19110:
fs/vfs/fs_lock.c:
fix behavior according to manual | esp32-wrover-kit
:wifi | Killing pytest after timeout... |
2026-06-10
16:19:52 | 19110:
fs/vfs/fs_lock.c:
fix behavior according to manual | thingy91
:nsh_nrf52 | Ignored files:
(use "git add -f ..." to include in what will be committed)
drivers/segger/segger.su
drivers/segger/serial_rtt.su
drivers/segger/syslog_rtt.su
Ignored files:
(use "git add -f ..." to include in what will be committed)
system/uorb/sensor/accel.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/angle.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/baro.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor |
2026-06-10
16:14:02 | 19109:
include/pthread :
initialize wait_count in PTHREAD | esp32s3-devkit
:watchdog | Killing pytest after timeout... |
2026-06-10
15:57:36 | 19109:
include/pthread :
initialize wait_count in PTHREAD | esp32p4-function-ev-board
:autopm | (Same) |
2026-06-10
15:27:48 | 19023:
boards/arm/stm32/nucleo:
Fix BBSRAM compilation | sim
:lua | ime
e Dload Uplo ad Total Time Current
:-- |
2026-06-10
15:02:51 | 19107:
timers/rtc:
Fix non-atomic clock read when splitti | esp32s3-devkit
:oneshot | Killing pytest after timeout... |
2026-06-10
14:45:49 | 19110:
fs/vfs/fs_lock.c:
fix behavior according to manual | sim
:lua | A v e r a g e S p eDeldo a d T iUpmleoa d TTime o t a lT i m eS p eCnutrr e n t Left Speed |
2026-06-10
14:12:47 | 19107:
timers/rtc:
Fix non-atomic clock read when splitti | esp32-sparrow-kit
:wifi | Time Time Time Current |
2026-06-10
14:02:27 | 19106:
{bp-19068} sched/Kconfig:
Fix ETC_ROMFS dependency | esp32s3-devkit
:pwm | Killing pytest after timeout... |
2026-06-10
13:56:01 | 19106:
{bp-19068} sched/Kconfig:
Fix ETC_ROMFS dependency | esp32p4-function-ev-board
:adc | (Same) |
2026-06-10
13:49:56 | 19109:
include/pthread :
initialize wait_count in PTHREAD | sim
:lua | %%%% TTTToooottttaaaallll % %% % R RReReececceceeieiivivveveededd d % %% % X XXfXffefeererrdrdd d A AAvAvveveererraraagaggegee e S SSpSppepeeeeeededd d T TTiTiimimmemee e T TTiTiimimmemee e T TTiTiimimmemee e C CCuCuururrrrrrereenenntntt
t
D DlDDlolloaooadaad dd U UpUUplpplolloaooadaad dd T ToTTotootattalaal ll S SpSSpeppeneentnnt tt L LeLLefeeftfft tt S SpSSpeppeeeeedeed
dd |
2026-06-10
13:46:42 | 19104:
{bp-19065} !sensors/bme680:
allow sensor configura | esp32s3-devkit
:fastboot | Killing pytest after timeout... |
2026-06-10
13:43:56 | 19103:
{bp-19051} drivers/contactless/pn532:
Fix potentia | esp32s3-devkit
:oneshot | (Same) |
2026-06-10
13:43:21 | 19101:
{bp-19047} video/fb:
Trigger updatearea() if CONFI | esp32s3-devkit
:toywasm | (Same) |
2026-06-10
13:42:57 | 19104:
{bp-19065} !sensors/bme680:
allow sensor configura | esp32p4-function-ev-board
:autopm | (Same) |
2026-06-10
13:42:47 | 19098:
{bp-19044} include/nuttx/semaphore.h:
parenthesize | esp32s3-devkit
:toywasm | (Same) |
2026-06-10
13:41:34 | 19103:
{bp-19051} drivers/contactless/pn532:
Fix potentia | esp32p4-function-ev-board
:timers | (Same) |
2026-06-10
13:41:34 | 19101:
{bp-19047} video/fb:
Trigger updatearea() if CONFI | esp32p4-function-ev-board
:adc | (Same) |
2026-06-10
13:33:54 | 19098:
{bp-19044} include/nuttx/semaphore.h:
parenthesize | esp32p4-function-ev-board
:adc | (Same) |
2026-06-10
13:09:05 | 19095:
{bp-19038} drivers/mmcsd/mmcsd_sdio.c:
guard SDIO_ | esp32s3-devkit
:adb | (Same) |
2026-06-10
13:08:17 | 19092:
{bp-19031} drivers/segger:
Download systemview fro | esp32s3-devkit
:ksta_softap | (Same) |
2026-06-10
13:04:02 | 19106:
{bp-19068} sched/Kconfig:
Fix ETC_ROMFS dependency | stm32f103-minimum
:adb | DDllooaadd UUpplloaoda d T oTtotaall SSppeenntt LLeefftt SSppeeeedd |
2026-06-10
13:03:29 | 19095:
{bp-19038} drivers/mmcsd/mmcsd_sdio.c:
guard SDIO_ | esp32p4-function-ev-board
:pwm | Killing pytest after timeout... |
2026-06-10
13:02:36 | 19092:
{bp-19031} drivers/segger:
Download systemview fro | esp32p4-function-ev-board
:qencoder | (Same) |
2026-06-10
13:02:18 | 19104:
{bp-19065} !sensors/bme680:
allow sensor configura | stm32f103-minimum
:adb | d T i m e T i m e T i m e C u r r e n tD
l o a d U p l o a d Total Spent Left Speed |
2026-06-10
12:57:55 | 19090:
{bp-19025} workflows/build.yml:
Fix Skipping sim\w | esp32s3-ws-lcd128
:touch-lvgl | Killing pytest after timeout... |
2026-06-10
12:53:33 | 19097:
{bp-19043} mm/kasan:
Fix compile options applied t | stm32f429i-disco
:systemview | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of segger/SystemView_Src_V356.zip or
segger/SystemView_Src_V356.zip.zip, and cannot find segger/SystemView_Src_V356.zip.ZIP, period.
make[1]: *** [segger/Make.defs:84: segger/SystemView_Src_V"356".zip |
2026-06-10
12:37:48 | 19097:
{bp-19043} mm/kasan:
Fix compile options applied t | stm32f103-minimum
:adb | ed |
2026-06-10
12:31:38 | 19089:
{bp-19023} boards/arm/stm32/nucleo:
Fix BBSRAM com | esp32s3-devkit
:adb | Killing pytest after timeout... |
2026-06-10
12:28:21 | 19089:
{bp-19023} boards/arm/stm32/nucleo:
Fix BBSRAM com | esp32p4-function-ev-board
:rmt | (Same) |
2026-06-10
12:24:00 | 19084:
{bp-19018} drivers/mtd:
Remove bad block managemen | esp32s3-ws-lcd128
:touch-lvgl | (Same) |
2026-06-10
12:20:39 | 19086:
{bp-19020} drivers/mmcsd:
Remove eMMC partitions w | stm32f429i-disco
:systemview | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of segger/SystemView_Src_V356.zip or
segger/SystemView_Src_V356.zip.zip, and cannot find segger/SystemView_Src_V356.zip.ZIP, period.
make[1]: *** [segger/Make.defs:84: segger/SystemView_Src_V"356".zip |
2026-06-10
12:18:24 | 19086:
{bp-19020} drivers/mmcsd:
Remove eMMC partitions w | esp32p4-function-ev-board
:random | Killing pytest after timeout... |
2026-06-10
12:16:29 | 19089:
{bp-19023} boards/arm/stm32/nucleo:
Fix BBSRAM com | qemu-armv7a
:full | CMake Error at /github/workspace/sources/nuttx/build/_deps/libcxxabi-subbuild/libcxxabi-populate-prefix/src/libcxxabi-populate-stamp/download-libcxxabi-populate.cmake:170 (message):
Each download failed!
error: downloading 'https://github.com/llvm/llvm-project/releases/download/llvmorg-17.0.6/libcxxabi-17.0.6.src.tar.xz' failed
status_code: 28
status_string: "Timeout was reached"
log:
--- LOG BEGIN ---
Trying 140.82.116.4:443...
Connected to github.com (140.82.116.4) port 443 (#0) |
2026-06-10
12:13:26 | 19081:
{bp-19014} driver/serial:
Fix/uart tcdrain bugs | esp32s3-ws-lcd128
:touch-lvgl | Killing pytest after timeout... |
2026-06-10
12:07:30 | 19089:
{bp-19023} boards/arm/stm32/nucleo:
Fix BBSRAM com | stm32f103-minimum
:adb | C u r r e n t
D l o a d U pDllooaadd UTpoltoaald STpoetnatl SLpeefntt S p eLeedf
t Spe
e d |
2026-06-10
12:01:24 | 19100:
{bp-19046} arch/nrf91:
add more ioctl calls for mo | sim
:segger | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of segger/SystemView_Src_V356.zip or
segger/SystemView_Src_V356.zip.zip, and cannot find segger/SystemView_Src_V356.zip.ZIP, period.
make[1]: *** [segger/Make.defs:84: segger/SystemView_Src_V"356".zip |
2026-06-10
11:58:54 | 19083:
{bp-19016} libs/libc/dirent:
preserve errno on rea | esp32s3-xiao
:usbnsh | Killing pytest after timeout... |
2026-06-10
11:48:57 | 19084:
{bp-19018} drivers/mtd:
Remove bad block managemen | esp32p4-function-ev-board
:tickless | (Same) |
2026-06-10
11:48:07 | 19083:
{bp-19016} libs/libc/dirent:
preserve errno on rea | esp32p4-function-ev-board
:ulp | (Same) |
2026-06-10
11:47:51 | 19081:
{bp-19014} driver/serial:
Fix/uart tcdrain bugs | esp32p4-function-ev-board
:ethernet | (Same) |
2026-06-10
11:47:13 | 19092:
{bp-19031} drivers/segger:
Download systemview fro | lckfb-szpi-esp32s3
:es7210 | % Dload UploRad Teceived % otal Spent Left Speed |
2026-06-10
11:32:40 | 19087:
{bp-19021} boards/lckfb-szpi-esp32s3:
switch adb c | esp32s3-devkit
:wifi | 0 % Total % Received % Xferd Average Speed Time Time Time Current |
2026-06-10
11:21:16 | 19087:
{bp-19021} boards/lckfb-szpi-esp32s3:
switch adb c | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-10
11:16:28 | 19106:
{bp-19068} sched/Kconfig:
Fix ETC_ROMFS dependency | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvveeerrraaagggeee SSSpppeeeeeeddd TTTiiimmmeee TTTiiimmmeee TTTiiimmmeee CCCuuurrrrrreeennnttt
DDDllloooaaaddd UUUpppllloooaaaddd TTToootttaaalll SSSpppeeennnttt LLLeeefffttt SSSpppeeeeeeddd |
2026-06-10
11:14:59 | 19085:
{bp-19019} boards/xtensa/espressif:
Fix crypto has | esp32-wrover-kit
:gpio | Killing pytest after timeout... |
2026-06-10
11:13:15 | 19085:
{bp-19019} boards/xtensa/espressif:
Fix crypto has | esp32s3-devkit
:toywasm | (Same) |
2026-06-10
11:00:10 | 19104:
{bp-19065} !sensors/bme680:
allow sensor configura | sim
:lua | S p e e d |
2026-06-10
10:52:35 | 19079:
{bp-19010} boards/risc-v/espressif:
Fix crypto has | esp32p4-function-ev-board
:ulp | Killing pytest after timeout... |
2026-06-10
10:48:44 | 19103:
{bp-19051} drivers/contactless/pn532:
Fix potentia | sim
:lua | D l o aDdl o Uapdl o Upload Total Spent Left Speed
- - |
2026-06-10
10:45:58 | 19102:
{bp-19048} boards/sim/sim/sim/nsh:
enable CONFIG_R | sim
:lua | age Ti % Total % Received % Xferd Average Speed Time Time Time Current
L e fTti
m e S 0p eCeu dr
S
p ee d0 Ti m e 0 T im e 0 T i m e 0 C ur r e0n t |
2026-06-10
10:45:42 | 19101:
{bp-19047} video/fb:
Trigger updatearea() if CONFI | sim
:lua | d %
X f e0r d A v e0r a g e 0S p e e d 0 T i m0e T0i m e 0 T i m e 0C u-r-r:e-n-t: |
2026-06-10
10:37:55 | 19099:
{bp-19045} arch/nrf91:
fix broken modem initializa | stm32f103-minimum
:adb | Spe
e d |
2026-06-10
10:16:08 | 19095:
{bp-19038} drivers/mmcsd/mmcsd_sdio.c:
guard SDIO_ | sim
:lua | e C u r r e n t
D l o a d U p lDolaoadd U Tpoltoaald STpoetnatl SLpeefntt S p eLeedf
t Sp
e e d0 |
2026-06-10
10:11:23 | 19085:
{bp-19019} boards/xtensa/espressif:
Fix crypto has | esp32-devkitc
:crypto | ##[error]hash.c:264:28: error: 'sha224_huge_block_result' defined but not used [-Werror=unused-const-variable=]
264 | static const unsigned char sha224_huge_block_result[28] =
| ^~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[2]: *** [/github/workspace/sources/apps/Application.mk:330: hash.c.github.workspace.sources.apps.testing.drivers.crypto.o] Error 1
make[2]: Target 'all' not remade because of errors.
make[1]: *** [Makefile:54: /github |
2026-06-10
10:10:38 | 19094:
{bp-19037} arch/sim:
Add dependencies for Rust car | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvveeerrraaagggeee SSSpppeeeeeeddd TTTiiimmmeee TTTiiimmmeee TTTiiimmmeee CCCuuurrrrrreeennnttt
DDDllloooaaaddd UUUpppllloooaaaddd TTToootttaalal l S SpSeppneetnn tt L eLLfeetff tt S pSSeppeeedee
dd |
2026-06-10
10:07:47 | 19092:
{bp-19031} drivers/segger:
Download systemview fro | sim
:lua | rent
ed Time Time Time Current |
2026-06-10
10:07:08 | 19093:
{bp-19032} arch/sim:
walk frame-pointer chain for | sim
:lua | % T o%%t aTTloo tt a al l % R e c%%e iRvReeecdce ei%iv evXdef de% r %dX fX feerrddA v eAArvvaeegrreaa ggSeep eSSeppdee ee dd T i mTTeii mm ee T i mTTeii mm ee T i mTTeii mm eC u rCruernrte
n t
D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnetn t LLeefftt SSppeeeedd |
2026-06-10
09:52:18 | 19089:
{bp-19023} boards/arm/stm32/nucleo:
Fix BBSRAM com | sabre-6quad
:netnsh_wb | 0k |
2026-06-10
09:50:48 | 19090:
{bp-19025} workflows/build.yml:
Fix Skipping sim\w | sim
:lua | 0 % T o0t a l 0 % R e0c e iv e d0 % X f e0r d Average Spe 0 ed Time Tim e 0 Time Current |
2026-06-10
09:34:41 | 19089:
{bp-19023} boards/arm/stm32/nucleo:
Fix BBSRAM com | sim
:lua | % t Ra el c e i v e% d R %e c Xe fi ev red d %A v %Xe fr Tea org tde a l S Ap v eDr l%aog eaR edSc pe eiUevpdel do a %dT iX mf eeT ro dt a lTA iv me erS ap ge en t S Tp ie me de L e CfTutir mr eeS np te
e dT
i m e
0T i m e 0 C u r r e 0n t
- : -
S-p e n0 t 0 L0e f t 0S p e e d |
2026-06-10
09:28:48 | 19081:
{bp-19014} driver/serial:
Fix/uart tcdrain bugs | esp32-lyrat
:audio | :--:-- 0 |
2026-06-10
09:27:16 | 19086:
{bp-19020} drivers/mmcsd:
Remove eMMC partitions w | sim
:lua | e e d T i m e T i m e T i m e C u r r e n t
D l o a d U p l o a d T o t a l Dload U pSlpoeandt Total Spent Left Speed |
2026-06-10
09:25:09 | 19086:
{bp-19020} drivers/mmcsd:
Remove eMMC partitions w | qemu-armv8a
:rpserver | curl: (6) Could not resolve host: github.com
curl: (6) Could not resolve host: github.com
make[1]: *** [fdt/Make.defs:30: dtc] Error 6
make[1]: *** [libmetal.defs:82: libmetal.zip] Error 6
make[1]: Target 'context' not remade because of errors.
make[1]: Target 'context' not remade because of errors.
make: *** [tools/Unix.mk:471: libs/libc/.context] Error 2
make: *** [tools/Unix.mk:471: openamp/.context] Error 2
make: Target 'all' not remade because of errors.
On branch releases/13 |
2026-06-10
09:19:00 | 19079:
{bp-19010} boards/risc-v/espressif:
Fix crypto has | rv-virt
:nsbi | /github/workspace/sources/apps/bin/stSJygjY: section .fini_array lma 0xc0101261 adjusted to 0xc0101264 |
2026-06-10
09:16:12 | 19072:
thingy91:
initial sensors support | thingy91
:nsh_nrf52 | Ignored files:
(use "git add -f ..." to include in what will be committed)
drivers/segger/segger.su
drivers/segger/serial_rtt.su
drivers/segger/syslog_rtt.su
Ignored files:
(use "git add -f ..." to include in what will be committed)
system/uorb/sensor/accel.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/angle.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor/baro.c.github.workspace.sources.apps.system.uorb.su
system/uorb/sensor |
2026-06-10
09:11:17 | 19084:
{bp-19018} drivers/mtd:
Remove bad block managemen | sim
:lua | g e T iS mp ee e d T Ti im me e C u r Tr ie mn et
T i m e DC lu or ar de n t U
p l o a d T o t a l DS lp oe an dt U p lL oe fa td S Tp oeDteladol
a d
S Up pe0ln ot a d 0 L T eo ft ta0 l S p eS ep0de
n t |
2026-06-10
09:07:18 | 19083:
{bp-19016} libs/libc/dirent:
preserve errno on rea | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXffeerrdd A vAevreargaeg eS pSepeede d TXi fmTeeir md e AT vi emrTeai gm ee S pT ei em deT i m CeTu ir mrCeeu nr tr
e nT ti
m e T i m e C u r r e n t D lo a d
D lU op al do a d U p l oT ao dt a l T o tS ap le n t S p e n Lt e f t LDSelpfoetae dd
S pUepel
do
a d0
T 0o t0 a l 0 0 00 0 0 S p e |
2026-06-10
09:05:10 | 19080:
{bp-19013} arch/arm/src/stm32hx/stm32_adc:
Reset c | stm32f103-minimum
:adb | d |
2026-06-10
09:05:02 | 19081:
{bp-19014} driver/serial:
Fix/uart tcdrain bugs | sim
:lua | l % |
2026-06-10
08:34:13 | 19078:
{bp-19000} arch/sim:
Fix OOB read/write in usrsock | sim
:lua | -:-- |
2026-06-10
06:57:25 | 19072:
thingy91:
initial sensors support | thingy91
:thingy91_rtt | src/Make.defs:45: *** invalid syntax in conditional. Stop.
make[1]: *** [Makefile:81: context] Error 2
make: *** [tools/Unix.mk:471: boards/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-06-10
01:51:53 | 19070:
drivers/contactless/pn532:
Fix issue leftover from | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-10
01:40:50 | 19070:
drivers/contactless/pn532:
Fix issue leftover from | esp32p4-function-ev-board
:gpio | (Same) |
2026-06-09
23:35:48 | 19070:
drivers/contactless/pn532:
Fix issue leftover from | sim
:lua | To % Tottaall %% RReecceeiivveedd %% XXffeerrdd AAvveerraaggee SSppeeede d Time Time Time Current
Time Time Time Current |
2026-06-09
23:04:44 | 3535:
benchmarks/mtd:
use uniform output style for numbe | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-09
21:07:25 | 19070:
drivers/contactless/pn532:
Fix issue leftover from | esp32s3-devkit
:oneshot | (Same) |
2026-06-09
20:57:20 | 19070:
drivers/contactless/pn532:
Fix issue leftover from | esp32p4-function-ev-board
:pm | (Same) |
2026-06-09
18:53:35 | 19070:
drivers/contactless/pn532:
Fix issue leftover from | sim
:lua | C u r r e n t
D l o a d U p l o a d T o t a l DSlpoeandt U p lLoeaft Speed
0 d 0 T o0t al 0S p e n t0 L e0f t S p0e e d |
2026-06-09
18:15:48 | 19070:
drivers/contactless/pn532:
Fix issue leftover from | sim
:lua | ime
0 T i m e 0 C u r0r e n t |
2026-06-09
18:15:01 | 19070:
drivers/contactless/pn532:
Fix issue leftover from | esp32c3-devkit
:mcuboot_update_agent | e c e iDvleoda d% XUfpelroda d A v eTroatgael S p eSepde n t T i m eL e f t T iSmpee e d
Tim
e 0C u r r e n0t |
2026-06-09
17:29:33 | 19069:
!arch/stm32:
rename STM32F7/H7 QUADSPI Kconfig sym | linum-stm32h753bi
:littlefs | 61d60
< CONFIG_STM32H7_QSPI_INTERRUPTS=y
62a62
> CONFIG_STM32H7_QSPI_INTERRUPTS=y
Saving the new configuration file |
2026-06-09
17:23:56 | 19069:
!arch/stm32:
rename STM32F7/H7 QUADSPI Kconfig sym | linum-stm32h753bi
:nxffs | 55d54
< CONFIG_STM32H7_QSPI_INTERRUPTS=y
56a56
> CONFIG_STM32H7_QSPI_INTERRUPTS=y
Saving the new configuration file |
2026-06-09
17:15:31 | 19069:
!arch/stm32:
rename STM32F7/H7 QUADSPI Kconfig sym | stm32f777zit6-meadow
:f7corecomp | 68d67
< CONFIG_STM32F7_QSPI_POLLING=y
69a69
> CONFIG_STM32F7_QSPI_POLLING=y
Saving the new configuration file |
2026-06-09
17:06:15 | 19069:
!arch/stm32:
rename STM32F7/H7 QUADSPI Kconfig sym | stm32f777zit6-meadow
:i2s | 96d95
< CONFIG_STM32F7_QSPI_POLLING=y
97a97
> CONFIG_STM32F7_QSPI_POLLING=y
Saving the new configuration file |
2026-06-09
16:13:44 | 19072:
thingy91:
initial sensors support | thingy91
:thingy91_rtt | src/Make.defs:45: *** invalid syntax in conditional. Stop.
make[1]: *** [Makefile:81: context] Error 2
make: *** [tools/Unix.mk:471: boards/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-06-09
16:11:26 | 19069:
!arch/stm32:
rename STM32F7/H7 QUADSPI Kconfig sym | stm32f103-minimum
:adb | DDllooaadd U pUlpolado a d T o tTaolt a l S p eSnpte n t L e fLte f tS p eSepde
ed |
2026-06-09
15:31:18 | 19072:
thingy91:
initial sensors support | stm32f103-minimum
:adb | Sp
e e d0 T im e0 T im0e T0i m e 0C u r r e n0t |
2026-06-09
15:09:45 | 19072:
thingy91:
initial sensors support | stm32f103-minimum
:adb | D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnetn t L eLfetf t S pSepeede
d |
2026-06-09
15:05:35 | 19071:
sensors/bme680_uorb.c:
always allow temperature to | sim
:rtptools | ##[error]The runner has received a shutdown signal. This can happen when the runner service is stopped, or a manually started runner is canceled. |
2026-06-09
14:59:26 | 19071:
sensors/bme680_uorb.c:
always allow temperature to | esp32-lyrat
:wifi | % To
Time Current |
2026-06-09
14:38:00 | 3534:
docs/system/ip6tables:
add ip6tables man page | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-09
14:36:12 | 19071:
sensors/bme680_uorb.c:
always allow temperature to | sim
:lua | d T o t a l S p e n t L e f t S p e e d
Dloa
d 0U p l o a d Total Spent Left Spe0e d |
2026-06-09
14:24:27 | 3534:
docs/system/ip6tables:
add ip6tables man page | esp32p4-function-ev-board
:gpio | Killing pytest after timeout... |
2026-06-09
14:16:43 | 19068:
sched/Kconfig:
Fix ETC_ROMFS dependency | esp32s3-devkit
:fastboot | (Same) |
2026-06-09
14:03:59 | 19070:
drivers/contactless/pn532:
Fix issue leftover from | sim
:lua | e Curre
nt |
2026-06-09
13:43:51 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f103-minimum
:sensors | ##[error]common/stm32/stm32_tim.c:674:13: error: 'stm32_tim_gpioconfig' defined but not used [-Werror=unused-function]
674 | static void stm32_tim_gpioconfig(uint32_t cfg, stm32_tim_channel_t mode)
| ^~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[1]: *** [Makefile:179: stm32_tim.o] Error 1
make[1]: Target 'libarch.a' not remade because of errors.
make: *** [tools/LibTargets.mk:170: arch/arm/src/libarch.a] Error 2
make: Target 'all' not remade because of |
2026-06-09
13:43:04 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f103-minimum
:adb | D loDaldo a dU p lUopadl o a dTot a l T oStpaeln t S p eLnetft S pLeeefdt
Sp
e e d0 |
2026-06-09
13:38:15 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | flipperzero
:nsh | In file included from /github/workspace/sources/nuttx/arch/arm/src/chip/chip.h:39,
from /github/workspace/sources/nuttx/arch/arm/src/common/stm32/stm32_tim.h:32,
from board/stm32_boot.c:43:
##[error]/github/workspace/sources/nuttx/arch/arm/src/chip/hardware/stm32wb_pinmap.h:38:4: error: #error "Unsupported STM32WB Pin map"
38 | # error "Unsupported STM32WB Pin map"
| ^~~~~
ERROR: arm-none-eabi-gcc failed: 1
command: arm-none-eabi-gcc -MT ./stm32_boot.o -M '-Wstrict-prototypes' |
2026-06-09
13:38:03 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | b-u585i-iot02a
:nsh | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from /github/workspace/sources/apps/include/sy |
2026-06-09
13:38:02 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | nucleo-l476rg
:nxdemo | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/video/fb.h:34,
from /github/workspace/sources/nuttx/include/nuttx/lcd/lcd.h:32,
from lcd/nxglib_setpixel.c:32:
##[error]/github/workspace/sources/nuttx/include/arch/chip/irq.h:81:4: error: #error "Unsupported STM32 L4 chip"
81 | # error "Uns |
2026-06-09
13:37:02 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | nucleo-l432kc
:spwm | In file included from libminiabi/libxx_delete.cxx:30:
In file included from /github/workspace/sources/nuttx/include/nuttx/lib/lib.h:31:
In file included from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46:
In file included from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33:
In file included from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32:
In file included from /github/workspace/sources/nuttx/include/errno.h:33:
In file included from /github/workspace/ |
2026-06-09
13:34:45 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:qencoder | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from ./alarm_main.c:32:
##[error]/github/wo |
2026-06-09
13:34:33 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:usbnsh | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from /github/workspace/sources/apps/include/sy |
2026-06-09
13:34:22 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:eeprom | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from ./alarm_main.c:32:
##[error]/github/wo |
2026-06-09
13:34:10 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:mfrc522 | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from ./rfid_readuid.c:28:
##[error]/github/ |
2026-06-09
13:33:58 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:tone | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from /github/workspace/sources/apps/include/sy |
2026-06-09
13:33:46 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:nsh | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from ./alarm_main.c:32:
##[error]/github/wo |
2026-06-09
13:33:34 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:modbus_master | (Same) |
2026-06-09
13:33:23 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:sdcard | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from /github/workspace/sources/nuttx/include/n |
2026-06-09
13:33:11 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:usbmsc-sdcard | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from ./alarm_main.c:32:
##[error]/github/wo |
2026-06-09
13:32:58 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:rndis | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from ./dhcpc.c:50:
##[error]/github/workspace/sources/nuttx/include/arch/chip/irq.h:87:4: error: #error "Unsupported STM32 H7 chip"
87 | # error "Unsupported STM32 H7 chip"
| ^~~~~
In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sour |
2026-06-09
13:32:43 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:lvgl | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from ./fb_main.c:34:
##[error]/github/works |
2026-06-09
13:32:31 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:littlefs | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from ./alarm_main.c:32:
##[error]/github/wo |
2026-06-09
13:32:19 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:modbus_slave | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from ./modbus_main.c:49:
##[error]/github/w |
2026-06-09
13:32:07 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:leds | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from /github/workspace/sources/apps/include/sy |
2026-06-09
13:31:55 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:netnsh | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from /github/workspace/sources/nuttx/include/n |
2026-06-09
13:31:43 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:sdram | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from /github/workspace/sources/apps/include/sy |
2026-06-09
13:31:31 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:socketcan | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from ./candump.c:48:
##[error]/github/works |
2026-06-09
13:31:19 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:buzzer | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from ./alarm_main.c:32:
##[error]/github/wo |
2026-06-09
13:31:07 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:zmodem | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from /github/workspace/sources/nuttx/include/n |
2026-06-09
13:30:55 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:nxffs | In file included from /github/workspace/sources/nuttx/include/arch/irq.h:50,
from /github/workspace/sources/nuttx/include/nuttx/irq.h:39,
from /github/workspace/sources/nuttx/include/errno.h:33,
from /github/workspace/sources/nuttx/include/nuttx/semaphore.h:32,
from /github/workspace/sources/nuttx/include/nuttx/mutex.h:33,
from /github/workspace/sources/nuttx/include/nuttx/fs/fs.h:46,
from /github/workspace/sources/nuttx/include/stdio.h:36,
from ./alarm_main.c:32:
##[error]/github/wo |
2026-06-09
13:27:03 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm3210e-eval
:pm | ##[error]common/stm32/stm32_tim.c:674:13: error: 'stm32_tim_gpioconfig' defined but not used [-Werror=unused-function]
674 | static void stm32_tim_gpioconfig(uint32_t cfg, stm32_tim_channel_t mode)
| ^~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[1]: *** [Makefile:179: stm32_tim.o] Error 1
make[1]: Target 'libarch.a' not remade because of errors.
make: *** [tools/LibTargets.mk:170: arch/arm/src/libarch.a] Error 2
make: Target 'all' not remade because of |
2026-06-09
13:26:47 | 19069:
!arch/stm32:
rename STM32F7/H7 QUADSPI Kconfig sym | linum-stm32h753bi
:littlefs | 61d60
< CONFIG_STM32H7_QSPI_INTERRUPTS=y
62a62
> CONFIG_STM32H7_QSPI_INTERRUPTS=y
Saving the new configuration file |
2026-06-09
13:22:14 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | nucleo-f446re
:jumbo | ##[error]common/stm32/stm32_pulsecount.c:1246:12: error: 'pulsecount_interrupt' defined but not used [-Werror=unused-function]
1246 | static int pulsecount_interrupt(struct pulsecount_lowerhalf_s *dev)
| ^~~~~~~~~~~~~~~~~~~~
##[error]common/stm32/stm32_pulsecount.c:313:38: error: 'g_pulsecountops' defined but not used [-Werror=unused-const-variable=]
313 | static const struct pulsecount_ops_s g_pulsecountops =
| ^~~~~~~~~~~~~~~
cc1: all warni |
2026-06-09
13:21:18 | 19069:
!arch/stm32:
rename STM32F7/H7 QUADSPI Kconfig sym | linum-stm32h753bi
:nxffs | 55d54
< CONFIG_STM32H7_QSPI_INTERRUPTS=y
56a56
> CONFIG_STM32H7_QSPI_INTERRUPTS=y
Saving the new configuration file |
2026-06-09
13:15:30 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | olimexino-stm32
:nsh | ##[error]common/stm32/stm32_tim.c:674:13: error: unused function 'stm32_tim_gpioconfig' [-Werror,-Wunused-function]
674 | static void stm32_tim_gpioconfig(uint32_t cfg, stm32_tim_channel_t mode)
| ^~~~~~~~~~~~~~~~~~~~
1 error generated.
make[1]: *** [Makefile:179: stm32_tim.o] Error 1
make[1]: Target 'libarch.a' not remade because of errors.
make: *** [tools/LibTargets.mk:170: arch/arm/src/libarch.a] Error 2
make: Target 'all' not remade because of errors. |
2026-06-09
13:14:47 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | olimexino-stm32
:smallnsh | (Same) |
2026-06-09
13:14:04 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | olimexino-stm32
:tiny | (Same) |
2026-06-09
13:13:19 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | olimexino-stm32
:composite | (Same) |
2026-06-09
13:12:53 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | olimexino-stm32
:can | (Same) |
2026-06-09
13:12:48 | 19069:
!arch/stm32:
rename STM32F7/H7 QUADSPI Kconfig sym | stm32f777zit6-meadow
:f7corecomp | 68d67
< CONFIG_STM32F7_QSPI_POLLING=y
69a69
> CONFIG_STM32F7_QSPI_POLLING=y
Saving the new configuration file |
2026-06-09
13:04:26 | 19069:
!arch/stm32:
rename STM32F7/H7 QUADSPI Kconfig sym | stm32f777zit6-meadow
:i2s | 96d95
< CONFIG_STM32F7_QSPI_POLLING=y
97a97
> CONFIG_STM32F7_QSPI_POLLING=y
Saving the new configuration file |
2026-06-09
12:55:02 | 19067:
!arm/stm32:
split legacy STM32 family selectors | nucleo-f446re
:jumbo | 19a20
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
12:21:35 | 3534:
docs/system/ip6tables:
add ip6tables man page | sim
:lua | m e T i m e T i m e C u r r e n t |
2026-06-09
11:58:36 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | sim
:lua | T i m e T i m e T i m e C u rr e n t
D l o a d U p l o a d T o t a lD l o aSpde n tU p l o aLde f t T oStpaeeld
Sp
e n t0 L e0f t S0p e e d |
2026-06-09
11:42:34 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f429i-disco
:fb | 16c16
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:42:29 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3240g-eval
:webserver | 17c17
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
18a19
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:42:24 | 19067:
!arm/stm32:
split legacy STM32 family selectors | olimex-stm32-e407
:telnetd | 14c14
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
15a16
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:42:06 | 19067:
!arm/stm32:
split legacy STM32 family selectors | viewtool-stm32f107
:nsh | 14c14
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
15a16
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:41:34 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3240g-eval
:nsh | 15c15
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
16a17
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:41:25 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f429i-disco
:nxwm | 19c19
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
20a21
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:41:23 | 19067:
!arm/stm32:
split legacy STM32 family selectors | viewtool-stm32f107
:ft80x | 14c14
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
15a16
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:41:21 | 19067:
!arm/stm32:
split legacy STM32 family selectors | olimex-stm32-e407
:mrf24j40-6lowpan | 18c18
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
19a20
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:41:21 | 19067:
!arm/stm32:
split legacy STM32 family selectors | mikroe-stm32f4
:usbnsh | (Same) |
2026-06-09
11:40:44 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f429i-disco
:systemview | (Same) |
2026-06-09
11:40:37 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3240g-eval
:xmlrpc | 14c14
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
15a16
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:40:31 | 19067:
!arm/stm32:
split legacy STM32 family selectors | mikroe-stm32f4
:nsh | 19c19
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
20a21
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:40:22 | 19067:
!arm/stm32:
split legacy STM32 family selectors | viewtool-stm32f107
:netnsh | 14c14
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
15a16
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:39:54 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f429i-disco
:ofloader | 15c15
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
16a17
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:39:47 | 19067:
!arm/stm32:
split legacy STM32 family selectors | nucleo-l152re
:lcd | 14c14
< CONFIG_ARCH_CHIP_STM32L1=y
---
> CONFIG_ARCH_CHIP_STM32=y
15a16
> CONFIG_ARCH_CHIP_STM32L1=y
Saving the new configuration file |
2026-06-09
11:39:40 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32vldiscovery
:nsh | 26c26
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
27a28
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:39:37 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3240g-eval
:nsh2 | 19c19
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
20a21
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:39:35 | 19067:
!arm/stm32:
split legacy STM32 family selectors | mikroe-stm32f4
:nx | 21c21
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
22a23
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:39:00 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32ldiscovery
:chrono | 20c20
< CONFIG_ARCH_CHIP_STM32L1=y
---
> CONFIG_ARCH_CHIP_STM32=y
21a22
> CONFIG_ARCH_CHIP_STM32L1=y
Saving the new configuration file |
2026-06-09
11:38:40 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3240g-eval
:discover | 13c13
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
14a15
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:38:30 | 19067:
!arm/stm32:
split legacy STM32 family selectors | nucleo-g474re
:lpuartnsh | 15c15
< CONFIG_ARCH_CHIP_STM32G4=y
---
> CONFIG_ARCH_CHIP_STM32=y
16a17
> CONFIG_ARCH_CHIP_STM32G4=y
Saving the new configuration file |
2026-06-09
11:38:21 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32ldiscovery
:nsh | 18c18
< CONFIG_ARCH_CHIP_STM32L1=y
---
> CONFIG_ARCH_CHIP_STM32=y
19a20
> CONFIG_ARCH_CHIP_STM32L1=y
Saving the new configuration file |
2026-06-09
11:38:18 | 19067:
!arm/stm32:
split legacy STM32 family selectors | mikroe-stm32f4
:kostest | 17c17
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
18a19
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:37:50 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3240g-eval
:telnetd | 13c13
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
14a15
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:37:38 | 19067:
!arm/stm32:
split legacy STM32 family selectors | nucleo-g474re
:usbserial | 15c15
< CONFIG_ARCH_CHIP_STM32G4=y
---
> CONFIG_ARCH_CHIP_STM32=y
16a17
> CONFIG_ARCH_CHIP_STM32G4=y
Saving the new configuration file |
2026-06-09
11:37:30 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:nxscope_cdcacm | 15c15
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
16a17
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:37:25 | 19067:
!arm/stm32:
split legacy STM32 family selectors | mikroe-stm32f4
:nxtext | 21c21
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
22a23
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:37:00 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f429i-disco
:bootlogo | 16c16
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:36:40 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:rgbled | (Same) |
2026-06-09
11:36:37 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3220g-eval
:nxwm | 21c21
< CONFIG_ARCH_CHIP_STM32F2=y
---
> CONFIG_ARCH_CHIP_STM32=y
22a23
> CONFIG_ARCH_CHIP_STM32F2=y
Saving the new configuration file |
2026-06-09
11:36:19 | 19067:
!arm/stm32:
split legacy STM32 family selectors | mikroe-stm32f4
:fulldemo | 23c23
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
24a25
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:35:48 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3220g-eval
:dhcpd | 13c13
< CONFIG_ARCH_CHIP_STM32F2=y
---
> CONFIG_ARCH_CHIP_STM32=y
14a15
> CONFIG_ARCH_CHIP_STM32F2=y
Saving the new configuration file |
2026-06-09
11:35:29 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:wifi | 19c19
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
20a21
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:35:28 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f429i-disco
:lvgl | 17c17
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
18a19
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:35:22 | 19067:
!arm/stm32:
split legacy STM32 family selectors | mikroe-stm32f4
:nxlines | 23c23
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
24a25
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:34:59 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3220g-eval
:nettest | 12c12
< CONFIG_ARCH_CHIP_STM32F2=y
---
> CONFIG_ARCH_CHIP_STM32=y
13a14
> CONFIG_ARCH_CHIP_STM32F2=y
Saving the new configuration file |
2026-06-09
11:34:48 | 19067:
!arm/stm32:
split legacy STM32 family selectors | maple
:usbnsh | 28c28
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
29a30
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:34:46 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:mmcsdspi | 20c20
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
21a22
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:34:17 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3220g-eval
:nsh | 16c16
< CONFIG_ARCH_CHIP_STM32F2=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32F2=y
Saving the new configuration file |
2026-06-09
11:34:14 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f429i-disco
:nxhello | 18c18
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
19a20
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:34:09 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:lwl | 17c17
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
18a19
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:34:08 | 19067:
!arm/stm32:
split legacy STM32 family selectors | maple
:nsh | 27c27
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
28a29
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:33:31 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:mt6816 | 18c18
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
19a20
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:33:25 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f429i-disco
:gdbstub | 16c16
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:33:18 | 19067:
!arm/stm32:
split legacy STM32 family selectors | maple
:nx | 29c29
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
30a31
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:33:18 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3220g-eval
:nsh2 | 18c18
< CONFIG_ARCH_CHIP_STM32F2=y
---
> CONFIG_ARCH_CHIP_STM32=y
19a20
> CONFIG_ARCH_CHIP_STM32F2=y
Saving the new configuration file |
2026-06-09
11:32:54 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:max31855 | 17c17
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
18a19
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:32:40 | 19067:
!arm/stm32:
split legacy STM32 family selectors | hymini-stm32v
:usbnsh | 15c15
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
16a17
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:32:27 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f429i-disco
:lcd | 17c17
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
18a19
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:32:27 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3220g-eval
:telnetd | 12c12
< CONFIG_ARCH_CHIP_STM32F2=y
---
> CONFIG_ARCH_CHIP_STM32=y
13a14
> CONFIG_ARCH_CHIP_STM32F2=y
Saving the new configuration file |
2026-06-09
11:32:07 | 19067:
!arm/stm32:
split legacy STM32 family selectors | nucleo-g431rb
:can | 18c18
< CONFIG_ARCH_CHIP_STM32G4=y
---
> CONFIG_ARCH_CHIP_STM32=y
19a20
> CONFIG_ARCH_CHIP_STM32G4=y
Saving the new configuration file |
2026-06-09
11:32:01 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:usbnsh | 15c15
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
16a17
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:31:52 | 19067:
!arm/stm32:
split legacy STM32 family selectors | hymini-stm32v
:nsh | 15c15
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
16a17
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:31:30 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3210e-eval
:nxterm | 19c19
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
20a21
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:31:25 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:lcd1602 | 17c17
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
18a19
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:31:05 | 19067:
!arm/stm32:
split legacy STM32 family selectors | hymini-stm32v
:nsh2 | 20c20
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
21a22
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:30:58 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f429i-disco
:stack | 15c15
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
16a17
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:30:47 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3210e-eval
:nsh | 16c16
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:30:25 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:adb | 19c19
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
20a21
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:30:16 | 19067:
!arm/stm32:
split legacy STM32 family selectors | hymini-stm32v
:usbmsc | 14c14
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
15a16
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:30:00 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f411-minimum
:rgbled | 19c19
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
20a21
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:29:56 | 19067:
!arm/stm32:
split legacy STM32 family selectors | nucleo-f446re
:jumbo | 19a20
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:29:53 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3210e-eval
:nx | 19c19
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
20a21
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:29:38 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:posix_spawn | 13c13
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
14a15
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:29:29 | 19067:
!arm/stm32:
split legacy STM32 family selectors | hymini-stm32v
:usbserial | 12c12
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
13a14
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:29:12 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f411-minimum
:pwm | 19c19
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
20a21
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:29:05 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3210e-eval
:pm | 24c24
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
25a26
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:28:49 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:sporadic | 16c16
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:28:45 | 19067:
!arm/stm32:
split legacy STM32 family selectors | fire-stm32v2
:nsh | 17c17
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
18a19
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:28:15 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:xen1210 | 17c17
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
18a19
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:28:07 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3210e-eval
:nsh2 | 25c25
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
26a27
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:28:04 | 19067:
!arm/stm32:
split legacy STM32 family selectors | et-stm32-stamp
:nsh | 12c12
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
13a14
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:27:38 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:module | 16c16
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:27:18 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3210e-eval
:usbmsc | 14c14
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
15a16
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:27:01 | 19067:
!arm/stm32:
split legacy STM32 family selectors | emw3162
:wlan | 17c17
< CONFIG_ARCH_CHIP_STM32F2=y
---
> CONFIG_ARCH_CHIP_STM32=y
18a19
> CONFIG_ARCH_CHIP_STM32F2=y
Saving the new configuration file |
2026-06-09
11:26:30 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3210e-eval
:usbserial | 12c12
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
13a14
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:26:24 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:testlibcxx | 13c13
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
14a15
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:26:13 | 19067:
!arm/stm32:
split legacy STM32 family selectors | emw3162
:nsh | 14c14
< CONFIG_ARCH_CHIP_STM32F2=y
---
> CONFIG_ARCH_CHIP_STM32=y
15a16
> CONFIG_ARCH_CHIP_STM32F2=y
Saving the new configuration file |
2026-06-09
11:25:48 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:nsh | 16c16
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:25:40 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm3210e-eval
:composite | 14c14
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
15a16
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:25:13 | 19067:
!arm/stm32:
split legacy STM32 family selectors | cloudctrl
:nsh | 15c15
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
16a17
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:25:12 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:st7567 | 16c16
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:24:35 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:canard | (Same) |
2026-06-09
11:24:34 | 19067:
!arm/stm32:
split legacy STM32 family selectors | clicker2-stm32
:usbnsh | 14c14
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
15a16
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:24:27 | 19067:
!arm/stm32:
split legacy STM32 family selectors | shenzhou
:nxwm | 23c23
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
24a25
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:24:25 | 19067:
!arm/stm32:
split legacy STM32 family selectors | nucleo-f446re
:lcd | 19c19
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
20a21
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:23:52 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:ipv6 | (Same) |
2026-06-09
11:23:51 | 19067:
!arm/stm32:
split legacy STM32 family selectors | clicker2-stm32
:mrf24j40-starhub | 16c16
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:23:38 | 19067:
!arm/stm32:
split legacy STM32 family selectors | nucleo-f446re
:can | 19c19
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
20a21
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:23:28 | 19067:
!arm/stm32:
split legacy STM32 family selectors | shenzhou
:nsh | 15c15
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
16a17
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:23:10 | 19067:
!arm/stm32:
split legacy STM32 family selectors | clicker2-stm32
:mrf24j40-mac | 13c13
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
14a15
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:23:05 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:pm | 15c15
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
16a17
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:22:53 | 19067:
!arm/stm32:
split legacy STM32 family selectors | photon
:rgbled | 16c16
< CONFIG_ARCH_CHIP_STM32F2=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32F2=y
Saving the new configuration file |
2026-06-09
11:22:40 | 19067:
!arm/stm32:
split legacy STM32 family selectors | nucleo-f429zi
:trace | 15c15
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
16a17
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:22:31 | 19067:
!arm/stm32:
split legacy STM32 family selectors | clicker2-stm32
:nsh | 13c13
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
14a15
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:22:19 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:cxx-oot-build | 17c17
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
18a19
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:22:16 | 19067:
!arm/stm32:
split legacy STM32 family selectors | photon
:usbnsh | 15c15
< CONFIG_ARCH_CHIP_STM32F2=y
---
> CONFIG_ARCH_CHIP_STM32=y
16a17
> CONFIG_ARCH_CHIP_STM32F2=y
Saving the new configuration file |
2026-06-09
11:21:47 | 19067:
!arm/stm32:
split legacy STM32 family selectors | clicker2-stm32
:mrf24j40-starpoint | 16c16
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:21:36 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:rndis | 17c17
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
18a19
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:21:21 | 19067:
!arm/stm32:
split legacy STM32 family selectors | photon
:adb | 22c22
< CONFIG_ARCH_CHIP_STM32F2=y
---
> CONFIG_ARCH_CHIP_STM32=y
23a24
> CONFIG_ARCH_CHIP_STM32F2=y
Saving the new configuration file |
2026-06-09
11:21:12 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f103-minimum
:sensors | 22c22
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
23a24
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:21:01 | 19067:
!arm/stm32:
split legacy STM32 family selectors | clicker2-stm32
:xbee-6lowpan | 16c16
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:20:49 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:mpr121_keypad | 17c17
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
18a19
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:20:20 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f103-minimum
:adb | DDllooaadd UUppllooaadd TTotoatlal SSppeennt t L ef tL Sepfete d
Spee
d
36c36
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
37a38
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:20:12 | 19067:
!arm/stm32:
split legacy STM32 family selectors | photon
:wlan | 18c18
< CONFIG_ARCH_CHIP_STM32F2=y
---
> CONFIG_ARCH_CHIP_STM32=y
19a20
> CONFIG_ARCH_CHIP_STM32F2=y
Saving the new configuration file |
2026-06-09
11:20:05 | 19067:
!arm/stm32:
split legacy STM32 family selectors | nucleo-f412zg
:coremark | 15c15
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
16a17
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:20:00 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:elf | 13c13
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
14a15
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:19:42 | 19067:
!arm/stm32:
split legacy STM32 family selectors | clicker2-stm32
:knsh | 14c14
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
15a16
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:19:35 | 19067:
!arm/stm32:
split legacy STM32 family selectors | photon
:nsh | 15c15
< CONFIG_ARCH_CHIP_STM32F2=y
---
> CONFIG_ARCH_CHIP_STM32=y
16a17
> CONFIG_ARCH_CHIP_STM32F2=y
Saving the new configuration file |
2026-06-09
11:19:14 | 19067:
!arm/stm32:
split legacy STM32 family selectors | nucleo-f412zg
:ostest | 21c21
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
22a23
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:18:45 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:kostest | 12c12
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
13a14
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:18:35 | 19067:
!arm/stm32:
split legacy STM32 family selectors | clicker2-stm32
:mrf24j40-6lowpan | 16c16
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:18:33 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f103-minimum
:jlx12864g | 24c24
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
25a26
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:18:29 | 19067:
!arm/stm32:
split legacy STM32 family selectors | photon
:wlan-perf | 18c18
< CONFIG_ARCH_CHIP_STM32F2=y
---
> CONFIG_ARCH_CHIP_STM32=y
19a20
> CONFIG_ARCH_CHIP_STM32F2=y
Saving the new configuration file |
2026-06-09
11:17:57 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:pseudoterm | 16c16
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:17:45 | 19067:
!arm/stm32:
split legacy STM32 family selectors | b-g474e-dpow1
:nsh | 15c15
< CONFIG_ARCH_CHIP_STM32G4=y
---
> CONFIG_ARCH_CHIP_STM32=y
16a17
> CONFIG_ARCH_CHIP_STM32G4=y
Saving the new configuration file |
2026-06-09
11:17:36 | 19067:
!arm/stm32:
split legacy STM32 family selectors | omnibusf4
:nsh | 18c18
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
19a20
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:17:18 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:audio | 16c16
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:17:04 | 19067:
!arm/stm32:
split legacy STM32 family selectors | olimexino-stm32
:nsh | 36c36
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
37a38
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:16:57 | 19067:
!arm/stm32:
split legacy STM32 family selectors | b-g474e-dpow1
:buckboost | 16c16
< CONFIG_ARCH_CHIP_STM32G4=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32G4=y
Saving the new configuration file |
2026-06-09
11:16:41 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:modbus_slave | 20c20
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
21a22
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:16:20 | 19067:
!arm/stm32:
split legacy STM32 family selectors | olimexino-stm32
:smallnsh | 17c17
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
18a19
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:16:04 | 19067:
!arm/stm32:
split legacy STM32 family selectors | b-g474e-dpow1
:ostest | 15c15
< CONFIG_ARCH_CHIP_STM32G4=y
---
> CONFIG_ARCH_CHIP_STM32=y
16a17
> CONFIG_ARCH_CHIP_STM32G4=y
Saving the new configuration file |
2026-06-09
11:15:57 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f103-minimum
:ssd1306 | 37c37
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
38a39
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:15:54 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:ether_w5500 | 16c16
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:15:36 | 19067:
!arm/stm32:
split legacy STM32 family selectors | olimexino-stm32
:tiny | 14c14
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
15a16
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:15:12 | 19067:
!arm/stm32:
split legacy STM32 family selectors | b-g431b-esc1
:nsh | 18c18
< CONFIG_ARCH_CHIP_STM32G4=y
---
> CONFIG_ARCH_CHIP_STM32=y
19a20
> CONFIG_ARCH_CHIP_STM32G4=y
Saving the new configuration file |
2026-06-09
11:15:02 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:brickmatch | 18c18
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
19a20
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:14:49 | 19067:
!arm/stm32:
split legacy STM32 family selectors | olimexino-stm32
:composite | 36c36
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
37a38
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:14:48 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f103-minimum
:can | 37c37
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
38a39
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:14:14 | 19067:
!arm/stm32:
split legacy STM32 family selectors | b-g431b-esc1
:cansock | 16c16
< CONFIG_ARCH_CHIP_STM32G4=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32G4=y
Saving the new configuration file |
2026-06-09
11:14:12 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:usbmsc | 14c14
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
15a16
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:13:37 | 19067:
!arm/stm32:
split legacy STM32 family selectors | b-g431b-esc1
:foc_b16 | 18c18
< CONFIG_ARCH_CHIP_STM32G4=y
---
> CONFIG_ARCH_CHIP_STM32=y
19a20
> CONFIG_ARCH_CHIP_STM32G4=y
Saving the new configuration file |
2026-06-09
11:13:24 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:netnsh | 18c18
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
19a20
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:12:46 | 19067:
!arm/stm32:
split legacy STM32 family selectors | b-g431b-esc1
:can | 18c18
< CONFIG_ARCH_CHIP_STM32G4=y
---
> CONFIG_ARCH_CHIP_STM32=y
19a20
> CONFIG_ARCH_CHIP_STM32G4=y
Saving the new configuration file |
2026-06-09
11:12:33 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:max7219 | 48c48
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
49a50
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:11:53 | 19067:
!arm/stm32:
split legacy STM32 family selectors | b-g431b-esc1
:foc_f32 | 18c18
< CONFIG_ARCH_CHIP_STM32G4=y
---
> CONFIG_ARCH_CHIP_STM32=y
19a20
> CONFIG_ARCH_CHIP_STM32G4=y
Saving the new configuration file |
2026-06-09
11:11:50 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:sbutton | 18c18
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
19a20
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:10:43 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:composite | (Same) |
2026-06-09
11:09:46 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:nxlines | 19c19
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
20a21
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:08:49 | 19067:
!arm/stm32:
split legacy STM32 family selectors | olimexino-stm32
:can | 24c24
< CONFIG_ARCH_CHIP_STM32F1=y
---
> CONFIG_ARCH_CHIP_STM32=y
25a26
> CONFIG_ARCH_CHIP_STM32F1=y
Saving the new configuration file |
2026-06-09
11:05:42 | 19067:
!arm/stm32:
split legacy STM32 family selectors | stm32f4discovery
:st7789 | 16c16
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
17a18
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
11:03:42 | 19067:
!arm/stm32:
split legacy STM32 family selectors | axoloti
:nsh | 17c17
< CONFIG_ARCH_CHIP_STM32F4=y
---
> CONFIG_ARCH_CHIP_STM32=y
18a19
> CONFIG_ARCH_CHIP_STM32F4=y
Saving the new configuration file |
2026-06-09
10:53:06 | 19065:
!sensors/bme680:
allow sensor configuration during | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-09
10:41:50 | 19065:
!sensors/bme680:
allow sensor configuration during | esp32p4-function-ev-board
:watchdog | (Same) |
2026-06-09
10:10:58 | 19065:
!sensors/bme680:
allow sensor configuration during | stm32f103-minimum
:adb | t
D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnetn t L eLfetf t S pSepeede
d |
2026-06-09
09:49:09 | 19061:
Assert size optimizations | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-09
09:40:51 | 19061:
Assert size optimizations | esp32p4-function-ev-board
:gpio | (Same) |
2026-06-09
09:15:57 | 19061:
Assert size optimizations | stm32f103-minimum
:adb | DDllooaadd UUppllooad Total Spent Left Speed |
2026-06-09
08:27:53 | 19065:
!sensors/bme680:
allow sensor configuration during | sim
:lua | %%% % TTToTtoooatltt aa ll a l % %R e %cR ee%Ric evRceeedci ee%vii eXvdfve eedrd% d % XXffeerrdd AAvveerraaggee SSppeeeedd TTiimmee TTiimmee TTimiem e CCuurrrreenntt
ed |
2026-06-09
07:31:23 | 19061:
Assert size optimizations | sim
:lua | D lo%a dT o tUapll o a d % RTeocteailv e d S%p eXnfte r d LAevfetr a gSep eSpeede
d Ti
m e 0 T i m0e 0 T i m e 0 C u r r0e n t |
2026-06-09
05:45:29 | 19061:
Assert size optimizations | sim
:lua | S p e e d T i m e T i m e T i m e CDulroraedn t
Le
f t 0 S p e e d0 |
2026-06-09
05:42:39 | 19061:
Assert size optimizations | esp32s2-saola-1
:mcuboot_update_agent | ent Left Speed |
2026-06-09
05:24:51 | 19061:
Assert size optimizations | sim
:lua | Time
0 T i m e 0 C u r r0e nt |
2026-06-08
20:30:36 | 19064:
include/cxx/ctime:
Add localtime to std namespace. | sim
:lua | T i me C u r r en t
D l o ad U p l o ad To t a l D lSpoeandt ULpelfto a dS pe e dT
ota
l 0 S p e0n t 0 L 0e f t 0 S p e0 e d |
2026-06-08
19:50:28 | 3532:
netutils/dropbear:
initial Dropbear SSH server por | esp32s3-devkit
:fastboot | Killing pytest after timeout... |
2026-06-08
19:35:28 | 3532:
netutils/dropbear:
initial Dropbear SSH server por | esp32p4-function-ev-board
:watchdog | (Same) |
2026-06-08
18:42:52 | 3532:
netutils/dropbear:
initial Dropbear SSH server por | stm32f103-minimum
:adb | Rec
ei v e0d % X f e0rd Av e0r ag e S p0e e d 0 0 T i m0e T i0m e- - : - - :T-i-m e- - :C-ur-r:e-n-t |
2026-06-08
17:57:24 | 19061:
Assert size optimizations | pic32mx7mmb
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:296:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
17:57:04 | 19061:
Assert size optimizations | olimex-lpc1766stk
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
17:57:02 | 19061:
Assert size optimizations | esp32c3-devkit
:temperature_sensor | (Same) |
2026-06-08
17:57:02 | 19061:
Assert size optimizations | sabre-6quad
:nsh | (Unknown) |
2026-06-08
17:56:54 | 19061:
Assert size optimizations | pic32mx-starterkit
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:296:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
17:56:53 | 19061:
Assert size optimizations | esp32s2-saola-1
:twai | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
17:56:42 | 19061:
Assert size optimizations | spresense
:coremark | (Same) |
2026-06-08
17:56:36 | 19061:
Assert size optimizations | starpro64
:nsh | (Same) |
2026-06-08
17:56:27 | 19061:
Assert size optimizations | olimex-lpc1766stk
:thttpd-binfs | (Same) |
2026-06-08
17:56:26 | 19061:
Assert size optimizations | esp32-2432S028
:lvgl | (Same) |
2026-06-08
17:56:11 | 19061:
Assert size optimizations | esp32s2-saola-1
:mcuboot_nsh | (Same) |
2026-06-08
17:56:07 | 19061:
Assert size optimizations | pic32mx-starterkit
:nsh2 | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:296:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
17:55:58 | 19061:
Assert size optimizations | esp32c3-devkit
:sta_softap | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
17:55:54 | 19061:
Assert size optimizations | ttgo_eink5_v2
:fb | (Same) |
2026-06-08
17:55:50 | 19061:
Assert size optimizations | spresense
:ostest | (Same) |
2026-06-08
17:55:46 | 19061:
Assert size optimizations | smartl-c906
:module | (Same) |
2026-06-08
17:55:45 | 19061:
Assert size optimizations | olimex-lpc1766stk
:hidmouse | (Same) |
2026-06-08
17:55:35 | 19061:
Assert size optimizations | sabre-6quad
:netknsh | (Same) |
2026-06-08
17:55:35 | 19061:
Assert size optimizations | ubw32
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:296:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
17:55:08 | 19061:
Assert size optimizations | heltec_wifi_lora32
:sx1276 | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
17:55:07 | 19061:
Assert size optimizations | esp32s2-saola-1
:crypto | (Same) |
2026-06-08
17:55:06 | 19061:
Assert size optimizations | smartl-c906
:nsh | (Same) |
2026-06-08
17:55:02 | 19061:
Assert size optimizations | olimex-lpc1766stk
:usbmsc | (Same) |
2026-06-08
17:54:55 | 19061:
Assert size optimizations | spresense
:smp | (Same) |
2026-06-08
17:54:36 | 19061:
Assert size optimizations | heltec_wifi_lora32
:nsh | (Same) |
2026-06-08
17:54:24 | 19061:
Assert size optimizations | esp32s2-saola-1
:sdm | (Same) |
2026-06-08
17:54:20 | 19061:
Assert size optimizations | olimex-lpc1766stk
:usbserial | (Same) |
2026-06-08
17:54:18 | 19061:
Assert size optimizations | smartl-c906
:elf | (Same) |
2026-06-08
17:54:17 | 19061:
Assert size optimizations | sabre-6quad
:libcxx | (Same) |
2026-06-08
17:54:12 | 19061:
Assert size optimizations | csk6011a-nano
:nsh | (Same) |
2026-06-08
17:54:07 | 19061:
Assert size optimizations | esp32c3-devkit
:mcuboot_update_agent | (Same) |
2026-06-08
17:54:03 | 19061:
Assert size optimizations | lilygo_tbeam_lora_gps
:sx127x | (Same) |
2026-06-08
17:53:59 | 19061:
Assert size optimizations | sure-pic32mx
:usbnsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:296:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
17:53:41 | 19061:
Assert size optimizations | esp32s2-saola-1
:temperature_sensor | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
17:53:32 | 19061:
Assert size optimizations | olimex-lpc1766stk
:zmodem | (Same) |
2026-06-08
17:53:30 | 19061:
Assert size optimizations | lilygo_tbeam_lora_gps
:nsh | (Same) |
2026-06-08
17:53:24 | 19061:
Assert size optimizations | c5471evm
:httpd | (Same) |
2026-06-08
17:53:20 | 19061:
Assert size optimizations | sure-pic32mx
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:296:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
17:53:19 | 19061:
Assert size optimizations | esp32c6-xiao
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
17:53:11 | 19061:
Assert size optimizations | sabre-6quad
:netnsh_smp | (Same) |
2026-06-08
17:53:02 | 19061:
Assert size optimizations | esp32c3-devkit
:rtc | (Same) |
2026-06-08
17:53:00 | 19061:
Assert size optimizations | smartl-c906
:knsh | (Same) |
2026-06-08
17:52:58 | 19061:
Assert size optimizations | lilygo_tbeam_lora_gps
:gps | (Same) |
2026-06-08
17:52:52 | 19061:
Assert size optimizations | flipnclick-pic32mz
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:296:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
17:52:42 | 19061:
Assert size optimizations | open1788
:fb | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
17:52:38 | 19061:
Assert size optimizations | c5471evm
:nettest | (Same) |
2026-06-08
17:52:22 | 19061:
Assert size optimizations | sabre-6quad
:elf | (Same) |
2026-06-08
17:52:20 | 19061:
Assert size optimizations | esp32c3-devkit
:efuse | (Same) |
2026-06-08
17:52:18 | 19061:
Assert size optimizations | flipnclick-pic32mz
:nxlines | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:296:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
17:52:08 | 19061:
Assert size optimizations | smartl-c906
:sotest | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
17:52:05 | 19061:
Assert size optimizations | esp32s2-saola-1
:sta_softap | (Same) |
2026-06-08
17:51:58 | 19061:
Assert size optimizations | esp32-ethernet-kit
:wifi | (Same) |
2026-06-08
17:51:51 | 19061:
Assert size optimizations | open1788
:pwfb | (Same) |
2026-06-08
17:51:47 | 19061:
Assert size optimizations | c5471evm
:nsh | (Same) |
2026-06-08
17:51:39 | 19061:
Assert size optimizations | pic32mz-starterkit
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:296:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
17:51:38 | 19061:
Assert size optimizations | esp32c3-devkit
:bmp180 | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
17:51:35 | 19061:
Assert size optimizations | sabre-6quad
:netnsh_wb | (Same) |
2026-06-08
17:51:17 | 19061:
Assert size optimizations | smartl-c906
:fpu | (Same) |
2026-06-08
17:51:16 | 19061:
Assert size optimizations | esp32-ethernet-kit
:ethernet | (Same) |
2026-06-08
17:51:13 | 19061:
Assert size optimizations | open1788
:pdcurses | (Same) |
2026-06-08
17:51:06 | 19061:
Assert size optimizations | at32f437-mini
:systemview | (Same) |
2026-06-08
17:50:59 | 19061:
Assert size optimizations | chipkit-wifire
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:296:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
17:50:57 | 19061:
Assert size optimizations | esp32c3-devkit
:ostest | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
17:50:42 | 19061:
Assert size optimizations | esp32-ethernet-kit
:oneshot | (Same) |
2026-06-08
17:50:33 | 19061:
Assert size optimizations | at32f437-mini
:usbnsh | (Same) |
2026-06-08
17:50:30 | 19061:
Assert size optimizations | ox64
:nsh | (Same) |
2026-06-08
17:50:27 | 19061:
Assert size optimizations | open1788
:nsh | (Same) |
2026-06-08
17:50:26 | 19061:
Assert size optimizations | avr32dev1
:nsh | misc/assert.c: In function 'dump_stacks':
misc/assert.c:296: error: expected ')' before 'g_sp_out_of_range_fmt'
cc1: warnings being treated as errors
At top level:
cc1: error: unrecognized command line option "-Wno-cpp"
make[1]: *** [Makefile:65: assert.o] Error 1
make[1]: Target 'libsched.a' not remade because of errors.
make: *** [tools/LibTargets.mk:71: sched/libsched.a] Error 2
make: Target 'all' not remade because of errors. |
2026-06-08
17:50:22 | 19061:
Assert size optimizations | esp32s2-saola-1
:mcuboot_update_agent | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
17:50:15 | 19061:
Assert size optimizations | esp32c3-devkit
:buttons | (Same) |
2026-06-08
17:50:10 | 19061:
Assert size optimizations | esp32-ethernet-kit
:nsh | (Same) |
2026-06-08
17:50:05 | 19061:
Assert size optimizations | sabre-6quad
:netknsh_smp | (Same) |
2026-06-08
17:49:55 | 19061:
Assert size optimizations | at32f437-mini
:can_socket | (Same) |
2026-06-08
17:49:55 | 19061:
Assert size optimizations | avr32dev1
:ostest | misc/assert.c: In function 'dump_stacks':
misc/assert.c:296: error: expected ')' before 'g_sp_out_of_range_fmt'
cc1: warnings being treated as errors
At top level:
cc1: error: unrecognized command line option "-Wno-cpp"
make[1]: *** [Makefile:65: assert.o] Error 1
make[1]: Target 'libsched.a' not remade because of errors.
make: *** [tools/LibTargets.mk:71: sched/libsched.a] Error 2
make: Target 'all' not remade because of errors. |
2026-06-08
17:49:46 | 19061:
Assert size optimizations | esp32-c3-zero
:jumbo | (Unknown) |
2026-06-08
17:49:44 | 19061:
Assert size optimizations | ox64
:timer | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
17:49:35 | 19061:
Assert size optimizations | mizar32a
:nsh | misc/assert.c: In function 'dump_stacks':
misc/assert.c:296: error: expected ')' before 'g_sp_out_of_range_fmt'
cc1: warnings being treated as errors
At top level:
cc1: error: unrecognized command line option "-Wno-cpp"
make[1]: *** [Makefile:65: assert.o] Error 1
make[1]: Target 'libsched.a' not remade because of errors.
make: *** [tools/LibTargets.mk:71: sched/libsched.a] Error 2
make: Target 'all' not remade because of errors. |
2026-06-08
17:49:22 | 19061:
Assert size optimizations | at32f437-mini
:pwm | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
17:49:19 | 19061:
Assert size optimizations | esp32s2-saola-1
:rtc | (Same) |
2026-06-08
17:49:02 | 19061:
Assert size optimizations | open1788
:knxterm | (Same) |
2026-06-08
17:48:58 | 19061:
Assert size optimizations | ox64
:spi | (Same) |
2026-06-08
17:48:56 | 19061:
Assert size optimizations | esp32-ethernet-kit
:autopm | (Same) |
2026-06-08
17:48:55 | 19061:
Assert size optimizations | esp32-c3-zero
:wifi | (Unknown) |
2026-06-08
17:48:53 | 19061:
Assert size optimizations | sabre-6quad
:netnsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
17:48:47 | 19061:
Assert size optimizations | at32f437-mini
:msc | (Same) |
2026-06-08
17:48:32 | 19061:
Assert size optimizations | esp32s2-saola-1
:efuse | (Same) |
2026-06-08
17:48:15 | 19061:
Assert size optimizations | at32f437-mini
:nsh | (Same) |
2026-06-08
17:48:08 | 19061:
Assert size optimizations | esp32-ethernet-kit
:rtc | (Same) |
2026-06-08
17:48:05 | 19061:
Assert size optimizations | esp32-c3-zero
:usbnsh | (Unknown) |
2026-06-08
17:47:49 | 19061:
Assert size optimizations | open1788
:knsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
17:47:44 | 19061:
Assert size optimizations | sim
:lua | nt |
2026-06-08
17:47:37 | 19061:
Assert size optimizations | sabre-6quad
:knsh_smp | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
17:47:34 | 19061:
Assert size optimizations | esp32-ethernet-kit
:buttons | (Same) |
2026-06-08
17:47:33 | 19061:
Assert size optimizations | ox64
:adc | (Same) |
2026-06-08
17:47:26 | 19061:
Assert size optimizations | at32f437-mini
:sdcard | (Same) |
2026-06-08
17:46:59 | 19061:
Assert size optimizations | esp32-pico-kit
:nsh | (Same) |
2026-06-08
17:46:55 | 19061:
Assert size optimizations | open1788
:nxlines | (Same) |
2026-06-08
17:46:55 | 19061:
Assert size optimizations | esp32-c3-zero
:nsh | (Same) |
2026-06-08
17:46:54 | 19061:
Assert size optimizations | at32f437-mini
:adc | (Same) |
2026-06-08
17:46:37 | 19061:
Assert size optimizations | esp32s2-saola-1
:ostest | (Same) |
2026-06-08
17:46:24 | 19061:
Assert size optimizations | ttgo_lora_esp32
:sx127x | (Same) |
2026-06-08
17:46:22 | 19061:
Assert size optimizations | esp32-c3-zero
:sta_softap | (Unknown) |
2026-06-08
17:46:20 | 19061:
Assert size optimizations | sabre-6quad
:knsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
17:46:13 | 19061:
Assert size optimizations | at32f437-mini
:eth | (Same) |
2026-06-08
17:46:06 | 19061:
Assert size optimizations | zkit-arm-1769
:nsh | (Same) |
2026-06-08
17:45:50 | 19061:
Assert size optimizations | ttgo_lora_esp32
:nsh | (Same) |
2026-06-08
17:45:47 | 19061:
Assert size optimizations | esp32s2-saola-1
:buttons | (Same) |
2026-06-08
17:45:39 | 19061:
Assert size optimizations | at32f437-mini
:can_char | (Same) |
2026-06-08
17:45:17 | 19061:
Assert size optimizations | zkit-arm-1769
:hello | (Same) |
2026-06-08
17:45:15 | 19061:
Assert size optimizations | sabre-6quad
:netnsh_ar8031 | (Same) |
2026-06-08
17:45:15 | 19061:
Assert size optimizations | esp32s2-saola-1
:sotest | (Same) |
2026-06-08
17:45:14 | 19061:
Assert size optimizations | ttgo_t_display_esp32
:nsh | (Same) |
2026-06-08
17:44:53 | 19061:
Assert size optimizations | at32f437-mini
:usbserial | (Same) |
2026-06-08
17:44:40 | 19061:
Assert size optimizations | sabre-6quad
:smp | (Unknown) |
2026-06-08
17:44:33 | 19061:
Assert size optimizations | qemu-armv8a
:nsh_smp | In file included from D:/a/nuttx/nuttx/sources/nuttx/include/nuttx/notifier.h:35,
from D:/a/nuttx/nuttx/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^ |
2026-06-08
17:44:15 | 19061:
Assert size optimizations | zkit-arm-1769
:nxhello | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
17:44:11 | 19061:
Assert size optimizations | sabre-6quad
:citest | (Same) |
2026-06-08
17:44:09 | 19061:
Assert size optimizations | ttgo_t_display_esp32
:lvgl_fb | (Same) |
2026-06-08
17:44:07 | 19061:
Assert size optimizations | at32f437-mini
:rtc | (Same) |
2026-06-08
17:43:36 | 19061:
Assert size optimizations | ttgo_t_display_esp32
:lvgl_lcd | (Same) |
2026-06-08
17:43:18 | 19061:
Assert size optimizations | t3-gem-o1
:nsh | (Same) |
2026-06-08
17:43:16 | 19061:
Assert size optimizations | bl602evb
:dma | (Same) |
2026-06-08
17:43:15 | 19061:
Assert size optimizations | u-blox-c027
:nsh | (Same) |
2026-06-08
17:42:46 | 19061:
Assert size optimizations | beaglebone-black
:nsh | (Same) |
2026-06-08
17:42:38 | 19061:
Assert size optimizations | lincoln60
:nsh | (Same) |
2026-06-08
17:42:00 | 19061:
Assert size optimizations | beaglebone-black
:lcd | (Same) |
2026-06-08
17:41:49 | 19061:
Assert size optimizations | lincoln60
:thttpd-binfs | (Same) |
2026-06-08
17:41:35 | 19061:
Assert size optimizations | pcduino-a10
:nsh | (Same) |
2026-06-08
17:41:20 | 19061:
Assert size optimizations | lincoln60
:netnsh | (Same) |
2026-06-08
17:40:38 | 19061:
Assert size optimizations | nucleo-f411re
:nsh | In file included from D:/a/nuttx/nuttx/sources/nuttx/include/nuttx/notifier.h:35,
from D:/a/nuttx/nuttx/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:296:14: error: expected ')' before 'g_sp_out_of_range_fmt'
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:296:7: note: to match this '('
296 | _alert(g_sp_out_of_range_fmt, sp);
| ^ |
2026-06-08
17:39:13 | 19061:
Assert size optimizations | nucleo-l152re
:nsh | (Unknown) |
2026-06-08
17:25:50 | 3532:
netutils/dropbear:
initial Dropbear SSH server por | sim
:lua | v e r a g e S p e e d T i m e T i m e T iDmle o aCdu r rUepnlto
a d T o t a l S p e n t Left Speed
-:-- |
2026-06-08
17:15:08 | 19060:
include/cxx/cmath:
Define FLT_EVAL_METHOD from com | esp32s3-devkit
:oneshot | Killing pytest after timeout... |
2026-06-08
17:05:38 | 19060:
include/cxx/cmath:
Define FLT_EVAL_METHOD from com | esp32p4-function-ev-board
:tickless | (Same) |
2026-06-08
17:03:47 | 3531:
examples/elf:
extend nxpkg validation coverage | esp32s3-devkit
:ulp | (Same) |
2026-06-08
16:54:50 | 3531:
examples/elf:
extend nxpkg validation coverage | esp32p4-function-ev-board
:pm | (Same) |
2026-06-08
16:36:06 | 19060:
include/cxx/cmath:
Define FLT_EVAL_METHOD from com | stm32f103-minimum
:adb | DDlolaoda d U pUlpolaoda d T oTtoatla l S pSepnetn t L e fLte f tS p eSepde
ed |
2026-06-08
15:35:08 | 19060:
include/cxx/cmath:
Define FLT_EVAL_METHOD from com | esp32c3-legacy-devkit
:wifi | R e0c e i v e d0 % X f0e r d A0v era g0e S p e e0d T i m0e T i0m e- - : - - :T-i-m e- - :C-u-r:r-e-n t-
- : - - : - - 0 |
2026-06-08
15:21:18 | 19062:
boards/esp32c3-devkit:
add Dropbear SSH server con | esp32c3-devkit
:dropbear | 33d32
< CONFIG_FS_PROCFS=y
35a35
> CONFIG_FS_PROCFS=y
49,58d48
< CONFIG_NETUTILS_DROPBEAR=y
< CONFIG_NETUTILS_DROPBEAR_HOSTKEY_PATH="/data/dropbear_ecdsa_host_key"
< CONFIG_NETUTILS_DROPBEAR_LISTEN_RETRY_MAX=120
< CONFIG_NETUTILS_DROPBEAR_LISTEN_RETRIES=0
< CONFIG_NETUTILS_DROPBEAR_STACKSIZE=65536
< CONFIG_NSH_DROPBEAR=y
< CONFIG_PSEUDOTERM=y
< CONFIG_PSEUDOTERM_SUSV1=y
< CONFIG_PSEUDOTERM_RXBUFSIZE=1024
< CONFIG_PSEUDOTERM_TXBUFSIZE=2048
60,62d49
< CONFIG_N |
2026-06-08
15:11:14 | 19062:
boards/esp32c3-devkit:
add Dropbear SSH server con | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvveeerrraaagggeee SSSpppeeeeeeddd TTTiiimmmeee TTTiiimmmeee TTTiiimmmeee CCCuuurrrrrreeennnttt
- -- |
2026-06-08
14:59:12 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | esp32s3-devkit
:watchdog | Killing pytest after timeout... |
2026-06-08
14:54:39 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | esp32p4-function-ev-board
:spiflash | (Same) |
2026-06-08
14:52:17 | 19060:
include/cxx/cmath:
Define FLT_EVAL_METHOD from com | spresense
:lte | [v3.6.2.zip]
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of v3.6.2.zip or
v3.6.2.zip.zip, and cannot find v3.6.2.zip.ZIP, period.
make[3]: *** [Makefile:81: mbedtls] Error 9
make[3]: Target 'context' not remade because of errors.
make[2] |
2026-06-08
14:35:22 | 19060:
include/cxx/cmath:
Define FLT_EVAL_METHOD from com | sim
:lua | S p e e d T i m e T i m e T i m e C u rDrleont |
2026-06-08
14:29:47 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | stm32f103-minimum
:adb | d |
2026-06-08
14:21:06 | 3531:
examples/elf:
extend nxpkg validation coverage | sim
:lua | e Time Time Current
al
S p0e n t 0 L e f t0 S p e e0d |
2026-06-08
14:18:40 | 19061:
Assert size optimizations | esp32s2-saola-1
:mcuboot_nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:18:31 | 19061:
Assert size optimizations | s698pm-dkit
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
At top level:
##[error]misc/assert.c:175:19: error: 'g_sp_out_of_range_fmt' defined but not used [-Werror=unused-const-variable=]
static const c |
2026-06-08
14:18:19 | 19061:
Assert size optimizations | esp32c3-devkit
:temperature_sensor | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:18:00 | 19061:
Assert size optimizations | s698pm-dkit
:smp | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:318:18: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, tcbstack_sp);
^
At top level: |
2026-06-08
14:17:51 | 19061:
Assert size optimizations | open1788
:fb | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:17:48 | 19061:
Assert size optimizations | heltec_wifi_lora32
:nsh | (Same) |
2026-06-08
14:17:48 | 19061:
Assert size optimizations | esp32s2-saola-1
:crypto | (Same) |
2026-06-08
14:17:35 | 19061:
Assert size optimizations | spresense
:coremark | (Same) |
2026-06-08
14:17:29 | 19061:
Assert size optimizations | xx3803
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
At top level:
##[error]misc/assert.c:175:19: error: 'g_sp_out_of_range_fmt' defined but not used [-Werror=unused-const-variable=]
static const c |
2026-06-08
14:17:25 | 19061:
Assert size optimizations | sabre-6quad
:netknsh_smp | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:17:19 | 19061:
Assert size optimizations | smartl-c906
:sotest | (Same) |
2026-06-08
14:17:14 | 19061:
Assert size optimizations | esp32s2-saola-1
:sdm | (Same) |
2026-06-08
14:17:13 | 19061:
Assert size optimizations | esp32c3-devkit
:sta_softap | (Same) |
2026-06-08
14:17:06 | 19061:
Assert size optimizations | qemu-i486
:nsh | (Same) |
2026-06-08
14:17:05 | 19061:
Assert size optimizations | lilygo_tbeam_lora_gps
:sx127x | (Same) |
2026-06-08
14:16:58 | 19061:
Assert size optimizations | open1788
:pwfb | (Same) |
2026-06-08
14:16:48 | 19061:
Assert size optimizations | spresense
:ostest | (Same) |
2026-06-08
14:16:39 | 19061:
Assert size optimizations | esp32s2-saola-1
:temperature_sensor | (Same) |
2026-06-08
14:16:29 | 19061:
Assert size optimizations | smartl-c906
:fpu | (Same) |
2026-06-08
14:16:28 | 19061:
Assert size optimizations | qemu-i486
:vga_fb | (Same) |
2026-06-08
14:16:24 | 19061:
Assert size optimizations | lilygo_tbeam_lora_gps
:nsh | (Same) |
2026-06-08
14:16:19 | 19061:
Assert size optimizations | open1788
:pdcurses | (Same) |
2026-06-08
14:16:10 | 19061:
Assert size optimizations | sabre-6quad
:netnsh | (Same) |
2026-06-08
14:15:59 | 19061:
Assert size optimizations | spresense
:smp | (Same) |
2026-06-08
14:15:54 | 19061:
Assert size optimizations | qemu-i486
:ostest | (Same) |
2026-06-08
14:15:43 | 19061:
Assert size optimizations | ox64
:nsh | (Same) |
2026-06-08
14:15:42 | 19061:
Assert size optimizations | lilygo_tbeam_lora_gps
:gps | (Same) |
2026-06-08
14:15:33 | 19061:
Assert size optimizations | rx65n-rsk2mb
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^~~~~~~~~~~~~~~~~~~~~
##[error]misc/assert.c:318:18: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, tcbstack_sp);
|
2026-06-08
14:15:33 | 19061:
Assert size optimizations | open1788
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:15:21 | 19061:
Assert size optimizations | csk6011a-nano
:nsh | (Same) |
2026-06-08
14:15:21 | 19061:
Assert size optimizations | esp32s2-saola-1
:sta_softap | (Same) |
2026-06-08
14:15:13 | 19061:
Assert size optimizations | esp32c3-devkit
:mcuboot_update_agent | (Same) |
2026-06-08
14:15:07 | 19061:
Assert size optimizations | rx65n-rsk2mb
:ipv6 | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^~~~~~~~~~~~~~~~~~~~~
##[error]misc/assert.c:318:18: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, tcbstack_sp);
|
2026-06-08
14:14:56 | 19061:
Assert size optimizations | ox64
:timer | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:14:50 | 19061:
Assert size optimizations | sabre-6quad
:knsh_smp | (Same) |
2026-06-08
14:14:41 | 19061:
Assert size optimizations | rx65n-rsk2mb
:netnsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^~~~~~~~~~~~~~~~~~~~~
##[error]misc/assert.c:318:18: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, tcbstack_sp);
|
2026-06-08
14:14:39 | 19061:
Assert size optimizations | c5471evm
:httpd | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:14:25 | 19061:
Assert size optimizations | esp32-ethernet-kit
:wifi | (Same) |
2026-06-08
14:14:16 | 19061:
Assert size optimizations | rx65n-grrose
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^~~~~~~~~~~~~~~~~~~~~
##[error]misc/assert.c:318:18: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, tcbstack_sp);
|
2026-06-08
14:14:10 | 19061:
Assert size optimizations | ox64
:spi | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:14:09 | 19061:
Assert size optimizations | esp32c3-devkit
:rtc | (Same) |
2026-06-08
14:14:09 | 19061:
Assert size optimizations | open1788
:knxterm | (Same) |
2026-06-08
14:13:59 | 19061:
Assert size optimizations | c5471evm
:nettest | (Same) |
2026-06-08
14:13:53 | 19061:
Assert size optimizations | esp32s2-saola-1
:mcuboot_update_agent | (Same) |
2026-06-08
14:13:41 | 19061:
Assert size optimizations | rx65n-grrose
:ipv6 | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^~~~~~~~~~~~~~~~~~~~~
##[error]misc/assert.c:318:18: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, tcbstack_sp);
|
2026-06-08
14:13:31 | 19061:
Assert size optimizations | esp32-ethernet-kit
:ethernet | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:13:29 | 19061:
Assert size optimizations | sabre-6quad
:knsh | (Same) |
2026-06-08
14:13:26 | 19061:
Assert size optimizations | esp32c3-devkit
:efuse | (Same) |
2026-06-08
14:13:13 | 19061:
Assert size optimizations | c5471evm
:nsh | (Same) |
2026-06-08
14:13:04 | 19061:
Assert size optimizations | rx65n-grrose
:netnsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^~~~~~~~~~~~~~~~~~~~~
##[error]misc/assert.c:318:18: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, tcbstack_sp);
|
2026-06-08
14:13:03 | 19061:
Assert size optimizations | esp32s2-saola-1
:rtc | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:12:56 | 19061:
Assert size optimizations | open1788
:knsh | (Same) |
2026-06-08
14:12:49 | 19061:
Assert size optimizations | esp32-ethernet-kit
:oneshot | (Same) |
2026-06-08
14:12:45 | 19061:
Assert size optimizations | ox64
:adc | (Same) |
2026-06-08
14:12:43 | 19061:
Assert size optimizations | esp32c3-devkit
:bmp180 | (Same) |
2026-06-08
14:12:37 | 19061:
Assert size optimizations | at32f437-mini
:systemview | (Same) |
2026-06-08
14:12:34 | 19061:
Assert size optimizations | pic32mx7mmb
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:295:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
14:12:26 | 19061:
Assert size optimizations | esp32s2-saola-1
:efuse | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:12:22 | 19061:
Assert size optimizations | sabre-6quad
:netnsh_ar8031 | (Same) |
2026-06-08
14:12:11 | 19061:
Assert size optimizations | pic32mx-starterkit
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:295:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
14:12:08 | 19061:
Assert size optimizations | at32f437-mini
:usbnsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:12:08 | 19061:
Assert size optimizations | esp32-ethernet-kit
:nsh | (Same) |
2026-06-08
14:12:04 | 19061:
Assert size optimizations | open1788
:nxlines | (Same) |
2026-06-08
14:12:01 | 19061:
Assert size optimizations | esp32c3-devkit
:ostest | (Same) |
2026-06-08
14:11:44 | 19061:
Assert size optimizations | sabre-6quad
:smp | (Unknown) |
2026-06-08
14:11:35 | 19061:
Assert size optimizations | pic32mx-starterkit
:nsh2 | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:295:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
14:11:34 | 19061:
Assert size optimizations | at32f437-mini
:can_socket | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:11:18 | 19061:
Assert size optimizations | esp32c3-devkit
:buttons | (Same) |
2026-06-08
14:11:16 | 19061:
Assert size optimizations | zkit-arm-1769
:nsh | (Same) |
2026-06-08
14:11:13 | 19061:
Assert size optimizations | sabre-6quad
:citest | (Same) |
2026-06-08
14:11:10 | 19061:
Assert size optimizations | ubw32
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:295:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
14:11:07 | 19061:
Assert size optimizations | at32f437-mini
:pwm | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:10:50 | 19061:
Assert size optimizations | esp32s2-saola-1
:ostest | (Same) |
2026-06-08
14:10:49 | 19061:
Assert size optimizations | esp32-c3-zero
:jumbo | (Unknown) |
2026-06-08
14:10:37 | 19061:
Assert size optimizations | at32f437-mini
:msc | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:10:35 | 19061:
Assert size optimizations | esp32-ethernet-kit
:autopm | (Same) |
2026-06-08
14:10:29 | 19061:
Assert size optimizations | zkit-arm-1769
:hello | (Same) |
2026-06-08
14:10:09 | 19061:
Assert size optimizations | esp32s2-saola-1
:buttons | (Same) |
2026-06-08
14:10:09 | 19061:
Assert size optimizations | at32f437-mini
:nsh | (Same) |
2026-06-08
14:09:56 | 19061:
Assert size optimizations | sure-pic32mx
:usbnsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:295:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
14:09:50 | 19061:
Assert size optimizations | esp32-c3-zero
:wifi | (Unknown) |
2026-06-08
14:09:44 | 19061:
Assert size optimizations | esp32s2-saola-1
:sotest | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:09:36 | 19061:
Assert size optimizations | esp32-ethernet-kit
:rtc | (Same) |
2026-06-08
14:09:28 | 19061:
Assert size optimizations | zkit-arm-1769
:nxhello | (Same) |
2026-06-08
14:09:26 | 19061:
Assert size optimizations | at32f437-mini
:sdcard | (Same) |
2026-06-08
14:09:26 | 19061:
Assert size optimizations | sure-pic32mx
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:295:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
14:09:04 | 19061:
Assert size optimizations | flipnclick-pic32mz
:nsh | (Same) |
2026-06-08
14:08:59 | 19061:
Assert size optimizations | esp32-c3-zero
:usbnsh | (Unknown) |
2026-06-08
14:08:58 | 19061:
Assert size optimizations | at32f437-mini
:adc | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:08:55 | 19061:
Assert size optimizations | esp32-ethernet-kit
:buttons | (Same) |
2026-06-08
14:08:38 | 19061:
Assert size optimizations | flipnclick-pic32mz
:nxlines | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:295:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
14:08:35 | 19061:
Assert size optimizations | bl602evb
:dma | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:08:28 | 19061:
Assert size optimizations | u-blox-c027
:nsh | (Same) |
2026-06-08
14:08:22 | 19061:
Assert size optimizations | at32f437-mini
:eth | (Same) |
2026-06-08
14:08:14 | 19061:
Assert size optimizations | esp32-pico-kit
:nsh | (Same) |
2026-06-08
14:08:08 | 19061:
Assert size optimizations | pic32mz-starterkit
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:295:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
14:07:53 | 19061:
Assert size optimizations | at32f437-mini
:can_char | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:07:51 | 19061:
Assert size optimizations | lincoln60
:nsh | (Same) |
2026-06-08
14:07:47 | 19061:
Assert size optimizations | esp32-c3-zero
:nsh | (Same) |
2026-06-08
14:07:36 | 19061:
Assert size optimizations | chipkit-wifire
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35:0,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
_alert(g_sp_out_of_range_fmt, sp);
^
##[error]misc/assert.c:295:14: error: format '%s' expects a matching 'char *' argument [-Werror=format=]
cc1: all warnings being treated as errors |
2026-06-08
14:07:32 | 19061:
Assert size optimizations | ttgo_lora_esp32
:sx127x | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:07:12 | 19061:
Assert size optimizations | at32f437-mini
:usbserial | (Same) |
2026-06-08
14:07:10 | 19061:
Assert size optimizations | avr32dev1
:nsh | misc/assert.c: In function 'dump_stacks':
misc/assert.c:295: error: expected ')' before 'g_sp_out_of_range_fmt'
cc1: warnings being treated as errors
At top level:
cc1: error: unrecognized command line option "-Wno-cpp"
make[1]: *** [Makefile:65: assert.o] Error 1
make[1]: Target 'libsched.a' not remade because of errors.
make: *** [tools/LibTargets.mk:71: sched/libsched.a] Error 2
make: Target 'all' not remade because of errors. |
2026-06-08
14:07:05 | 19061:
Assert size optimizations | esp32-c3-zero
:sta_softap | (Unknown) |
2026-06-08
14:07:02 | 19061:
Assert size optimizations | lincoln60
:thttpd-binfs | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:06:52 | 19061:
Assert size optimizations | ttgo_lora_esp32
:nsh | (Same) |
2026-06-08
14:06:46 | 19061:
Assert size optimizations | avr32dev1
:ostest | misc/assert.c: In function 'dump_stacks':
misc/assert.c:295: error: expected ')' before 'g_sp_out_of_range_fmt'
cc1: warnings being treated as errors
At top level:
cc1: error: unrecognized command line option "-Wno-cpp"
make[1]: *** [Makefile:65: assert.o] Error 1
make[1]: Target 'libsched.a' not remade because of errors.
make: *** [tools/LibTargets.mk:71: sched/libsched.a] Error 2
make: Target 'all' not remade because of errors. |
2026-06-08
14:06:34 | 19061:
Assert size optimizations | lincoln60
:netnsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:06:30 | 19061:
Assert size optimizations | mizar32a
:nsh | misc/assert.c: In function 'dump_stacks':
misc/assert.c:295: error: expected ')' before 'g_sp_out_of_range_fmt'
cc1: warnings being treated as errors
At top level:
cc1: error: unrecognized command line option "-Wno-cpp"
make[1]: *** [Makefile:65: assert.o] Error 1
make[1]: Target 'libsched.a' not remade because of errors.
make: *** [tools/LibTargets.mk:71: sched/libsched.a] Error 2
make: Target 'all' not remade because of errors. |
2026-06-08
14:06:30 | 19061:
Assert size optimizations | at32f437-mini
:rtc | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:06:10 | 19061:
Assert size optimizations | ttgo_t_display_esp32
:nsh | (Same) |
2026-06-08
14:05:46 | 19061:
Assert size optimizations | t3-gem-o1
:nsh | (Same) |
2026-06-08
14:05:30 | 19061:
Assert size optimizations | sim
:lua | T i m e T i m e Dload U p lCouardr e n tT
o t a l S p e n t L e f t S p e e d
Dl
o a d0 U p l o a0d T0o t a l 0 S p e n0t L0e f t S p0e e d
Spent
0 L e f t 0 Speed |
2026-06-08
14:05:17 | 19061:
Assert size optimizations | beaglebone-black
:nsh | In file included from /github/workspace/sources/nuttx/include/nuttx/notifier.h:35,
from /github/workspace/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| |
2026-06-08
14:04:48 | 19061:
Assert size optimizations | ttgo_t_display_esp32
:lvgl_fb | (Same) |
2026-06-08
14:04:36 | 19061:
Assert size optimizations | beaglebone-black
:lcd | (Same) |
2026-06-08
14:04:15 | 19061:
Assert size optimizations | pcduino-a10
:nsh | (Same) |
2026-06-08
14:04:10 | 19061:
Assert size optimizations | ttgo_t_display_esp32
:lvgl_lcd | (Same) |
2026-06-08
13:36:52 | 19061:
Assert size optimizations | qemu-armv8a
:nsh_smp | In file included from D:/a/nuttx/nuttx/sources/nuttx/include/nuttx/notifier.h:35,
from D:/a/nuttx/nuttx/sources/nuttx/include/nuttx/panic_notifier.h:31,
from misc/assert.c:43:
misc/assert.c: In function 'dump_stacks':
##[error]misc/assert.c:295:14: error: expected ')' before 'g_sp_out_of_range_fmt'
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^~~~~~~~~~~~~~~~~~~~~
misc/assert.c:295:7: note: to match this '('
295 | _alert(g_sp_out_of_range_fmt, sp);
| ^ |
2026-06-08
13:32:54 | 19061:
Assert size optimizations | nucleo-f411re
:nsh | (Same) |
2026-06-08
13:31:25 | 19061:
Assert size optimizations | nucleo-l152re
:nsh | (Unknown) |
2026-06-08
12:11:30 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | sim
:lua | 0 % Total % Received % Xferd Average Speed Time Time Time Current |
2026-06-08
06:52:07 | 19058:
tools:
Enable Rust sim builds on Intel Macs | sim
:zipfs | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of zlib13.zip or
zlib13.zip.zip, and cannot find zlib13.zip.ZIP, period.
make[3]: *** [Makefile:45: zlib] Error 9
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: |
2026-06-08
06:51:08 | 19058:
tools:
Enable Rust sim builds on Intel Macs | esp32-lyrat
:audio | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:59: cJSON] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/netutils/cjson_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
make: Tar |
2026-06-08
06:50:56 | 19058:
tools:
Enable Rust sim builds on Intel Macs | esp32c3-legacy-devkit
:cxx | tar: This does not look like a tar archive
xz: (stdin): File format not recognized
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[1]: *** [libcxx/Make.defs:31: libcxx/libcxx] Error 2
make[1]: Target 'context' not remade because of errors.
make: *** [tools/Unix.mk:471: libs/libxx/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-06-08
06:50:26 | 19058:
tools:
Enable Rust sim builds on Intel Macs | thingy52
:nsh | CMake Error at /github/workspace/sources/nuttx/build/_deps/systemview-subbuild/systemview-populate-prefix/src/systemview-populate-stamp/download-systemview-populate.cmake:170 (message):
Each download failed!
error: downloading 'https://github.com/NuttX/nuttx/releases/download/systemview/SystemView_Src_V356.zip' failed
status_code: 22
status_string: "HTTP response code said error"
log:
--- LOG BEGIN ---
Trying 140.82.116.3:443...
Connected to github.com (140.82.116.3) port 443 (#0) |
2026-06-08
06:49:55 | 19058:
tools:
Enable Rust sim builds on Intel Macs | qemu-armv8a
:fastboot | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of libmetal.zip or
libmetal.zip.zip, and cannot find libmetal.zip.ZIP, period.
make[1]: *** [libmetal.defs:83: libmetal.zip] Error 9
make[1]: Target 'context' not remade because of errors.
End-of- |
2026-06-08
06:47:41 | 19058:
tools:
Enable Rust sim builds on Intel Macs | qemu-armv8a
:nsh | CMake Error at /github/workspace/sources/nuttx/build/_deps/dtc-subbuild/dtc-populate-prefix/src/dtc-populate-stamp/download-dtc-populate.cmake:170 (message):
Each download failed!
error: downloading 'https://github.com/dgibson/dtc/archive/v1.7.0.zip' failed
status_code: 22
status_string: "HTTP response code said error"
log:
--- LOG BEGIN ---
Trying 140.82.114.4:443...
Connected to github.com (140.82.114.4) port 443 (#0)
ALPN: offers h2
ALPN: offers http/1.1
[CONN-0-0][CF-S |
2026-06-08
06:44:43 | 19058:
tools:
Enable Rust sim builds on Intel Macs | lckfb-szpi-esp32s3
:txtable | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of master.zip or
master.zip.zip, and cannot find master.zip.ZIP, period.
make[3]: *** [Makefile:35: /github/workspace/sources/apps/system/adb/microADB] Error 9
make[3]: Target 'context' not remade be |
2026-06-08
06:44:21 | 19058:
tools:
Enable Rust sim builds on Intel Macs | esp32-lyrat
:rtptools | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:118: rtptools] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/netutils/rtptools_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
ma |
2026-06-08
06:43:05 | 19058:
tools:
Enable Rust sim builds on Intel Macs | lpcxpresso-lpc54628
:lvgl | [v9.2.2.zip]
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of v9.2.2.zip or
v9.2.2.zip.zip, and cannot find v9.2.2.zip.ZIP, period.
make[3]: *** [Makefile:80: lvgl] Error 9
make[3]: Target 'context' not remade because of errors.
make[2]: * |
2026-06-08
06:41:04 | 19058:
tools:
Enable Rust sim builds on Intel Macs | lckfb-szpi-esp32s3
:camera | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of v1.46.0.zip or
v1.46.0.zip.zip, and cannot find v1.46.0.zip.ZIP, period.
make[3]: *** [Makefile:40: libuv] Error 9
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile |
2026-06-08
06:40:56 | 19058:
tools:
Enable Rust sim builds on Intel Macs | esp32-audio-kit
:wifi | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:76: argtable3] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/system/argtable3_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
mak |
2026-06-08
06:40:07 | 19058:
tools:
Enable Rust sim builds on Intel Macs | imxrt1060-evk
:netnsh | (Same) |
2026-06-08
06:36:01 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | qemu-armv8a
:netnsh_smp | a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of open-amp.zip or
open-amp.zip.zip, and cannot find open-amp.zip.ZIP, period.
make[1]: *** [open-amp.defs:67: open-amp.zip] Error 9
make[1]: Target 'context' not remade because of errors.
make: *** [tools/Unix.mk:471: openamp/.context] Error 2
make: Target 'all' not |
2026-06-08
06:35:34 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | sim
:wamr | [main.zip]
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of main.zip or
main.zip.zip, and cannot find main.zip.ZIP, period.
make[3]: *** [Makefile:111: coremark] Error 9
make[3]: Target 'context' not remade because of errors.
make[2]: *** |
2026-06-08
06:35:21 | 19058:
tools:
Enable Rust sim builds on Intel Macs | qemu-armv8a
:xedge_demo | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of libmetal.zip or
libmetal.zip.zip, and cannot find libmetal.zip.ZIP, period.
make[1]: *** [libmetal.defs:83: libmetal.zip] Error 9
make[1]: Target 'context' not remade because of errors.
make: T |
2026-06-08
06:35:21 | 19058:
tools:
Enable Rust sim builds on Intel Macs | canmv230
:master | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of open-amp.zip or
open-amp.zip.zip, and cannot find open-amp.zip.ZIP, period.
make[1]: *** [open-amp.defs:67: open-amp.zip] Error 9
make[1]: Target 'context' not remade because of errors.
make: * |
2026-06-08
06:35:01 | 19058:
tools:
Enable Rust sim builds on Intel Macs | verdin-mx8mp
:rpmsg | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of libmetal.zip or
libmetal.zip.zip, and cannot find libmetal.zip.ZIP, period.
make[1]: *** [libmetal.defs:83: libmetal.zip] Error 9
make[1]: Target 'context' not remade because of errors.
make: * |
2026-06-08
06:35:01 | 19058:
tools:
Enable Rust sim builds on Intel Macs | gd32f450zk-eval
:spilfsnsh | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[1]: *** [littlefs/Make.defs:68: .littlefsunpack] Error 2
make[1]: Target 'context' not remade because of errors.
make: *** [tools/Unix.mk:471: fs/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-06-08
06:34:55 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | esp32c3-legacy-devkit
:sta_softap | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:76: argtable3] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/system/argtable3_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
mak |
2026-06-08
06:34:48 | 19058:
tools:
Enable Rust sim builds on Intel Macs | teensy-4.x
:lua-4.1 | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:76: v5.4.0.tar.gz] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/interpreters/lua_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
|
2026-06-08
06:34:36 | 19058:
tools:
Enable Rust sim builds on Intel Macs | esp32c3-legacy-devkit
:sta_softap | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:76: argtable3] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/system/argtable3_context] Error 2
gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:59: cJSON] Error 2
make[3]: Target 'context' not remade b |
2026-06-08
06:33:58 | 19058:
tools:
Enable Rust sim builds on Intel Macs | esp32s3-eye
:wifi | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:59: cJSON] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/netutils/cjson_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
make: Tar |
2026-06-08
06:33:40 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | gd32f470zk-eval
:spilfsnsh | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[1]: *** [littlefs/Make.defs:68: .littlefsunpack] Error 2
make[1]: Target 'context' not remade because of errors.
make: *** [tools/Unix.mk:471: fs/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-06-08
06:32:15 | 19058:
tools:
Enable Rust sim builds on Intel Macs | qemu-armv8a
:rpproxy | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of open-amp.zip or
open-amp.zip.zip, and cannot find open-amp.zip.ZIP, period.
make[1]: *** [open-amp.defs:67: open-amp.zip] Error 9
make[1]: Target 'context' not remade because of errors.
make: * |
2026-06-08
06:31:33 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | esp32s3-box
:lvgl | [v9.2.2.zip]
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of v9.2.2.zip or
v9.2.2.zip.zip, and cannot find v9.2.2.zip.ZIP, period.
make[3]: *** [Makefile:80: lvgl] Error 9
make[3]: Target 'context' not remade because of errors.
make[2]: * |
2026-06-08
06:30:27 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | esp32c3-legacy-devkit
:coremark | [main.zip]
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of main.zip or
main.zip.zip, and cannot find main.zip.ZIP, period.
make[3]: *** [Makefile:111: coremark] Error 9
make[3]: Target 'context' not remade because of errors.
make[2]: *** |
2026-06-08
06:29:33 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | gd32f470ik-eval
:fmclfsnsh | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[1]: *** [littlefs/Make.defs:68: .littlefsunpack] Error 2
make[1]: Target 'context' not remade because of errors.
make: *** [tools/Unix.mk:471: fs/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-06-08
06:28:14 | 19058:
tools:
Enable Rust sim builds on Intel Macs | esp32c6-devkitc
:wifi | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:59: cJSON] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/netutils/cjson_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
make: Tar |
2026-06-08
06:28:13 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | qemu-armv8a
:netnsh | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:76: argtable3] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/system/argtable3_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
mak |
2026-06-08
06:27:54 | 19058:
tools:
Enable Rust sim builds on Intel Macs | canmv230
:remote | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of open-amp.zip or
open-amp.zip.zip, and cannot find open-amp.zip.ZIP, period.
make[1]: *** [open-amp.defs:67: open-amp.zip] Error 9
make[1]: Target 'context' not remade because of errors.
make: * |
2026-06-08
06:27:28 | 19058:
tools:
Enable Rust sim builds on Intel Macs | sim
:tflm | (Unknown) |
2026-06-08
06:26:54 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | sim
:tflm | (Same) |
2026-06-08
06:26:32 | 19058:
tools:
Enable Rust sim builds on Intel Macs | qemu-armv8a
:netnsh | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of fdt/dtc.zip or
fdt/dtc.zip.zip, and cannot find fdt/dtc.zip.ZIP, period.
make[1]: *** [fdt/Make.defs:32: dtc] Error 9
make[1]: Target 'context' not remade because of errors.
make: *** [tools/Un |
2026-06-08
06:24:51 | 19058:
tools:
Enable Rust sim builds on Intel Macs | esp32s3-box
:lvgl | [v9.2.2.zip]
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of v9.2.2.zip or
v9.2.2.zip.zip, and cannot find v9.2.2.zip.ZIP, period.
make[3]: *** [Makefile:80: lvgl] Error 9
make[3]: Target 'context' not remade because of errors.
make[2]: * |
2026-06-08
06:23:53 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | imxrt1064-evk
:mcuboot-loader | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:89: mcuboot] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/boot/mcuboot_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
make: Tar |
2026-06-08
06:23:33 | 19058:
tools:
Enable Rust sim builds on Intel Macs | sim
:tcpblaster | CMake Error at /github/workspace/sources/nuttx/build/_deps/littlefs-subbuild/littlefs-populate-prefix/src/littlefs-populate-stamp/download-littlefs-populate.cmake:170 (message):
Each download failed!
error: downloading 'https://github.com/ARMmbed/littlefs/archive/v2.5.1.tar.gz' failed
status_code: 22
status_string: "HTTP response code said error"
log:
--- LOG BEGIN ---
Trying 140.82.112.3:443...
Connected to github.com (140.82.112.3) port 443 (#0)
ALPN: offers h2
ALPN: offers |
2026-06-08
06:23:04 | 19058:
tools:
Enable Rust sim builds on Intel Macs | gd32f470ik-eval
:fmclfsnsh | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[1]: *** [littlefs/Make.defs:68: .littlefsunpack] Error 2
make[1]: Target 'context' not remade because of errors.
make: *** [tools/Unix.mk:471: fs/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-06-08
06:22:41 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | esp32-devkitc
:mqttc | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:40: MQTT-C] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/netutils/mqttc_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
make: Ta |
2026-06-08
06:21:48 | 19058:
tools:
Enable Rust sim builds on Intel Macs | imxrt1064-evk
:lvgl | [v9.2.2.zip]
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of v9.2.2.zip or
v9.2.2.zip.zip, and cannot find v9.2.2.zip.ZIP, period.
make[3]: *** [Makefile:80: lvgl] Error 9
make[3]: Target 'context' not remade because of errors.
make[2]: * |
2026-06-08
06:18:10 | 19058:
tools:
Enable Rust sim builds on Intel Macs | esp32c3-devkit
:wifi | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:59: cJSON] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/netutils/cjson_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
make: Tar |
2026-06-08
06:18:09 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | esp32-devkitc
:sta_softap | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:76: argtable3] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/system/argtable3_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
mak |
2026-06-08
06:18:07 | 3529:
examples/rng90:
add Microchip RNG90 example applic | nucleo-h753zi
:jumbo | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[1]: *** [littlefs/Make.defs:68: .littlefsunpack] Error 2
make[1]: Target 'context' not remade because of errors.
make: *** [tools/Unix.mk:471: fs/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-06-08
06:17:57 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | sim
:rtptools | CMake Error at /github/workspace/sources/nuttx/build/_deps/rtptools_fetch-subbuild/rtptools_fetch-populate-prefix/src/rtptools_fetch-populate-stamp/download-rtptools_fetch-populate.cmake:170 (message):
Each download failed!
error: downloading 'https://github.com/irtlab/rtptools/archive/9356740cb0c264577e0f9505e682e53a1e0996d5.tar.gz' failed
status_code: 22
status_string: "HTTP response code said error"
log:
--- LOG BEGIN ---
Trying 140.82.116.3:443...
Connected to github.com (140.8 |
2026-06-08
06:17:52 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | esp32s2-kaluga-1
:lvgl_ili9341 | [v9.2.2.zip]
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of v9.2.2.zip or
v9.2.2.zip.zip, and cannot find v9.2.2.zip.ZIP, period.
make[3]: *** [Makefile:80: lvgl] Error 9
make[3]: Target 'context' not remade because of errors.
make[2]: * |
2026-06-08
06:17:44 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | sim
:rpserver_virtio | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of libmetal.zip or
libmetal.zip.zip, and cannot find libmetal.zip.ZIP, period.
make[1]: *** [libmetal.defs:83: libmetal.zip] Error 9
make[1]: Target 'context' not remade because of errors.
make: * |
2026-06-08
06:17:33 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | esp32s3-korvo-2
:rtptools | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:59: cJSON] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/netutils/cjson_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
make: Tar |
2026-06-08
06:17:32 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | sim
:rpserver_uart | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of libmetal.zip or
libmetal.zip.zip, and cannot find libmetal.zip.ZIP, period.
make[1]: *** [libmetal.defs:83: libmetal.zip] Error 9
make[1]: Target 'context' not remade because of errors.
make: T |
2026-06-08
06:17:22 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | sim
:rpserver | CMake Error at /github/workspace/sources/nuttx/build/_deps/libmetal-subbuild/libmetal-populate-prefix/src/libmetal-populate-stamp/download-libmetal-populate.cmake:170 (message):
Each download failed!
error: downloading 'https://github.com/OpenAMP/libmetal/archive/v2025.10.0.zip' failed
status_code: 22
status_string: "HTTP response code said error"
log:
--- LOG BEGIN ---
Trying 140.82.116.3:443...
Connected to github.com (140.82.116.3) port 443 (#0)
ALPN: offers h2
ALPN: offer |
2026-06-08
06:17:10 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | sim
:rpproxy_virtio | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of libmetal.zip or
libmetal.zip.zip, and cannot find libmetal.zip.ZIP, period.
make[1]: *** [libmetal.defs:83: libmetal.zip] Error 9
make[1]: Target 'context' not remade because of errors.
make: * |
2026-06-08
06:17:08 | 19058:
tools:
Enable Rust sim builds on Intel Macs | ttgo_t_display_esp32
:lvgl_fb | [v9.2.2.zip]
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of v9.2.2.zip or
v9.2.2.zip.zip, and cannot find v9.2.2.zip.ZIP, period.
make[3]: *** [Makefile:80: lvgl] Error 9
make[3]: Target 'context' not remade because of errors.
make[2]: * |
2026-06-08
06:16:58 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | sim
:rpproxy_uart | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of libmetal.zip or
libmetal.zip.zip, and cannot find libmetal.zip.ZIP, period.
make[1]: *** [libmetal.defs:83: libmetal.zip] Error 9
make[1]: Target 'context' not remade because of errors.
make: * |
2026-06-08
06:16:43 | 19058:
tools:
Enable Rust sim builds on Intel Macs | lc823450-xgevk
:rndis | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:76: argtable3] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/system/argtable3_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
mak |
2026-06-08
06:16:26 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | sim
:rpproxy | CMake Error at /github/workspace/sources/nuttx/build/_deps/libmetal-subbuild/libmetal-populate-prefix/src/libmetal-populate-stamp/download-libmetal-populate.cmake:170 (message):
Each download failed!
error: downloading 'https://github.com/OpenAMP/libmetal/archive/v2025.10.0.zip' failed
status_code: 22
status_string: "HTTP response code said error"
log:
--- LOG BEGIN ---
Trying 140.82.116.4:443...
Connected to github.com (140.82.116.4) port 443 (#0)
ALPN: offers h2
ALPN: offer |
2026-06-08
06:15:08 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | esp32c3-devkit
:wifi | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:76: argtable3] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/system/argtable3_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
mak |
2026-06-08
06:12:34 | 19058:
tools:
Enable Rust sim builds on Intel Macs | esp32s3-korvo-2
:rtptools | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:118: rtptools] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/netutils/rtptools_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
ma |
2026-06-08
06:11:52 | 19058:
tools:
Enable Rust sim builds on Intel Macs | sim
:rpserver_uart | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:76: argtable3] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/system/argtable3_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
mak |
2026-06-08
06:11:50 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | esp32c3-devkit
:nimble | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:47: mynewt-nimble] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/wireless/bluetooth/nimble_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] E |
2026-06-08
06:10:56 | 19058:
tools:
Enable Rust sim builds on Intel Macs | qemu-armv8a
:netnsh_hv | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of libmetal.zip or
libmetal.zip.zip, and cannot find libmetal.zip.ZIP, period.
make[1]: *** [libmetal.defs:83: libmetal.zip] Error 9
make[1]: Target 'context' not remade because of errors.
a zipfi |
2026-06-08
06:10:17 | 19058:
tools:
Enable Rust sim builds on Intel Macs | esp32c6-devkitc
:autopm | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:59: cJSON] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/netutils/cjson_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
make: Tar |
2026-06-08
05:46:42 | 3530:
apps/tools:
Enable Rust sim builds on Intel Macs | sim
:lua | % %T oTtoatla l % %R eRceeicveeidv e%d Xferd Average Speed Time Time Time Current
d A v e r a g e S p e e d T i m e T Dload Upload ime Time Current |
2026-06-08
05:42:30 | 19058:
tools:
Enable Rust sim builds on Intel Macs | sim
:lua | T i m e T Dliomaed CUuprlroad Total Spent Left Speed |
2026-06-08
04:51:58 | 3529:
examples/rng90:
add Microchip RNG90 example applic | esp32p4-function-ev-board
:pwm | Killing pytest after timeout... |
2026-06-08
02:47:30 | 3529:
examples/rng90:
add Microchip RNG90 example applic | sim
:lua | uirmree
n t C
0u r r e n t |
2026-06-08
02:45:28 | 19056:
drivers/crypto:
add Microchip RNG90 support, esp32 | esp32c3-devkit
:rng90 | 28d27
< CONFIG_EXAMPLES_RNG90=y
Saving the new configuration file |
2026-06-08
02:39:53 | 19056:
drivers/crypto:
add Microchip RNG90 support, esp32 | sim
:lua | d Dl Aoad Upload Total Spent Left Speed |
2026-06-08
02:23:46 | 3529:
examples/rng90:
add Microchip RNG90 example applic | sim
:lua | r e n t
D l o ad UDpllooaadd U pTlootaadl TSopteanlt S pLeenftt S pLeeefdt
S
p e e0d |
2026-06-08
02:17:53 | 19056:
drivers/crypto:
add Microchip RNG90 support, esp32 | esp32c3-devkit
:rng90 | 28d27
< CONFIG_EXAMPLES_RNG90=y
Saving the new configuration file |
2026-06-08
02:08:57 | 19056:
drivers/crypto:
add Microchip RNG90 support, esp32 | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvevereraragagege e S SpSpepeeedee dd T i TmTeii mm e e T i m eTT ii m me e T i m e TT iiCmmee CCuurrrreenntt |
2026-06-07
15:27:42 | 19050:
tools/nxstyle:
Whitelist lifecycle_msgs GetState/S | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-07
15:15:28 | 19050:
tools/nxstyle:
Whitelist lifecycle_msgs GetState/S | esp32p4-function-ev-board
:ulp | (Same) |
2026-06-07
14:17:45 | 19050:
tools/nxstyle:
Whitelist lifecycle_msgs GetState/S | lckfb-szpi-esp32s3
:fastboot_tcp | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:59: cJSON] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/netutils/cjson_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
make: Tar |
2026-06-07
14:12:03 | 19050:
tools/nxstyle:
Whitelist lifecycle_msgs GetState/S | esp32c3-legacy-devkit
:wifi | (Same) |
2026-06-07
14:04:37 | 19050:
tools/nxstyle:
Whitelist lifecycle_msgs GetState/S | gd32f450zk-eval
:fmclfsnsh | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[1]: *** [littlefs/Make.defs:68: .littlefsunpack] Error 2
make[1]: Target 'context' not remade because of errors.
make: *** [tools/Unix.mk:471: fs/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-06-07
13:57:09 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | rv-virt
:netnsh | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:76: argtable3] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/system/argtable3_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
End |
2026-06-07
13:57:01 | 19050:
tools/nxstyle:
Whitelist lifecycle_msgs GetState/S | esp32-devkitc
:audio | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:76: argtable3] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/system/argtable3_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
mak |
2026-06-07
13:56:59 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f103-minimum
:adb | D lDolaoda d U pUlpolaoda d T oTtoatla l S pSpeenntt L eLfetf t S pSepeede
d |
2026-06-07
13:10:54 | 19050:
tools/nxstyle:
Whitelist lifecycle_msgs GetState/S | sim
:lua | X f e r0 d Av e ra g e S p e e d T im e Time T i m e D lCouardr e nUtp
l o a d T o t a l S p e n t L e f t S p e eDdl
oad
U p0l o a d 0 T o t a0l S p0e n t 0 L e f t0 S p e e d0 |
2026-06-07
12:58:37 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32s2-kaluga-1
:lvgl_ili9341 | [v9.2.2.zip]
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of v9.2.2.zip or
v9.2.2.zip.zip, and cannot find v9.2.2.zip.ZIP, period.
make[3]: *** [Makefile:80: lvgl] Error 9
make[3]: Target 'context' not remade because of errors.
make[2]: * |
2026-06-07
12:28:18 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | sim
:lua | t |
2026-06-07
12:17:24 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-07
12:09:08 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | esp32p4-function-ev-board
:timers | (Same) |
2026-06-07
11:36:44 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | stm32f103-minimum
:adb | e n t
D l o ad D lUpolaoda d U pToltoaal d Sp eTnott a l L ef tS p eSnpete d |
2026-06-07
11:31:34 | 19053:
video/fb:
Handle case of multiple displays where s | esp32s3-devkit
:pwm | Killing pytest after timeout... |
2026-06-07
11:17:53 | 19053:
video/fb:
Handle case of multiple displays where s | esp32p4-function-ev-board
:pwm | (Same) |
2026-06-07
10:04:44 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | sim
:lua | % % Total % Received % Xferd Average Speed Time Time Time Current
T o t a l % R eceived % % T o t aDll o a d % URpelcoeaidv e d T%o tXafle r d S pAevnetr a g e LSepfete d S p eTeidm
e
T i m0e T0i m e 0C u r r e n0t |
2026-06-07
09:38:24 | 19053:
video/fb:
Handle case of multiple displays where s | sim
:rtptools | CMake Error at /github/workspace/sources/nuttx/build/_deps/rtptools_fetch-subbuild/rtptools_fetch-populate-prefix/src/rtptools_fetch-populate-stamp/download-rtptools_fetch-populate.cmake:170 (message):
Each download failed!
error: downloading 'https://github.com/irtlab/rtptools/archive/9356740cb0c264577e0f9505e682e53a1e0996d5.tar.gz' failed
status_code: 22
status_string: "HTTP response code said error"
log:
--- LOG BEGIN ---
Trying 140.82.114.4:443...
Connected to github.com (140.8 |
2026-06-07
09:37:47 | 19053:
video/fb:
Handle case of multiple displays where s | esp32s2-saola-1
:wifi | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:76: argtable3] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/system/argtable3_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
mak |
2026-06-07
09:22:29 | 19053:
video/fb:
Handle case of multiple displays where s | sabre-6quad
:netnsh | a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of master.zip or
master.zip.zip, and cannot find master.zip.ZIP, period.
make[3]: *** [Makefile:35: /github/workspace/sources/apps/system/adb/microADB] Error 9
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/a |
2026-06-07
09:12:28 | 19053:
video/fb:
Handle case of multiple displays where s | sim
:lua | % Received % Xferd Average S % Total % Received % Xferd p eAevedrage Sp e e d T i mT ei m e T i mT ei m e D lT oi amTdei m eC u rCruernrte
n t
U p l o a d T o t a l S p e n t LD elDfoltao da dS pU epUelpdol
aoda d
T 0oT to at l a l 0 S p Se pn0et n t 0L eL fe tf t0 S pS ep ee de0
d |
2026-06-07
00:48:54 | 19049:
fs/vfs:
inherit ownership in pseudofile_create | esp32s3-devkit
:pwm | Killing pytest after timeout... |
2026-06-07
00:40:11 | 19049:
fs/vfs:
inherit ownership in pseudofile_create | esp32p4-function-ev-board
:pwm | (Same) |
2026-06-06
23:28:10 | 19051:
drivers/contactless/pn532:
Fix potential overflow | esp32s3-devkit
:toywasm | (Same) |
2026-06-06
22:49:05 | 19049:
fs/vfs:
inherit ownership in pseudofile_create | esp32-audio-kit
:audio | :100 - -3:4-0-k 1 0 00 |
2026-06-06
22:34:10 | 19051:
drivers/contactless/pn532:
Fix potential overflow | stm32f103-minimum
:adb | eed
T0i m e 0 T i m0e 0T i m e 0 C u r r e0n t |
2026-06-06
21:00:10 | 19050:
tools/nxstyle:
Whitelist lifecycle_msgs GetState/S | esp32p4-function-ev-board
:ulp | Killing pytest after timeout... |
2026-06-06
20:43:15 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32p4-function-ev-board
:timers | (Same) |
2026-06-06
20:42:22 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | nucleo-f746zg
:note | board/stm32_qencoder.c:37:10: fatal error: 'stm32_qencoder.h' file not found
37 | #include "stm32_qencoder.h"
| ^~~~~~~~~~~~~~~~~~
1 error generated.
ERROR: clang failed: 1
command: clang -MT ./stm32_qencoder.o -M '-Wno-atomic-alignment' '-Wstrict-prototypes' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-atomic-alignment' '-Wstrict-prototypes' '-Wno-attributes' '-Wno-unknown-pragmas' '-fomit-frame-pointer' '-fno-builtin' '-fshort-enums' '-fno-common' '-Wall' '-Wshadow' '-Wundef' |
2026-06-06
20:32:16 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:qencoder | board/stm32_qencoder.c:38:10: fatal error: stm32_qencoder.h: No such file or directory
38 | #include "stm32_qencoder.h"
| ^~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: arm-none-eabi-gcc failed: 1
command: arm-none-eabi-gcc -MT ./stm32_qencoder.o -M '-Wstrict-prototypes' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Wstrict-prototypes' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-fomit-frame-pointer' '--param=min-pagesize=0' '-fno-common' '-Wall' '-Wshadow' |
2026-06-06
20:30:07 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:tone | arm-none-eabi-ld: /github/workspace/sources/nuttx/arch/arm/src/board/libboard.a(stm32_bringup.o): in function `stm32_bringup':
make[1]: *** [Makefile:230: nuttx] Error 1
make: *** [tools/Unix.mk:569: nuttx] Error 2
make: Target 'all' not remade because of errors. |
2026-06-06
20:20:12 | 19050:
tools/nxstyle:
Whitelist lifecycle_msgs GetState/S | stm32f103-minimum
:adb | ed |
2026-06-06
20:01:31 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f103-minimum
:adb | n t
D l oDaldo a dU p lUopaldo a d T o tTaolt a l S p eSnpte n t L e fLte f tS p eSepde
ed |
2026-06-06
19:27:58 | 19049:
fs/vfs:
inherit ownership in pseudofile_create | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-06
19:15:51 | 19049:
fs/vfs:
inherit ownership in pseudofile_create | esp32p4-function-ev-board
:pwm | (Same) |
2026-06-06
18:57:50 | 19050:
tools/nxstyle:
Whitelist lifecycle_msgs GetState/S | sim
:lua | D l o aTdi m eU p lCouardrent |
2026-06-06
18:42:27 | 19049:
fs/vfs:
inherit ownership in pseudofile_create | stm32f103-minimum
:adb | p e e d Ti m e T i m e T i m e C u r rDelnota
d U p l o a d T o t a l S p e n t L e f tD l oSapde e dU
plo
a d 0 T o t 0a l 0S p e n t0 0L e f t 0S p e e d |
2026-06-06
18:36:59 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | sim
:lua | T i m e C u r r e n t
D l o a d U p l o a d T oDtlaola d SUppelnota d LTeoftta l S p eSepde
nt
L0e ft S p0e e d |
2026-06-06
17:48:46 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | sim
:lua | T i m e T i m e C u r r e n t
D l o a d U p l o a d T o t a l S p eDnlto a d LUepflto a dS p e eTdo
tal
S p0e n t 0 L e f t0 S p e e0d |
2026-06-06
17:46:25 | 19049:
fs/vfs:
inherit ownership in pseudofile_create | sim
:tflm | CMake Error at /github/workspace/sources/nuttx/build/_deps/tflite_micro_fetch-subbuild/tflite_micro_fetch-populate-prefix/src/tflite_micro_fetch-populate-stamp/download-tflite_micro_fetch-populate.cmake:170 (message):
Each download failed!
error: downloading 'https://github.com/tensorflow/tflite-micro/archive/cfa4c91d1b36c37c7c104b9c664615e59f1abfe3.zip' failed
status_code: 22
status_string: "HTTP response code said error"
log:
--- LOG BEGIN ---
Trying 140.82.116.3:443...
Connected |
2026-06-06
17:30:56 | 19049:
fs/vfs:
inherit ownership in pseudofile_create | esp32-lyrat
:rtptools | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:76: argtable3] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/system/argtable3_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
mak |
2026-06-06
17:30:18 | 19049:
fs/vfs:
inherit ownership in pseudofile_create | imx93-qsb
:rpmsg | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of libmetal.zip or
libmetal.zip.zip, and cannot find libmetal.zip.ZIP, period.
make[1]: *** [libmetal.defs:83: libmetal.zip] Error 9
make[1]: Target 'context' not remade because of errors.
make: * |
2026-06-06
17:11:43 | 19049:
fs/vfs:
inherit ownership in pseudofile_create | sim
:lua | % R e c e i v e d % X f e r d A v e r a g e S p e e dD l o aTdi m eU p l o aTdi m e T o t a lT i m eS p eCnutr r e n tL
e f t S p e e d |
2026-06-06
13:49:27 | 18902:
fs/vfs:
add parent-directory permission checks for | esp32s3-devkit
:oneshot | Killing pytest after timeout... |
2026-06-06
13:36:08 | 18902:
fs/vfs:
add parent-directory permission checks for | esp32p4-function-ev-board
:ulp | (Same) |
2026-06-06
13:04:03 | 18902:
fs/vfs:
add parent-directory permission checks for | stm32f103-minimum
:adb | t
DDlloaoda d Up lUopaldo a d T o t aTlo t a lS p e ntS p e nLte fLte f tS p eSepde
ed |
2026-06-06
11:31:23 | 18902:
fs/vfs:
add parent-directory permission checks for | sim
:lua | e T i m e Current |
2026-06-06
10:19:57 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | esp32s3-devkit
:fastboot | Killing pytest after timeout... |
2026-06-06
10:10:50 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | esp32p4-function-ev-board
:i2schar | (Same) |
2026-06-06
09:44:05 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | stm32f103-minimum
:adb | d |
2026-06-06
08:09:43 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:lua | C u r r e n t
D l oa d U p lDolaoda d TUoptlaola d S pTeontta l L eSfpte n tS p e e dL
eft
S p0e e d |
2026-06-06
05:56:47 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-06
05:43:52 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | esp32s3-devkit
:fastboot_tcp | 10 |
2026-06-06
05:38:47 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | esp32p4-function-ev-board
:gpio | Killing pytest after timeout... |
2026-06-06
05:30:12 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | esp32s3-devkit
:txtable | - - 0- - : - - :0- - - -0: - - : - -0 00 |
2026-06-06
05:11:06 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | stm32f103-minimum
:adb | DDlolaoda d U p lUopaldo a d T o tTaolt a l S p eSnpte n t L e fLte f tS p eSepde
ed |
2026-06-06
00:02:45 | 18831:
boards/xtensa:
heltec_wifi_lora_32:
Add userleds s | esp32s3-devkit
:usbnsh | Killing pytest after timeout... |
2026-06-05
22:43:30 | 18831:
boards/xtensa:
heltec_wifi_lora_32:
Add userleds s | lckfb-szpi-esp32s3
:txtable | Total Spent Left Speed |
2026-06-05
22:07:34 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32p4-function-ev-board
:gpio | Killing pytest after timeout... |
2026-06-05
22:05:40 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | flipperzero
:nsh | In file included from /github/workspace/sources/nuttx/arch/arm/src/common/stm32/hardware/stm32_tim.h:45,
from /github/workspace/sources/nuttx/arch/arm/src/common/stm32/stm32_tim.h:43,
from board/stm32_boot.c:43:
##[error]/github/workspace/sources/nuttx/arch/arm/src/common/stm32/hardware/stm32_tim_v1v2.h:212:5: error: "STM32_NGTIM" is not defined, evaluates to 0 [-Werror=undef]
212 | #if STM32_NGTIM > 0
| ^~~~~~~~~~~
##[error]/github/workspace/sources/nuttx/arch/arm/src/common/stm32/h |
2026-06-05
22:04:09 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | nucleo-f746zg
:note | board/stm32_qencoder.c:37:10: fatal error: 'stm32_qencoder.h' file not found
37 | #include "stm32_qencoder.h"
| ^~~~~~~~~~~~~~~~~~
1 error generated.
ERROR: clang failed: 1
command: clang -MT ./stm32_qencoder.o -M '-Wno-atomic-alignment' '-Wstrict-prototypes' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-atomic-alignment' '-Wstrict-prototypes' '-Wno-attributes' '-Wno-unknown-pragmas' '-fomit-frame-pointer' '-fno-builtin' '-fshort-enums' '-fno-common' '-Wall' '-Wshadow' '-Wundef' |
2026-06-05
22:03:22 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | nucleo-f746zg
:pysim | (Unknown) |
2026-06-05
21:58:31 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:qencoder | board/stm32_qencoder.c:38:10: fatal error: stm32_qencoder.h: No such file or directory
38 | #include "stm32_qencoder.h"
| ^~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: arm-none-eabi-gcc failed: 1
command: arm-none-eabi-gcc -MT ./stm32_qencoder.o -M '-Wstrict-prototypes' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Wstrict-prototypes' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-fomit-frame-pointer' '--param=min-pagesize=0' '-fno-common' '-Wall' '-Wshadow' |
2026-06-05
21:56:22 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | linum-stm32h753bi
:tone | common/stm32/stm32_tim.c: In function 'stm32_tim_setmode':
##[error]common/stm32/stm32_tim.c:704:5: error: "STM32_NBTIM" is not defined, evaluates to 0 [-Werror=undef]
704 | #if STM32_NBTIM > 0
| ^~~~~~~~~~~
##[error]common/stm32/stm32_tim.c:707:5: error: "STM32_NBTIM" is not defined, evaluates to 0 [-Werror=undef]
707 | #if STM32_NBTIM > 1
| ^~~~~~~~~~~
##[error]common/stm32/stm32_tim.c:710:5: error: "STM32_NBTIM" is not defined, evaluates to 0 [-Werror=undef]
710 | #i |
2026-06-05
21:42:13 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | nucleo-l432kc
:wgen | chip/stm32l4_dac.c: In function 'dac_send':
##[error]chip/stm32l4_dac.c:870:23: error: 'STM32_GTIM_EGR_OFFSET' undeclared (first use in this function); did you mean 'STM32_EXTI_EMR_OFFSET'?
870 | tim_modifyreg(chan, STM32_GTIM_EGR_OFFSET, 0, GTIM_EGR_UG);
| ^~~~~~~~~~~~~~~~~~~~~
| STM32_EXTI_EMR_OFFSET
chip/stm32l4_dac.c:870:23: note: each undeclared identifier is reported only once for each function it appears in
##[error]chip/stm32l4_dac.c:87 |
2026-06-05
21:32:08 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | nucleo-g431rb
:qenco | (Unknown) |
2026-06-05
21:20:28 | 18902:
fs/vfs:
add parent-directory permission checks for | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-05
21:07:58 | 18902:
fs/vfs:
add parent-directory permission checks for | esp32p4-function-ev-board
:pwm | (Same) |
2026-06-05
20:42:15 | 3528:
workflows/build.yml:
Fix Skipping sim\windows in t | esp32s3-devkit
:oneshot | (Same) |
2026-06-05
20:31:59 | 3528:
workflows/build.yml:
Fix Skipping sim\windows in t | esp32p4-function-ev-board
:ulp | (Same) |
2026-06-05
20:07:56 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | sim
:matter | (Unknown) |
2026-06-05
20:02:41 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | sim
:lua | % T o %t% a TlTo ot ta al l % R e %c% e RiRevececedei iv%ve edXd f %% XXffeerrdd AAvveerraaggee SSppeeeedd Time Time Time Current
T i m e T i m e T i m e C u r r e nDtl
o a d Upload Total Spent Left Speed
- |
2026-06-05
20:01:07 | 3528:
workflows/build.yml:
Fix Skipping sim\windows in t | stm32f103-minimum
:adb | %
T o t0al % 0R e c e i0v e d %0 X f e r0d A v0e r a g e 0S p e e d 0 -T-i:-m-e: - - -T-i:m-e- : - - --T:i-m-e: -- C u r r e0nt |
2026-06-05
19:18:59 | 3528:
workflows/build.yml:
Fix Skipping sim\windows in t | lckfb-szpi-esp32s3
:es7210 | Dlo % Total % Received % Xferd Average Speed Time Time Time Current |
2026-06-05
18:56:56 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | nucleo-l432kc
:wgen | chip/stm32l4_dac.c: In function 'dac_send':
##[error]chip/stm32l4_dac.c:870:23: error: 'STM32_GTIM_EGR_OFFSET' undeclared (first use in this function); did you mean 'STM32_EXTI_EMR_OFFSET'?
870 | tim_modifyreg(chan, STM32_GTIM_EGR_OFFSET, 0, GTIM_EGR_UG);
| ^~~~~~~~~~~~~~~~~~~~~
| STM32_EXTI_EMR_OFFSET
chip/stm32l4_dac.c:870:23: note: each undeclared identifier is reported only once for each function it appears in
##[error]chip/stm32l4_dac.c:87 |
2026-06-05
18:40:23 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm3210e-eval
:pm | In file included from board/stm32_lcd.c:65:
board/stm32_lcd.c: In function 'stm3210e_setpower':
##[error]board/stm32_lcd.c:1046:32: error: 'STM32_TIM1_CCR1' undeclared (first use in this function); did you mean 'STM32_DMA1_CCR1'?
1046 | putreg16((uint16_t)duty, STM32_TIM1_CCR1);
| ^~~~~~~~~~~~~~~
129 | #define putreg16(v,a) (*(volatile uint16_t *)(a) = (v))
| ^
board/stm32_lcd.c:1046:32: note: each unde |
2026-06-05
18:29:32 | 3528:
workflows/build.yml:
Fix Skipping sim\windows in t | sim
:lua | - : -0- :- - 0 0 0 0 0 0 0 0 - |
2026-06-05
18:27:50 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | hymini-stm32v
:nsh2 | In file included from board/stm32_ssd1289.c:43:
board/stm32_ssd1289.c: In function 'stm32_backlight':
##[error]board/stm32_ssd1289.c:254:32: error: 'STM32_TIM3_CCR2' undeclared (first use in this function); did you mean 'STM32_FSMC_ECCR2'?
254 | putreg16((uint16_t)duty, STM32_TIM3_CCR2);
| ^~~~~~~~~~~~~~~
129 | #define putreg16(v,a) (*(volatile uint16_t *)(a) = (v))
| ^
board/stm32_ssd1289.c:254:32: not |
2026-06-05
18:27:02 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-05
18:25:40 | 3527:
system/uorb:
fix listener_top not showing topic da | esp32s3-devkit
:toywasm | (Same) |
2026-06-05
18:17:13 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | esp32p4-function-ev-board
:ulp | (Same) |
2026-06-05
18:10:58 | 3527:
system/uorb:
fix listener_top not showing topic da | esp32p4-function-ev-board
:watchdog | (Same) |
2026-06-05
17:16:19 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | sim
:lua | % %%T oTTtooattlaa ll % %%R eRRceeeccieeviievvdee dd% %%X fXXeffreedrrdd AAvveerraaggee SSppeeeedd TTiimmee Time Time Current
% T o Time Time Current
D l o a d Upload Total Spent Left Speed |
2026-06-05
16:53:14 | 19047:
video/fb:
Trigger updatearea() if CONFIG_FB_UPDATE | esp32p4-function-ev-board
:ulp | Killing pytest after timeout... |
2026-06-05
16:10:29 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | sim
:lua | 0 % Total % Received % Xferd Ave ra g e Speed Time Time Time Current |
2026-06-05
16:10:17 | 19047:
video/fb:
Trigger updatearea() if CONFIG_FB_UPDATE | stm32f103-minimum
:adb | D l oaDdl o Uapdl o aUdp l o aTdo t a lT o t aSlp e n tS p e n tL e f t L eSfpte e dS
pee
d |
2026-06-05
16:01:04 | 19048:
boards/sim/sim/sim/nsh:
enable CONFIG_RTC for host | sim
:lua | u r r e n t
D l o a d DUlpolaoda d U p lTooatda l T o tSaple n t S p e nLte f t LSepfete d
Spe
e d
T i m e T i m e T i m e C u r r e n t
D lo a d U p l o a d T o t a l S p e n t DLleofatd SUppeleoda
d
T o t0a l S0p e n t 0 L e f0t S p0 0 e e d |
2026-06-05
15:55:08 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32p4-function-ev-board
:timers | Killing pytest after timeout... |
2026-06-05
15:33:31 | 3527:
system/uorb:
fix listener_top not showing topic da | esp32s3-devkit
:toywasm | (Same) |
2026-06-05
15:21:56 | 3527:
system/uorb:
fix listener_top not showing topic da | esp32p4-function-ev-board
:gpio | (Same) |
2026-06-05
15:20:39 | 19048:
boards/sim/sim/sim/nsh:
enable CONFIG_RTC for host | sim
:lua | Time
0 T i m e 0 C u r r0e n t |
2026-06-05
14:48:03 | 19047:
video/fb:
Trigger updatearea() if CONFIG_FB_UPDATE | sim
:lua | t
e d |
2026-06-05
14:44:59 | 3527:
system/uorb:
fix listener_top not showing topic da | stm32f103-minimum
:adb | d |
2026-06-05
14:41:41 | 3526:
examples/sotest:
support packaged shared library f | esp32s3-devkit
:pwm | Killing pytest after timeout... |
2026-06-05
14:40:09 | 19047:
video/fb:
Trigger updatearea() if CONFIG_FB_UPDATE | nucleo-l152re
:nsh | [1/7] /bin/sh libs/libc/misc/CMakeFiles/always_rebuild_lib_utsname-983c8ec.sh 3863f055c2debf59
[2/7] Linking C static library apps/system/nsh/libapps_nsh.a
[3/7] Building C object arch/arm/src/common/CMakeFiles/STARTUP_OBJS.dir/crt0.c.o
[4/7] Linking C executable nuttx
Memory region Used Size Region Size %age Used
flash: 62372 B 512 KB 11.90%
sram: 3752 B 80 KB 4.58%
[5/7] Generating nuttx.hex
[6/7] Generating nuttx.bin
[7/7] Generating |
2026-06-05
14:28:29 | 3526:
examples/sotest:
support packaged shared library f | esp32p4-function-ev-board
:watchdog | Killing pytest after timeout... |
2026-06-05
14:23:22 | 3527:
system/uorb:
fix listener_top not showing topic da | lckfb-szpi-esp32s3
:fastboot_tcp | 0 % Total % Received % Xferd Average Speed Time Time Time Current |
2026-06-05
14:15:16 | 19048:
boards/sim/sim/sim/nsh:
enable CONFIG_RTC for host | sim
:lua | % %%T oTTtooattlaa ll % %R% e RcReeeciceveieivdve ed%d %X fXefrde r dA v eArvaegrea gSep eSepde e d T i mTei m Time Time Currenet
T i m e T i m e C u r r e n t
D l o a d U p l o a d T o t al Spent L e fDtl o adS p eUepdl
oad
a l D l oSapde n tU p l o aLde f t T oStpaele d
Spe
n t 0 L e f0t S p0e e d |
2026-06-05
13:51:23 | 19047:
video/fb:
Trigger updatearea() if CONFIG_FB_UPDATE | sim
:lua | Dloa d %U Tpoltoaal d %T Roetcaeliv e d S%p eXfnetr d A vLeerftage Speed Time Time Time Current |
2026-06-05
13:26:49 | 19047:
video/fb:
Trigger updatearea() if CONFIG_FB_UPDATE | qemu-i486
:vga_fb | video/fb.c: In function 'fb_register_device':
##[error]video/fb.c:1940:20: error: unused variable 'area' [-Werror=unused-variable]
1940 | struct fb_area_s area;
| ^~~~
cc1: all warnings being treated as errors
make[1]: *** [Makefile:108: fb.o] Error 1
make[1]: Target 'libdrivers.a' not remade because of errors.
make: *** [tools/LibTargets.mk:107: drivers/libdrivers.a] Error 2
make: Target 'all' not remade because of errors. |
2026-06-05
13:25:22 | 19047:
video/fb:
Trigger updatearea() if CONFIG_FB_UPDATE | pinephone
:lvgl | (Same) |
2026-06-05
13:24:58 | 19047:
video/fb:
Trigger updatearea() if CONFIG_FB_UPDATE | ttgo_eink5_v2
:fb | (Same) |
2026-06-05
13:24:58 | 19047:
video/fb:
Trigger updatearea() if CONFIG_FB_UPDATE | pinephone
:lcd | (Same) |
2026-06-05
13:17:37 | 3527:
system/uorb:
fix listener_top not showing topic da | sim
:lua | d |
2026-06-05
13:12:00 | 19047:
video/fb:
Trigger updatearea() if CONFIG_FB_UPDATE | sim
:lua | t a l % R e c e i v e d % X f e r d A v e r aDgleo aSdp e eUdp l o aTdi m e T o t aTli m e S pe n t T i m eL e fCtu r rSepnte
e d |
2026-06-05
13:10:05 | 19047:
video/fb:
Trigger updatearea() if CONFIG_FB_UPDATE | ttgo_t_display_esp32
:lvgl_fb | video/fb.c: In function 'fb_register_device':
##[error]video/fb.c:1940:20: error: unused variable 'area' [-Werror=unused-variable]
1940 | struct fb_area_s area;
| ^~~~
cc1: all warnings being treated as errors
make[1]: *** [Makefile:108: fb.o] Error 1
make[1]: Target 'libdrivers.a' not remade because of errors.
make: *** [tools/LibTargets.mk:107: drivers/libdrivers.a] Error 2
make: Target 'all' not remade because of errors. |
2026-06-05
12:48:22 | 3525:
lte:
make lte_initialize() build without the ALT12 | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-05
12:24:11 | 3526:
examples/sotest:
support packaged shared library f | sim
:lua | S p e n t L e f t S p e e d
0 D0l o a d 0 U p l o a0d T0o t a l 0 S p e n t 0 L e f t0 -S-p:e-e-d:
-- |
2026-06-05
12:23:37 | 19044:
include/nuttx/semaphore.h:
parenthesize NXSEM help | esp32s3-devkit
:oneshot | Killing pytest after timeout... |
2026-06-05
12:21:19 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32p4-function-ev-board
:ulp | (Same) |
2026-06-05
12:17:52 | 19044:
include/nuttx/semaphore.h:
parenthesize NXSEM help | esp32p4-function-ev-board
:pwm | (Same) |
2026-06-05
11:11:05 | 19044:
include/nuttx/semaphore.h:
parenthesize NXSEM help | rv-virt
:kfb64 | /github/workspace/sources/apps/bin/stRMOiEJ: section .fini_array lma 0xc0101009 adjusted to 0xc010100c |
2026-06-05
10:51:39 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:pktradio | CMake Error at mm/kasan/CMakeLists.txt:37 (target_compile_options):
Cannot specify compile options for target "kmm" which is not built by this
project.
CMake Error at mm/kasan/CMakeLists.txt:37 (target_compile_options):
Cannot specify compile options for target "kmm" which is not built by this
project.
ninja: error: loading 'build.ninja': No such file or directory
ninja: error: loading 'build.ninja': No such file or directory
cp: cannot stat 'nuttx': No such file or directory
|
2026-06-05
10:51:32 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:pf_ieee802154 | (Same) |
2026-06-05
10:51:24 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:ostest_oneholder | (Same) |
2026-06-05
10:51:17 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:ostest | (Same) |
2026-06-05
10:51:05 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:nxffs | (Same) |
2026-06-05
10:47:31 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:nsh | (Same) |
2026-06-05
10:47:23 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:note | (Same) |
2026-06-05
10:46:24 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:nettest | (Same) |
2026-06-05
10:45:44 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:mtdrwb | (Same) |
2026-06-05
10:45:36 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:mtdpart | (Same) |
2026-06-05
10:45:28 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:mount | (Same) |
2026-06-05
10:42:39 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sabre-6quad
:smp | CMake Error at mm/kasan/CMakeLists.txt:37 (target_compile_options):
Cannot specify compile options for target "kmm" which is not built by this
project.
CMake Error at mm/kasan/CMakeLists.txt:37 (target_compile_options):
Cannot specify compile options for target "kmm" which is not built by this
project.
ninja: error: loading 'build.ninja': No such file or directory
ninja: error: loading 'build.ninja': No such file or directory
cp: cannot stat 'nuttx.hex': No such file or directory |
2026-06-05
10:42:03 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:minibasic | CMake Error at mm/kasan/CMakeLists.txt:37 (target_compile_options):
Cannot specify compile options for target "kmm" which is not built by this
project.
CMake Error at mm/kasan/CMakeLists.txt:37 (target_compile_options):
Cannot specify compile options for target "kmm" which is not built by this
project.
ninja: error: loading 'build.ninja': No such file or directory
ninja: error: loading 'build.ninja': No such file or directory
cp: cannot stat 'nuttx': No such file or directory
|
2026-06-05
10:41:34 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:matter | (Same) |
2026-06-05
10:36:10 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:linuxspi | (Same) |
2026-06-05
10:36:01 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:linuxi2c | (Same) |
2026-06-05
10:34:22 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:ipforward | (Same) |
2026-06-05
10:34:14 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:foc | (Same) |
2026-06-05
10:34:05 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:fb | (Same) |
2026-06-05
10:33:26 | 3525:
lte:
make lte_initialize() build without the ALT12 | sim
:lua | 0 e r d 0 A v e0r a g e S0p e e d 0 T i m e0 T i m0e T0i m-e- : -C-u:r-r-e n-t-
: - - : - - - - : - - : - - 0 % Total % Rece i v e d % X f e r d ADvleoraadg e USppleoeadd TTiomtea l TSipmeen t TLiemfet CSuprereedn
t |
2026-06-05
10:33:21 | 19045:
arch/nrf91:
fix broken modem initialization | stm32f103-minimum
:adb | peed |
2026-06-05
10:33:19 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:dynconns | CMake Error at mm/kasan/CMakeLists.txt:37 (target_compile_options):
Cannot specify compile options for target "kmm" which is not built by this
project.
CMake Error at mm/kasan/CMakeLists.txt:37 (target_compile_options):
Cannot specify compile options for target "kmm" which is not built by this
project.
ninja: error: loading 'build.ninja': No such file or directory
ninja: error: loading 'build.ninja': No such file or directory
cp: cannot stat 'nuttx': No such file or directory
|
2026-06-05
10:32:44 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:bthcisock | (Same) |
2026-06-05
10:32:37 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:bluetooth | (Same) |
2026-06-05
10:32:07 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | esp32-c3-zero
:jumbo | CMake Error at mm/kasan/CMakeLists.txt:37 (target_compile_options):
Cannot specify compile options for target "kmm" which is not built by this
project.
CMake Error at mm/kasan/CMakeLists.txt:37 (target_compile_options):
Cannot specify compile options for target "kmm" which is not built by this
project.
ninja: error: loading 'build.ninja': No such file or directory
ninja: error: loading 'build.ninja': No such file or directory
cp: cannot stat 'nuttx.hex': No such file or directory |
2026-06-05
10:31:38 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | esp32-c3-zero
:wifi | (Same) |
2026-06-05
10:31:29 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | esp32-c3-zero
:usbnsh | (Same) |
2026-06-05
10:30:24 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | sim
:alsa | CMake Error at mm/kasan/CMakeLists.txt:37 (target_compile_options):
Cannot specify compile options for target "kmm" which is not built by this
project.
CMake Error at mm/kasan/CMakeLists.txt:37 (target_compile_options):
Cannot specify compile options for target "kmm" which is not built by this
project.
ninja: error: loading 'build.ninja': No such file or directory
ninja: error: loading 'build.ninja': No such file or directory
cp: cannot stat 'nuttx': No such file or directory
|
2026-06-05
10:30:03 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | esp32-c3-zero
:sta_softap | CMake Error at mm/kasan/CMakeLists.txt:37 (target_compile_options):
Cannot specify compile options for target "kmm" which is not built by this
project.
CMake Error at mm/kasan/CMakeLists.txt:37 (target_compile_options):
Cannot specify compile options for target "kmm" which is not built by this
project.
ninja: error: loading 'build.ninja': No such file or directory
ninja: error: loading 'build.ninja': No such file or directory
cp: cannot stat 'nuttx.hex': No such file or directory |
2026-06-05
10:27:53 | 19043:
mm/kasan:
Fix compile options applied to wrong tar | nucleo-l152re
:nsh | (Same) |
2026-06-05
04:56:44 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | esp32s3-devkit
:oneshot | Killing pytest after timeout... |
2026-06-05
04:36:29 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | esp32p4-function-ev-board
:pwm | (Same) |
2026-06-05
04:06:50 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | stm32f103-minimum
:adb | D l o a d D lUopaldo a dU p l oTaodt a l T o tSaple n t S p e nLte f t LSepfeetd
Sp
e e d0 |
2026-06-05
02:36:14 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | esp32-ethernet-kit
:wifi | 0 % Total % Received % Xferd Average Speed Time Time Time Current |
2026-06-05
01:05:56 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32p4-function-ev-board
:qencoder | Killing pytest after timeout... |
2026-06-05
00:59:10 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | esp32s3-devkit
:gpio | (Same) |
2026-06-05
00:46:14 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | esp32p4-function-ev-board
:i2schar | (Same) |
2026-06-04
23:59:57 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | stm32f103-minimum
:adb | DDllooaad d U plUopaldo a d T o tTaolt a l S p eSnpte n t L e fLte f tS p eSepde
ed |
2026-06-04
23:51:42 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | lckfb-szpi-esp32s3
:adb | -1-0:0- -1:6-4-6 k- - :1-0-0: -1-6 46-k- : - - :0- - 1 8 20k |
2026-06-04
22:42:12 | 3524:
system/uorb:
Show listener data without CONFIG_DEB | sim
:lua | % Received % Xferd Average Speed Tim e T i m e T i mDleo a dC u rUrpelnota
d T o t a l S p e n t L e f t S p e e d
Dloa
d 0U p l o a d0 0T o t a l 0 S p e0n t 0L e f t S0p e e d |
2026-06-04
22:34:12 | 19041:
arch:
add TriCore architecture and Infineon AURIX | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-04
22:22:54 | 19041:
arch:
add TriCore architecture and Infineon AURIX | esp32p4-function-ev-board
:gpio | (Same) |
2026-06-04
21:49:17 | 19041:
arch:
add TriCore architecture and Infineon AURIX | stm32f103-minimum
:adb | u r r e n t
D lo a d U p l o aDdl o a dT o tUapll o a dS p e nTto t a l L e fStp e nStp e e d
Left
S0p e e d |
2026-06-04
20:33:04 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32p4-function-ev-board
:ulp | Killing pytest after timeout... |
2026-06-04
20:20:11 | 19041:
arch:
add TriCore architecture and Infineon AURIX | sim
:lua | d
: - - : -D-l oa-d- : -U-p:lo-a-d T o0tal Spent Left Speed |
2026-06-04
18:33:03 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-04
18:24:33 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | stm32f103-minimum
:adb | DDllooaadd UUplpolaoda d T oTtoatla l S pSepnetn t L eLfetf t S pSepeede
d |
2026-06-04
18:16:40 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32p4-function-ev-board
:ulp | Killing pytest after timeout... |
2026-06-04
17:41:15 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | stm32f103-minimum
:adb | DDllooaadd UUppllooaadd ToTtoatla l S pSepnet n t Le f tL eft SSppeeeedd |
2026-06-04
16:54:53 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | sim
:lua | : R- e- c e- i- :v -e -d : -% - X f e r d 0 A v e r a g e Speed Time Time Time Current
al
S0p e n t 0 L e f0t S p e0e d |
2026-06-04
16:13:52 | 19040:
arch/arm/gd32f4:
fix NULL pointer dereference in a | stm32f103-minimum
:adb | T i m e C u r r e n t
D l o a d U p l o a d T oDtlaolad USppleonadt T o tLael f t S pSepnete d
L
e f t0 S p e e0d |
2026-06-04
16:13:15 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | sim
:lua | T0i m e C0u r r e n0t
S p0e nt 0L e f t 0 S p e e d0 |
2026-06-04
15:58:13 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-04
15:46:40 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32p4-function-ev-board
:tickless | (Same) |
2026-06-04
15:17:00 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | stm32f103-minimum
:adb | d |
2026-06-04
14:14:56 | 3523:
system/nxinit:
skip empty lines in init.rc parser | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-04
14:05:43 | 3523:
system/nxinit:
skip empty lines in init.rc parser | esp32p4-function-ev-board
:pm | (Same) |
2026-06-04
13:50:36 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | sabre-6quad
:netnsh | --:- |
2026-06-04
13:40:54 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | sim
:lua | 0 v0e r a g e0 S p e e d0 T i0m e Time Time Current |
2026-06-04
11:56:52 | 19039:
drivers/video:
add HWCURSOR related config | esp32s3-devkit
:adb | Killing pytest after timeout... |
2026-06-04
11:35:17 | 19039:
drivers/video:
add HWCURSOR related config | esp32p4-function-ev-board
:pwm | (Same) |
2026-06-04
11:16:08 | 19039:
drivers/video:
add HWCURSOR related config | stm32f103-minimum
:adb | DDllooaadd UUppllooaadd T oTtoatla l S p eSnpte n t L e fLte f tS p eSepd
eed |
2026-06-04
11:12:57 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | sim
:lua | % %T oTtoatla l % %R eRceecievievde d% %X fXefrerd Average Speed Time Time Time Current
c e i v e d % X f e r d A v e r a g e S p e e d T ime Time TDimleo a dC u rUrpelnota
d T o t a l S p e n t L e f t S p e e d
Dl o%a dT
o tU ap0ll o a d %0 TR oe t a0l S p0e n t 0 c Le ei fv te0 d S% p eX ef de0
r d A
v e 0r0 a -g -e : -S -p0:e -e -d - 0- :T -i -m :e - 0- - -T :i0-m -e : - - 0 |
2026-06-04
10:22:01 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32s3-devkit
:oneshot | Killing pytest after timeout... |
2026-06-04
10:21:34 | 19038:
drivers/mmcsd/mmcsd_sdio.c:
guard SDIO_REGISTERCAL | esp32s3-devkit
:blewifi | (Same) |
2026-06-04
10:16:50 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32p4-function-ev-board
:ulp | (Same) |
2026-06-04
10:06:16 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | stm32f103-minimum
:adb | t
D lDolaoda d U pUlpolaoda d T oTtaolt a l S p eSnpte n t L e fLte f tS p eSepdee
d |
2026-06-04
10:01:34 | 19038:
drivers/mmcsd/mmcsd_sdio.c:
guard SDIO_REGISTERCAL | esp32p4-function-ev-board
:qencoder | Killing pytest after timeout... |
2026-06-04
09:41:51 | 3523:
system/nxinit:
skip empty lines in init.rc parser | qemu-armv8a
:fastboot | 76d75
< CONFIG_PIPES=y
Saving the new configuration file |
2026-06-04
08:50:19 | 19039:
drivers/video:
add HWCURSOR related config | sim
:lua | Current
e 0C u r r e n0t |
2026-06-04
08:48:25 | 3523:
system/nxinit:
skip empty lines in init.rc parser | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvveeerrraaagggeee SSSpppeeeeeeddd TTTiiimmmeee TTTiiimmmeee TTTiiimmmeee CCCuuurrrrrreeennnttt
DDDllloooaaaddd UUUpppllloooaaaddd TTToootttaaalll SSSpppeeenntnt t LL eeLffettf t SS ppeSeepeded
e
d |
2026-06-04
07:50:01 | 19038:
drivers/mmcsd/mmcsd_sdio.c:
guard SDIO_REGISTERCAL | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %% XXffeerdr d A vAevreargaeg eSp eSepde e dT i m eT i m eT i m e T i m e Ti m e Time Current
T
i m e0 C u r r e0n t |
2026-06-04
07:21:18 | 3522:
apps/rust:
Add dependencies for Rust cargo in make | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-04
07:19:56 | 3523:
system/nxinit:
skip empty lines in init.rc parser | sim
:sqlite | 47d46
< CONFIG_PIPES=y
Saving the new configuration file |
2026-06-04
07:07:36 | 3522:
apps/rust:
Add dependencies for Rust cargo in make | esp32p4-function-ev-board
:timers | Killing pytest after timeout... |
2026-06-04
06:39:31 | 3523:
system/nxinit:
skip empty lines in init.rc parser | sim
:lua | % T o%t aTlo t a l % R e%c eRievceed % Xferd Average S % Total % Received % Xferd Average Speed Time Time Time Current
S p e e d
i
v e 0 d % X f 0 e r d 0 A v e r a g0e S p e e0d T i0m e 0T i m e 0 - - T: i-Dm-le:o -a-d - -Up:l-o-a:d- - -T-o:t-a-l: - - S p e n t 0 Left Speed |
2026-06-04
05:17:13 | 19037:
arch/sim:
Add dependencies for Rust cargo in make | sim
:module | make[1]: *** No rule to make target '-ltest', needed by 'nuttx'.
make[1]: Target 'nuttx' not remade because of errors.
make: *** [tools/Unix.mk:569: nuttx] Error 2
make: Target 'all' not remade because of errors. |
2026-06-04
05:04:26 | 3522:
apps/rust:
Add dependencies for Rust cargo in make | sim
:lua | al % Receiv ed % X f e r d A veDrlaogaed S pUepeldo a d T i mTeo t a l T i mSep e n t Left Speed |
2026-06-04
05:03:47 | 19037:
arch/sim:
Add dependencies for Rust cargo in make | sim
:lua | C u r r e n t
D l o a d U p l o a d D l o aTodt a lU pl o aSdpe n tT o t a lLe f t S p eSnpt e e d
Left
S p0e e d |
2026-06-04
03:39:52 | 19029:
cmake/nuttx_toolchain.cmake:
track preprocessed in | esp32s3-devkit
:oneshot | Killing pytest after timeout... |
2026-06-04
02:49:11 | 19029:
cmake/nuttx_toolchain.cmake:
track preprocessed in | stm32f103-minimum
:adb | T i m e T i m e C u r r e n t
D l o a d U p l o a d T o t a l Spent Lef tD l oSapde e dU
plo
ad 0 T o t a l0 S p0e n t 0 L e f t0 S p e e0d |
2026-06-04
02:07:52 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:ulp | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-04
02:07:29 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:watchdog | (Same) |
2026-06-04
02:07:07 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:nsh | (Same) |
2026-06-04
02:06:44 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:pm | (Same) |
2026-06-04
02:06:20 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:i2c | (Same) |
2026-06-04
02:05:57 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:i2schar | In file included from ./common/espressif/esp_i2s.c:53:
11 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./esp_i2s.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sections' '-fdata-sections' '-nostdlib' '-march=rv32imac_zicsr_zifencei' '-mabi= |
2026-06-04
02:05:33 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:spi | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-04
02:05:09 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:autopm | (Same) |
2026-06-04
02:04:46 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:adc | (Same) |
2026-06-04
02:04:22 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:motor | (Same) |
2026-06-04
02:03:59 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:random | (Same) |
2026-06-04
02:03:35 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:capture | (Same) |
2026-06-04
02:03:12 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:twai | (Same) |
2026-06-04
02:02:49 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:analog_cmpr | (Same) |
2026-06-04
02:02:26 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:spislv | (Same) |
2026-06-04
02:02:03 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:crypto | (Same) |
2026-06-04
02:01:40 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:sdm | (Same) |
2026-06-04
02:01:17 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:temperature_sensor | (Same) |
2026-06-04
02:00:54 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:rtc | (Same) |
2026-06-04
02:00:32 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:efuse | (Same) |
2026-06-04
02:00:10 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:bmp180 | (Same) |
2026-06-04
01:59:48 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:ostest | (Same) |
2026-06-04
01:59:26 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-function-ev-board
:buttons | (Same) |
2026-06-04
01:59:04 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-pico-wifi-wareshare
:spiflash | (Same) |
2026-06-04
01:58:42 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32p4-pico-wifi-wareshare
:nsh | (Same) |
2026-06-04
01:58:21 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:usbconsole | (Same) |
2026-06-04
01:58:01 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:spiflash | (Same) |
2026-06-04
01:57:40 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:rmt | (Same) |
2026-06-04
01:57:20 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:tickless | (Same) |
2026-06-04
01:56:59 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:qencoder | (Same) |
2026-06-04
01:56:38 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:gpio | (Same) |
2026-06-04
01:56:17 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:timers | (Same) |
2026-06-04
01:55:57 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:pwm | (Same) |
2026-06-04
01:55:36 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:watchdog | (Same) |
2026-06-04
01:55:15 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:nsh | (Same) |
2026-06-04
01:54:54 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:pm | (Same) |
2026-06-04
01:54:32 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:i2c | (Same) |
2026-06-04
01:54:12 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:i2schar | In file included from ./common/espressif/esp_i2s.c:53:
11 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./esp_i2s.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sections' '-fdata-sections' '-nostdlib' '-march=rv32imc_zicsr_zifencei' '-mabi=i |
2026-06-04
01:53:51 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:spi | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-04
01:53:31 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:sdmmc_spi | (Same) |
2026-06-04
01:53:09 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:ble | (Same) |
2026-06-04
01:52:48 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:autopm | (Same) |
2026-06-04
01:52:28 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:adc | (Same) |
2026-06-04
01:52:08 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:romfs | (Same) |
2026-06-04
01:51:48 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:motor | (Same) |
2026-06-04
01:51:27 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:random | (Same) |
2026-06-04
01:51:07 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:capture | (Same) |
2026-06-04
01:50:46 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:twai | (Same) |
2026-06-04
01:50:26 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:analog_cmpr | (Same) |
2026-06-04
01:50:06 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:mcuboot_nsh | (Same) |
2026-06-04
01:49:45 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:crypto | (Same) |
2026-06-04
01:49:25 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:sdm | (Same) |
2026-06-04
01:49:04 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:temperature_sensor | (Same) |
2026-06-04
01:48:44 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:rtc | (Same) |
2026-06-04
01:48:23 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:efuse | (Same) |
2026-06-04
01:48:01 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:bmp180 | (Same) |
2026-06-04
01:47:41 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:ostest | (Same) |
2026-06-04
01:47:20 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32h2-devkit
:buttons | (Same) |
2026-06-04
01:47:00 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:usbconsole | (Same) |
2026-06-04
01:46:39 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:spiflash | (Same) |
2026-06-04
01:46:11 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:wifi | (Same) |
2026-06-04
01:45:50 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:rmt | (Same) |
2026-06-04
01:45:28 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:tickless | (Same) |
2026-06-04
01:45:07 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:gpio | (Same) |
2026-06-04
01:44:46 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:timers | (Same) |
2026-06-04
01:44:25 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:pwm | (Same) |
2026-06-04
01:44:04 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:watchdog | (Same) |
2026-06-04
01:43:44 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:nsh | (Same) |
2026-06-04
01:43:22 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:oa_tc6 | (Same) |
2026-06-04
01:43:01 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:i2c | (Same) |
2026-06-04
01:42:40 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:i2schar | In file included from ./common/espressif/esp_i2s.c:53:
11 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./esp_i2s.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sections' '-fdata-sections' '-nostdlib' '-march=rv32imac_zicsr_zifencei' '-mabi= |
2026-06-04
01:42:18 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:spi | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-04
01:41:56 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:sdmmc_spi | (Same) |
2026-06-04
01:41:34 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:romfs | (Same) |
2026-06-04
01:41:12 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:random | (Same) |
2026-06-04
01:40:50 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:twai | (Same) |
2026-06-04
01:40:29 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:mcuboot_nsh | (Same) |
2026-06-04
01:40:08 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:spislv | (Same) |
2026-06-04
01:39:40 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:sta_softap | (Same) |
2026-06-04
01:39:18 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:rtc | (Same) |
2026-06-04
01:38:57 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:efuse | (Same) |
2026-06-04
01:38:36 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:bmp180 | (Same) |
2026-06-04
01:38:15 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:ostest | (Same) |
2026-06-04
01:38:01 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-xiao
:wifi | (Unknown) |
2026-06-04
01:37:54 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:buttons | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-04
01:37:34 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-xiao
:nimble | (Unknown) |
2026-06-04
01:37:33 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:usbconsole | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-04
01:37:14 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-xiao
:gpio | (Unknown) |
2026-06-04
01:37:12 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:spiflash | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-04
01:36:53 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-xiao
:usbnsh | (Unknown) |
2026-06-04
01:36:44 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:wifi | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-04
01:36:32 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-xiao
:nsh | (Same) |
2026-06-04
01:36:23 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:rmt | (Same) |
2026-06-04
01:36:10 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-xiao
:ble | (Same) |
2026-06-04
01:36:02 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:tickless | (Same) |
2026-06-04
01:35:48 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-xiao
:smartfs | (Same) |
2026-06-04
01:35:40 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:qencoder | (Same) |
2026-06-04
01:35:28 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:usbconsole | (Same) |
2026-06-04
01:35:20 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:gpio | (Same) |
2026-06-04
01:35:08 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:spiflash | (Same) |
2026-06-04
01:34:58 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:timers | (Same) |
2026-06-04
01:34:41 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:wifi | (Same) |
2026-06-04
01:34:38 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:pwm | (Same) |
2026-06-04
01:34:19 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:nimble | (Same) |
2026-06-04
01:34:16 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:mpu60x0 | (Same) |
2026-06-04
01:33:59 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:rmt | (Same) |
2026-06-04
01:33:55 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:ulp | (Same) |
2026-06-04
01:33:38 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:tickless | (Same) |
2026-06-04
01:33:34 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:watchdog | (Same) |
2026-06-04
01:33:18 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:gpio | (Same) |
2026-06-04
01:33:13 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:nsh | (Same) |
2026-06-04
01:32:57 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:timers | (Same) |
2026-06-04
01:32:51 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:oa_tc6 | (Same) |
2026-06-04
01:32:37 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:pwm | (Same) |
2026-06-04
01:32:30 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:pm | (Same) |
2026-06-04
01:32:17 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:watchdog | (Same) |
2026-06-04
01:32:08 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:i2c | (Same) |
2026-06-04
01:31:56 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:nsh | (Same) |
2026-06-04
01:31:47 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:i2schar | In file included from ./common/espressif/esp_i2s.c:53:
11 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./esp_i2s.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sections' '-fdata-sections' '-nostdlib' '-march=rv32imac_zicsr_zifencei' '-mabi= |
2026-06-04
01:31:36 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:pm | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-04
01:31:25 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:spi | (Same) |
2026-06-04
01:31:15 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:i2c | (Same) |
2026-06-04
01:31:03 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:sdmmc_spi | (Same) |
2026-06-04
01:30:54 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:i2schar | In file included from ./common/espressif/esp_i2s.c:53:
11 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./esp_i2s.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sections' '-fdata-sections' '-nostdlib' '-march=rv32imc_zicsr_zifencei' '-mabi=i |
2026-06-04
01:30:41 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:ble | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-04
01:30:33 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:spi | (Same) |
2026-06-04
01:30:13 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:autopm | (Same) |
2026-06-04
01:30:12 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:sdmmc_spi | (Same) |
2026-06-04
01:29:52 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:adc | (Same) |
2026-06-04
01:29:50 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:ble | (Same) |
2026-06-04
01:29:31 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:romfs | (Same) |
2026-06-04
01:29:23 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:autopm | (Same) |
2026-06-04
01:29:10 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:motor | (Same) |
2026-06-04
01:29:02 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:adc | (Same) |
2026-06-04
01:28:49 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:random | (Same) |
2026-06-04
01:28:42 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:romfs | (Same) |
2026-06-04
01:28:28 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:capture | (Same) |
2026-06-04
01:28:21 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:random | (Same) |
2026-06-04
01:28:07 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:twai | (Same) |
2026-06-04
01:28:00 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:twai | (Same) |
2026-06-04
01:27:46 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:mcuboot_nsh | (Same) |
2026-06-04
01:27:40 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:mcuboot_nsh | (Same) |
2026-06-04
01:27:24 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:spislv | (Same) |
2026-06-04
01:27:19 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:crypto | (Same) |
2026-06-04
01:27:03 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:crypto | (Same) |
2026-06-04
01:26:59 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:sdm | (Same) |
2026-06-04
01:26:41 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:sdm | (Same) |
2026-06-04
01:26:38 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:temperature_sensor | (Same) |
2026-06-04
01:26:18 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:temperature_sensor | (Same) |
2026-06-04
01:26:10 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:sta_softap | (Same) |
2026-06-04
01:25:49 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:sta_softap | (Same) |
2026-06-04
01:25:32 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:mcuboot_update_agent | (Same) |
2026-06-04
01:25:21 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:mcuboot_update_agent | (Same) |
2026-06-04
01:25:12 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:rtc | (Same) |
2026-06-04
01:25:00 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:rtc | (Same) |
2026-06-04
01:24:52 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:efuse | (Same) |
2026-06-04
01:24:39 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:efuse | (Same) |
2026-06-04
01:24:31 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:bmp180 | (Same) |
2026-06-04
01:24:18 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:coremark | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-O3' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-04
01:24:11 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:ostest | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-04
01:23:57 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:bmp180 | (Same) |
2026-06-04
01:23:51 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:buttons | (Same) |
2026-06-04
01:23:37 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:ostest | (Same) |
2026-06-04
01:23:32 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32-c3-zero
:jumbo | (Unknown) |
2026-06-04
01:23:16 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:buttons | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-04
01:22:59 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32-c3-zero
:wifi | (Unknown) |
2026-06-04
01:22:53 | 19029:
cmake/nuttx_toolchain.cmake:
track preprocessed in | sim
:lua | % 0R e c e i v0e d %0 X f e r d0 A v e0r a g e S0p e e d 0e Te id m e 0 T- i- m:Te-i -m :e - - T i- -m :eT- i- m: e- - TC-iu-mr:er- e- n:C-tu-
r r e n t |
2026-06-04
01:22:33 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32-c3-zero
:usbnsh | (Unknown) |
2026-06-04
01:22:33 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-xiao
:wifi | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-04
01:22:13 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-xiao
:gpio | (Same) |
2026-06-04
01:22:12 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32-c3-zero
:nsh | (Same) |
2026-06-04
01:21:53 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-xiao
:usbnsh | (Same) |
2026-06-04
01:21:42 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32-c3-zero
:sta_softap | (Unknown) |
2026-06-04
01:21:33 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-xiao
:nsh | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-04
01:04:40 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitm
:efuse | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-04
01:03:56 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitm
:bmp180 | (Same) |
2026-06-04
01:03:54 | 3518:
system/popen:
select PIPES automatically when pope | icicle
:knsh | In file included from /github/workspace/sources/nuttx/include/libcxx/__filesystem/filesystem_error.h:15,
from /github/workspace/sources/nuttx/include/libcxx/__filesystem/directory_entry.h:20,
from /github/workspace/sources/nuttx/include/libcxx/filesystem:539,
from /github/workspace/sources/nuttx/include/libcxx/fstream:192,
from libcxx/libcxx/src/ios.instantiations.cpp:10:
##[error]/github/workspace/sources/nuttx/include/libcxx/__filesystem/path.h:623:30: error: use of built-in trait '__decay( |
2026-06-04
01:03:10 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitm
:ostest | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-04
01:01:58 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitm
:buttons | (Same) |
2026-06-04
01:01:14 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:usbconsole | (Same) |
2026-06-04
01:00:06 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:spiflash | (Same) |
2026-06-04
00:58:22 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:wifi | (Same) |
2026-06-04
00:58:12 | 3518:
system/popen:
select PIPES automatically when pope | qemu-armv8a
:fastboot | 76d75
< CONFIG_PIPES=y
Saving the new configuration file |
2026-06-04
00:57:37 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:rmt | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-04
00:56:44 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:tickless | (Same) |
2026-06-04
00:55:59 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:qencoder | (Same) |
2026-06-04
00:55:16 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:gpio | (Same) |
2026-06-04
00:54:31 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:timers | (Same) |
2026-06-04
00:53:48 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:pwm | (Same) |
2026-06-04
00:53:03 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:mpu60x0 | (Same) |
2026-06-04
00:52:17 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:ulp | (Same) |
2026-06-04
00:51:33 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:watchdog | (Same) |
2026-06-04
00:51:32 | 3518:
system/popen:
select PIPES automatically when pope | sim
:sqlite | 47d46
< CONFIG_PIPES=y
Saving the new configuration file |
2026-06-04
00:50:49 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:nsh | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-04
00:49:51 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:oa_tc6 | (Same) |
2026-06-04
00:49:02 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:pm | In file included from board/esp32c6_bringup.c:41:
23 | #ifndef __BOARDS_RISCV_ESP32C6_COMMON_INCLUDE_ESP_BOARD_I2C_H
24 | #define __BOARDS_RISCV_ESP32C3_COMMON_INCLUDE_ESP_BOARD_I2C_H
cc1: all warnings being treated as errors
make[1]: *** [/github/workspace/sources/nuttx/boards/Board.mk:100: esp32c6_bringup.o] Error 1
make[1]: Target 'libboard.a' not remade because of errors.
make: *** [tools/LibTargets.mk:89: arch/risc-v/src/board/libboard.a] Error 2
##[error]chip/esp-hal-3rdparty/comp |
2026-06-04
00:48:17 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:i2c | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-04
00:47:26 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:i2schar | (Same) |
2026-06-04
00:46:41 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:spi | (Same) |
2026-06-04
00:45:55 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:sdmmc_spi | (Same) |
2026-06-04
00:45:06 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-xiao
:wifi | (Unknown) |
2026-06-04
00:44:46 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-xiao
:nimble | (Same) |
2026-06-04
00:44:42 | 19029:
cmake/nuttx_toolchain.cmake:
track preprocessed in | esp32-c3-zero
:sta_softap | (Same) |
2026-06-04
00:44:34 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:ble | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-04
00:44:29 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-xiao
:gpio | (Unknown) |
2026-06-04
00:44:11 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-xiao
:usbnsh | (Same) |
2026-06-04
00:43:28 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-xiao
:nsh | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-04
00:42:49 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:autopm | (Same) |
2026-06-04
00:42:39 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-xiao
:ble | (Same) |
2026-06-04
00:42:04 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:adc | (Same) |
2026-06-04
00:41:19 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:romfs | (Same) |
2026-06-04
00:41:18 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-xiao
:smartfs | (Same) |
2026-06-04
00:40:35 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:motor | (Same) |
2026-06-04
00:40:35 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:usbconsole | (Same) |
2026-06-04
00:39:50 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:random | (Same) |
2026-06-04
00:39:27 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:spiflash | (Same) |
2026-06-04
00:39:06 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:capture | (Same) |
2026-06-04
00:38:23 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:wifi | (Same) |
2026-06-04
00:38:22 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:twai | (Same) |
2026-06-04
00:37:39 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:mcuboot_nsh | (Same) |
2026-06-04
00:37:02 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:nimble | (Same) |
2026-06-04
00:36:52 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:spislv | In file included from board/esp32c6_bringup.c:41:
23 | #ifndef __BOARDS_RISCV_ESP32C6_COMMON_INCLUDE_ESP_BOARD_I2C_H
24 | #define __BOARDS_RISCV_ESP32C3_COMMON_INCLUDE_ESP_BOARD_I2C_H
cc1: all warnings being treated as errors
make[1]: *** [/github/workspace/sources/nuttx/boards/Board.mk:100: esp32c6_bringup.o] Error 1
make[1]: Target 'libboard.a' not remade because of errors.
make: *** [tools/LibTargets.mk:89: arch/risc-v/src/board/libboard.a] Error 2
##[error]chip/esp-hal-3rdparty/comp |
2026-06-04
00:36:18 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:rmt | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-04
00:35:41 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:crypto | (Same) |
2026-06-04
00:35:25 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:tickless | (Same) |
2026-06-04
00:34:57 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:sdm | (Same) |
2026-06-04
00:34:42 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:gpio | (Same) |
2026-06-04
00:34:13 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:temperature_sensor | (Same) |
2026-06-04
00:33:58 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:timers | (Same) |
2026-06-04
00:33:15 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:pwm | (Same) |
2026-06-04
00:33:07 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:sta_softap | (Same) |
2026-06-04
00:32:31 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:watchdog | (Same) |
2026-06-04
00:31:57 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:mcuboot_update_agent | (Same) |
2026-06-04
00:31:49 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:nsh | (Same) |
2026-06-04
00:31:02 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:pm | (Same) |
2026-06-04
00:30:48 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:rtc | (Same) |
2026-06-04
00:30:19 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:i2c | (Same) |
2026-06-04
00:30:03 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:efuse | (Same) |
2026-06-04
00:29:34 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:i2schar | (Same) |
2026-06-04
00:28:51 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:spi | (Same) |
2026-06-04
00:28:51 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:coremark | (Same) |
2026-06-04
00:28:07 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:bmp180 | (Same) |
2026-06-04
00:28:01 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:sdmmc_spi | (Same) |
2026-06-04
00:27:23 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:ostest | (Same) |
2026-06-04
00:26:43 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:ble | (Same) |
2026-06-04
00:26:39 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-devkitc
:buttons | (Same) |
2026-06-04
00:25:00 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:autopm | (Same) |
2026-06-04
00:24:42 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-xiao
:wifi | (Same) |
2026-06-04
00:24:18 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:adc | (Same) |
2026-06-04
00:23:58 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-xiao
:gpio | (Same) |
2026-06-04
00:23:34 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:romfs | (Same) |
2026-06-04
00:23:14 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-xiao
:usbnsh | (Same) |
2026-06-04
00:22:50 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:random | (Same) |
2026-06-04
00:22:44 | 3518:
system/popen:
select PIPES automatically when pope | esp32c6-xiao
:nsh | (Same) |
2026-06-04
00:22:07 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:twai | (Same) |
2026-06-04
00:21:25 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:mcuboot_nsh | (Same) |
2026-06-04
00:20:15 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:crypto | (Same) |
2026-06-04
00:19:32 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:sdm | (Same) |
2026-06-04
00:18:50 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:temperature_sensor | (Same) |
2026-06-04
00:17:44 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:sta_softap | (Same) |
2026-06-04
00:15:38 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:mcuboot_update_agent | (Same) |
2026-06-04
00:15:37 | 3518:
system/popen:
select PIPES automatically when pope | sim
:matter | CMake Error at /github/workspace/sources/nuttx/build/_deps/libcxx-subbuild/libcxx-populate-prefix/src/libcxx-populate-stamp/download-libcxx-populate.cmake:170 (message):
Each download failed!
error: downloading 'https://github.com/llvm/llvm-project/releases/download/llvmorg-17.0.6/libcxx-17.0.6.src.tar.xz' failed
status_code: 22
status_string: "HTTP response code said error"
log:
--- LOG BEGIN ---
Trying 140.82.112.3:443...
Connected to github.com (140.82.112.3) port 443 (#0)
AL |
2026-06-04
00:14:31 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:rtc | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-04
00:13:48 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:efuse | (Same) |
2026-06-04
00:13:05 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:bmp180 | (Same) |
2026-06-04
00:12:23 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:ostest | (Same) |
2026-06-04
00:11:57 | 3518:
system/popen:
select PIPES automatically when pope | sim
:lua | T i0m e 0 T i m e0 C u rr0e n t |
2026-06-04
00:11:39 | 3518:
system/popen:
select PIPES automatically when pope | esp32c3-devkit
:buttons | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-04
00:11:22 | 3518:
system/popen:
select PIPES automatically when pope | esp32-c3-zero
:jumbo | (Unknown) |
2026-06-04
00:10:45 | 3518:
system/popen:
select PIPES automatically when pope | esp32-c3-zero
:wifi | (Same) |
2026-06-04
00:10:27 | 3518:
system/popen:
select PIPES automatically when pope | esp32-c3-zero
:usbnsh | (Same) |
2026-06-04
00:09:15 | 3518:
system/popen:
select PIPES automatically when pope | esp32-c3-zero
:nsh | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-04
00:08:38 | 3518:
system/popen:
select PIPES automatically when pope | esp32-c3-zero
:sta_softap | (Unknown) |
2026-06-03
22:33:37 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitm
:efuse | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
22:32:53 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitm
:bmp180 | (Same) |
2026-06-03
22:32:08 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitm
:ostest | (Same) |
2026-06-03
22:30:56 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitm
:buttons | (Same) |
2026-06-03
22:30:13 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:usbconsole | (Same) |
2026-06-03
22:30:04 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | icicle
:rpmsg-sbi | In file included from chip/mpfs_opensbi.c:57:
##[error]/github/workspace/sources/nuttx/arch/risc-v/src/opensbi/opensbi-3rdparty/include/sbi/sbi_types.h:47:33: error: 'bool' cannot be defined via 'typedef'
47 | typedef int bool;
| ^~~~
##[error]/github/workspace/sources/nuttx/arch/risc-v/src/opensbi/opensbi-3rdparty/include/sbi/sbi_types.h:47:1: error: useless type name in empty declaration [-Werror]
47 | typedef int bool; |
2026-06-03
22:29:21 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | icicle
:knsh | In file included from /github/workspace/sources/nuttx/include/libcxx/__filesystem/filesystem_error.h:15,
from /github/workspace/sources/nuttx/include/libcxx/__filesystem/directory_entry.h:20,
from /github/workspace/sources/nuttx/include/libcxx/filesystem:539,
from /github/workspace/sources/nuttx/include/libcxx/fstream:192,
from libcxx/libcxx/src/ios.instantiations.cpp:10:
##[error]/github/workspace/sources/nuttx/include/libcxx/__filesystem/path.h:623:30: error: use of built-in trait '__decay( |
2026-06-03
22:29:04 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | rv-virt
:citest | (Same) |
2026-06-03
22:29:04 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:spiflash | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
22:27:20 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:wifi | (Same) |
2026-06-03
22:26:36 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:rmt | (Same) |
2026-06-03
22:25:43 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:tickless | (Same) |
2026-06-03
22:25:07 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-legacy-devkit
:cxx | In file included from /github/workspace/sources/nuttx/include/libcxx/__filesystem/filesystem_error.h:15,
from /github/workspace/sources/nuttx/include/libcxx/__filesystem/directory_entry.h:20,
from /github/workspace/sources/nuttx/include/libcxx/filesystem:539,
from /github/workspace/sources/nuttx/include/libcxx/fstream:192,
from libcxx/libcxx/src/ios.instantiations.cpp:10:
##[error]/github/workspace/sources/nuttx/include/libcxx/__filesystem/path.h:623:30: error: use of built-in trait '__decay( |
2026-06-03
22:25:00 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:qencoder | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
22:24:17 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:gpio | (Same) |
2026-06-03
22:24:02 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | icicle
:rpmsg-sbi | In file included from chip/mpfs_opensbi.c:57:
##[error]/github/workspace/sources/nuttx/arch/risc-v/src/opensbi/opensbi-3rdparty/include/sbi/sbi_types.h:47:33: error: 'bool' cannot be defined via 'typedef'
47 | typedef int bool;
| ^~~~
##[error]/github/workspace/sources/nuttx/arch/risc-v/src/opensbi/opensbi-3rdparty/include/sbi/sbi_types.h:47:1: error: useless type name in empty declaration [-Werror]
47 | typedef int bool; |
2026-06-03
22:23:50 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitm
:bmp180 | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
22:23:33 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:timers | (Same) |
2026-06-03
22:23:18 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | icicle
:knsh | In file included from /github/workspace/sources/nuttx/include/libcxx/__filesystem/filesystem_error.h:15,
from /github/workspace/sources/nuttx/include/libcxx/__filesystem/directory_entry.h:20,
from /github/workspace/sources/nuttx/include/libcxx/filesystem:539,
from /github/workspace/sources/nuttx/include/libcxx/fstream:192,
from libcxx/libcxx/src/ios.instantiations.cpp:10:
##[error]/github/workspace/sources/nuttx/include/libcxx/__filesystem/path.h:623:30: error: use of built-in trait '__decay( |
2026-06-03
22:23:03 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitm
:ostest | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
22:22:51 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:pwm | (Same) |
2026-06-03
22:22:07 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:mpu60x0 | (Same) |
2026-06-03
22:21:50 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitm
:buttons | (Same) |
2026-06-03
22:21:22 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:ulp | (Same) |
2026-06-03
22:21:06 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:usbconsole | (Same) |
2026-06-03
22:20:40 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | rv-virt
:citest | In file included from /github/workspace/sources/nuttx/include/libcxx/__filesystem/filesystem_error.h:15,
from /github/workspace/sources/nuttx/include/libcxx/__filesystem/directory_entry.h:20,
from /github/workspace/sources/nuttx/include/libcxx/filesystem:539,
from /github/workspace/sources/nuttx/include/libcxx/fstream:192,
from libcxx/libcxx/src/ios.instantiations.cpp:10:
##[error]/github/workspace/sources/nuttx/include/libcxx/__filesystem/path.h:623:30: error: use of built-in trait '__decay( |
2026-06-03
22:20:39 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:watchdog | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
22:19:56 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:nsh | (Same) |
2026-06-03
22:19:56 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:spiflash | (Same) |
2026-06-03
22:18:58 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:oa_tc6 | (Same) |
2026-06-03
22:18:11 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:wifi | (Same) |
2026-06-03
22:18:10 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:pm | (Same) |
2026-06-03
22:17:27 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:i2c | (Same) |
2026-06-03
22:17:25 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:rmt | (Same) |
2026-06-03
22:16:35 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:i2schar | (Same) |
2026-06-03
22:16:31 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:tickless | (Same) |
2026-06-03
22:15:52 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:spi | (Same) |
2026-06-03
22:15:46 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:qencoder | (Same) |
2026-06-03
22:15:18 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-legacy-devkit
:cxx | In file included from /github/workspace/sources/nuttx/include/libcxx/__filesystem/filesystem_error.h:15,
from /github/workspace/sources/nuttx/include/libcxx/__filesystem/directory_entry.h:20,
from /github/workspace/sources/nuttx/include/libcxx/filesystem:539,
from /github/workspace/sources/nuttx/include/libcxx/fstream:192,
from libcxx/libcxx/src/ios.instantiations.cpp:10:
##[error]/github/workspace/sources/nuttx/include/libcxx/__filesystem/path.h:623:30: error: use of built-in trait '__decay( |
2026-06-03
22:15:07 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:sdmmc_spi | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
22:15:02 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:gpio | (Same) |
2026-06-03
22:14:16 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:timers | (Same) |
2026-06-03
22:13:45 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:ble | (Same) |
2026-06-03
22:13:32 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:pwm | (Same) |
2026-06-03
22:12:47 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:mpu60x0 | (Same) |
2026-06-03
22:11:59 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:autopm | (Same) |
2026-06-03
22:11:59 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:ulp | (Same) |
2026-06-03
22:11:16 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:adc | (Same) |
2026-06-03
22:11:14 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:watchdog | (Same) |
2026-06-03
22:10:32 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:romfs | (Same) |
2026-06-03
22:10:30 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:nsh | (Same) |
2026-06-03
22:09:49 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:motor | (Same) |
2026-06-03
22:09:31 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:oa_tc6 | (Same) |
2026-06-03
22:09:05 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:random | (Same) |
2026-06-03
22:08:41 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:pm | (Same) |
2026-06-03
22:08:21 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:capture | (Same) |
2026-06-03
22:07:56 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:i2c | (Same) |
2026-06-03
22:07:38 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:twai | (Same) |
2026-06-03
22:07:03 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:i2schar | (Same) |
2026-06-03
22:06:56 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:mcuboot_nsh | (Same) |
2026-06-03
22:06:18 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:spi | (Same) |
2026-06-03
22:06:10 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:spislv | In file included from board/esp32c6_bringup.c:41:
23 | #ifndef __BOARDS_RISCV_ESP32C6_COMMON_INCLUDE_ESP_BOARD_I2C_H
24 | #define __BOARDS_RISCV_ESP32C3_COMMON_INCLUDE_ESP_BOARD_I2C_H
cc1: all warnings being treated as errors
make[1]: *** [/github/workspace/sources/nuttx/boards/Board.mk:100: esp32c6_bringup.o] Error 1
make[1]: Target 'libboard.a' not remade because of errors.
make: *** [tools/LibTargets.mk:89: arch/risc-v/src/board/libboard.a] Error 2
##[error]chip/esp-hal-3rdparty/comp |
2026-06-03
22:05:31 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:sdmmc_spi | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
22:04:59 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:crypto | (Same) |
2026-06-03
22:04:25 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-xiao
:wifi | (Unknown) |
2026-06-03
22:04:16 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:sdm | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
22:04:08 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:ble | (Same) |
2026-06-03
22:04:05 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-xiao
:nimble | (Unknown) |
2026-06-03
22:03:49 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-xiao
:gpio | (Same) |
2026-06-03
22:03:33 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:temperature_sensor | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
22:03:32 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-xiao
:usbnsh | (Unknown) |
2026-06-03
22:02:49 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-xiao
:nsh | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
22:02:27 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:sta_softap | (Same) |
2026-06-03
22:02:22 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:autopm | (Same) |
2026-06-03
22:02:00 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-xiao
:ble | (Same) |
2026-06-03
22:01:37 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:adc | (Same) |
2026-06-03
22:01:18 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:mcuboot_update_agent | (Same) |
2026-06-03
22:00:52 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:romfs | (Same) |
2026-06-03
22:00:41 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-xiao
:smartfs | (Same) |
2026-06-03
22:00:08 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:rtc | (Same) |
2026-06-03
22:00:07 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:motor | (Same) |
2026-06-03
21:59:57 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:usbconsole | (Same) |
2026-06-03
21:59:24 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:efuse | (Same) |
2026-06-03
21:59:21 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:random | (Same) |
2026-06-03
21:58:48 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:spiflash | (Same) |
2026-06-03
21:58:36 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:capture | (Same) |
2026-06-03
21:58:11 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:coremark | (Same) |
2026-06-03
21:57:51 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:twai | (Same) |
2026-06-03
21:57:45 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:wifi | (Same) |
2026-06-03
21:57:28 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:bmp180 | (Same) |
2026-06-03
21:57:07 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:mcuboot_nsh | (Same) |
2026-06-03
21:56:45 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:ostest | (Same) |
2026-06-03
21:56:26 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:nimble | (Same) |
2026-06-03
21:56:20 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:spislv | In file included from board/esp32c6_bringup.c:41:
23 | #ifndef __BOARDS_RISCV_ESP32C6_COMMON_INCLUDE_ESP_BOARD_I2C_H
24 | #define __BOARDS_RISCV_ESP32C3_COMMON_INCLUDE_ESP_BOARD_I2C_H
cc1: all warnings being treated as errors
make[1]: *** [/github/workspace/sources/nuttx/boards/Board.mk:100: esp32c6_bringup.o] Error 1
make[1]: Target 'libboard.a' not remade because of errors.
make: *** [tools/LibTargets.mk:89: arch/risc-v/src/board/libboard.a] Error 2
##[error]chip/esp-hal-3rdparty/comp |
2026-06-03
21:56:02 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-devkitc
:buttons | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:55:42 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:rmt | (Same) |
2026-06-03
21:55:12 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-xiao
:wifi | (Unknown) |
2026-06-03
21:55:08 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:crypto | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:54:54 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-xiao
:nimble | (Unknown) |
2026-06-03
21:54:50 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:tickless | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:54:37 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-xiao
:gpio | (Unknown) |
2026-06-03
21:54:23 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:sdm | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:54:21 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-xiao
:usbnsh | (Unknown) |
2026-06-03
21:54:07 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:gpio | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:53:57 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-xiao
:wifi | (Same) |
2026-06-03
21:53:38 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:temperature_sensor | (Same) |
2026-06-03
21:53:38 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-xiao
:nsh | (Same) |
2026-06-03
21:53:23 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:timers | (Same) |
2026-06-03
21:53:14 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-xiao
:gpio | (Same) |
2026-06-03
21:52:51 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-xiao
:ble | (Same) |
2026-06-03
21:52:41 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:pwm | (Same) |
2026-06-03
21:52:31 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-xiao
:usbnsh | (Same) |
2026-06-03
21:52:30 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:sta_softap | (Same) |
2026-06-03
21:52:02 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c6-xiao
:nsh | (Same) |
2026-06-03
21:51:57 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:watchdog | (Same) |
2026-06-03
21:51:34 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-xiao
:smartfs | (Same) |
2026-06-03
21:51:20 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:mcuboot_update_agent | (Same) |
2026-06-03
21:51:14 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:nsh | (Same) |
2026-06-03
21:50:53 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:usbconsole | (Same) |
2026-06-03
21:50:26 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:pm | (Same) |
2026-06-03
21:50:10 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:rtc | (Same) |
2026-06-03
21:49:47 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:spiflash | (Same) |
2026-06-03
21:49:42 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:i2c | (Same) |
2026-06-03
21:49:24 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:efuse | (Same) |
2026-06-03
21:48:56 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:i2schar | (Same) |
2026-06-03
21:48:46 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:wifi | (Same) |
2026-06-03
21:48:12 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:spi | (Same) |
2026-06-03
21:48:11 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:coremark | (Same) |
2026-06-03
21:47:29 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:nimble | (Same) |
2026-06-03
21:47:26 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:bmp180 | (Same) |
2026-06-03
21:47:20 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:sdmmc_spi | (Same) |
2026-06-03
21:46:46 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:rmt | (Same) |
2026-06-03
21:46:42 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:ostest | (Same) |
2026-06-03
21:46:01 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:ble | (Same) |
2026-06-03
21:45:56 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-devkitc
:buttons | (Same) |
2026-06-03
21:45:56 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:tickless | (Same) |
2026-06-03
21:45:14 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:gpio | (Same) |
2026-06-03
21:44:31 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:timers | (Same) |
2026-06-03
21:44:16 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:autopm | (Same) |
2026-06-03
21:43:57 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-xiao
:wifi | (Same) |
2026-06-03
21:43:50 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:pwm | (Same) |
2026-06-03
21:43:32 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:adc | (Same) |
2026-06-03
21:43:13 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-xiao
:gpio | (Same) |
2026-06-03
21:43:07 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:watchdog | (Same) |
2026-06-03
21:42:48 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:romfs | (Same) |
2026-06-03
21:42:29 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-xiao
:usbnsh | (Same) |
2026-06-03
21:42:25 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:nsh | (Same) |
2026-06-03
21:42:03 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:random | (Same) |
2026-06-03
21:41:58 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c6-xiao
:nsh | (Same) |
2026-06-03
21:41:39 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:pm | (Same) |
2026-06-03
21:41:20 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:twai | (Same) |
2026-06-03
21:40:56 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:i2c | (Same) |
2026-06-03
21:40:38 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:mcuboot_nsh | (Same) |
2026-06-03
21:40:11 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:i2schar | (Same) |
2026-06-03
21:39:29 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:spi | (Same) |
2026-06-03
21:39:28 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:crypto | (Same) |
2026-06-03
21:38:45 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:sdm | (Same) |
2026-06-03
21:38:38 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:sdmmc_spi | (Same) |
2026-06-03
21:38:01 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:temperature_sensor | (Same) |
2026-06-03
21:37:22 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:ble | (Same) |
2026-06-03
21:36:55 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:sta_softap | (Same) |
2026-06-03
21:35:40 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:autopm | (Same) |
2026-06-03
21:34:58 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:mcuboot_update_agent | (Same) |
2026-06-03
21:34:57 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:adc | (Same) |
2026-06-03
21:34:15 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:romfs | (Same) |
2026-06-03
21:33:50 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:rtc | (Same) |
2026-06-03
21:33:31 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:random | (Same) |
2026-06-03
21:33:06 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:efuse | (Same) |
2026-06-03
21:32:47 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:twai | (Same) |
2026-06-03
21:32:24 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | sim
:lua | T0i m e 0 T i m0e C u r0r e n t |
2026-06-03
21:32:23 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:bmp180 | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:32:05 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:mcuboot_nsh | (Same) |
2026-06-03
21:31:40 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:ostest | (Same) |
2026-06-03
21:30:56 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32c3-devkit
:buttons | (Same) |
2026-06-03
21:30:55 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:crypto | (Same) |
2026-06-03
21:30:40 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32-c3-zero
:jumbo | (Unknown) |
2026-06-03
21:30:12 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:sdm | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:30:10 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32-c3-zero
:wifi | (Unknown) |
2026-06-03
21:29:52 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32-c3-zero
:usbnsh | (Same) |
2026-06-03
21:29:28 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:temperature_sensor | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:29:12 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitm
:buttons | (Same) |
2026-06-03
21:28:58 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:mpu60x0 | (Same) |
2026-06-03
21:28:40 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32-c3-zero
:nsh | (Same) |
2026-06-03
21:28:36 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:usbconsole | (Same) |
2026-06-03
21:28:22 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:sta_softap | (Same) |
2026-06-03
21:28:12 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32-c3-zero
:sta_softap | (Unknown) |
2026-06-03
21:28:10 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:ulp | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:27:39 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:spiflash | (Same) |
2026-06-03
21:27:24 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:watchdog | (Same) |
2026-06-03
21:26:38 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:nsh | (Same) |
2026-06-03
21:26:27 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:mcuboot_update_agent | (Same) |
2026-06-03
21:26:13 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:wifi | (Same) |
2026-06-03
21:25:59 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitm
:buttons | (Same) |
2026-06-03
21:25:39 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:oa_tc6 | (Same) |
2026-06-03
21:25:36 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:rmt | (Same) |
2026-06-03
21:25:25 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:usbconsole | (Same) |
2026-06-03
21:25:20 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:rtc | (Same) |
2026-06-03
21:24:53 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:tickless | (Same) |
2026-06-03
21:24:47 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:pm | (Same) |
2026-06-03
21:24:37 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:efuse | (Same) |
2026-06-03
21:24:30 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:spiflash | (Same) |
2026-06-03
21:24:17 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:qencoder | (Same) |
2026-06-03
21:24:00 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:i2c | (Same) |
2026-06-03
21:23:53 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:bmp180 | (Same) |
2026-06-03
21:23:42 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:gpio | (Same) |
2026-06-03
21:23:10 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:ostest | (Same) |
2026-06-03
21:23:07 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:wifi | (Same) |
2026-06-03
21:23:06 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:timers | (Same) |
2026-06-03
21:23:06 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:i2schar | (Same) |
2026-06-03
21:22:31 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:rmt | (Same) |
2026-06-03
21:22:29 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:pwm | (Same) |
2026-06-03
21:22:26 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32c3-devkit
:buttons | (Same) |
2026-06-03
21:22:19 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:spi | (Same) |
2026-06-03
21:22:08 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32-c3-zero
:jumbo | (Unknown) |
2026-06-03
21:21:53 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:mpu60x0 | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:21:49 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:tickless | (Same) |
2026-06-03
21:21:39 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32-c3-zero
:wifi | (Unknown) |
2026-06-03
21:21:30 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:sdmmc_spi | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:21:21 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32-c3-zero
:usbnsh | (Unknown) |
2026-06-03
21:21:15 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:ulp | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:21:13 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:qencoder | (Same) |
2026-06-03
21:20:46 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | sim
:lua | T i m e T i m e C ur r e n t
d U
p l o0a d T0o t a l 0 S p e n0 0 0 t L0e f t S p0e e-d-
:--
: - -0 - - : - -0: - - -0- : - - : -0- 0 0 0 0 0 --: --%: --T o-t-a:l- - : -- %- -R:e-c-e:i-v-e d % Xferd Aver0age Speed Time Time Time Current |
2026-06-03
21:20:38 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:watchdog | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:20:38 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:gpio | (Same) |
2026-06-03
21:20:33 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-legacy-devkit
:cxx | In file included from /github/workspace/sources/nuttx/include/libcxx/__filesystem/filesystem_error.h:15,
from /github/workspace/sources/nuttx/include/libcxx/__filesystem/directory_entry.h:20,
from /github/workspace/sources/nuttx/include/libcxx/filesystem:539,
from /github/workspace/sources/nuttx/include/libcxx/fstream:192,
from libcxx/libcxx/src/ios.instantiations.cpp:10:
##[error]/github/workspace/sources/nuttx/include/libcxx/__filesystem/path.h:623:30: error: use of built-in trait '__decay( |
2026-06-03
21:20:10 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32-c3-zero
:nsh | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:20:05 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:ble | (Same) |
2026-06-03
21:20:03 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:timers | (Same) |
2026-06-03
21:20:02 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:nsh | (Same) |
2026-06-03
21:20:02 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-legacy-devkit
:cxx | In file included from /github/workspace/sources/nuttx/include/libcxx/__filesystem/filesystem_error.h:15,
from /github/workspace/sources/nuttx/include/libcxx/__filesystem/directory_entry.h:20,
from /github/workspace/sources/nuttx/include/libcxx/filesystem:539,
from /github/workspace/sources/nuttx/include/libcxx/fstream:192,
from libcxx/libcxx/src/ios.instantiations.cpp:10:
##[error]/github/workspace/sources/nuttx/include/libcxx/__filesystem/path.h:623:30: error: use of built-in trait '__decay( |
2026-06-03
21:19:41 | 3521:
examples/microros_sub:
Add minimal Int32 subscribe | esp32-c3-zero
:sta_softap | (Unknown) |
2026-06-03
21:19:28 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:pwm | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:19:14 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:oa_tc6 | (Same) |
2026-06-03
21:18:52 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:mpu60x0 | (Same) |
2026-06-03
21:18:34 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:pm | (Same) |
2026-06-03
21:18:16 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:autopm | (Same) |
2026-06-03
21:18:15 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:ulp | (Same) |
2026-06-03
21:17:58 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:i2c | (Same) |
2026-06-03
21:17:40 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:watchdog | (Same) |
2026-06-03
21:17:36 | 3519:
apps:
add missing module metadata for executable t | esp32c3-legacy-devkit
:cxx | In file included from /github/workspace/sources/nuttx/include/libcxx/__filesystem/filesystem_error.h:15,
from /github/workspace/sources/nuttx/include/libcxx/__filesystem/directory_entry.h:20,
from /github/workspace/sources/nuttx/include/libcxx/filesystem:539,
from /github/workspace/sources/nuttx/include/libcxx/fstream:192,
from libcxx/libcxx/src/ios.instantiations.cpp:10:
##[error]/github/workspace/sources/nuttx/include/libcxx/__filesystem/path.h:623:30: error: use of built-in trait '__decay( |
2026-06-03
21:17:29 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:adc | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:17:16 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:i2schar | (Same) |
2026-06-03
21:17:04 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:nsh | (Same) |
2026-06-03
21:16:42 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:romfs | (Same) |
2026-06-03
21:16:40 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:spi | (Same) |
2026-06-03
21:16:17 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:oa_tc6 | (Same) |
2026-06-03
21:16:01 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:sdmmc_spi | (Same) |
2026-06-03
21:15:55 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:motor | (Same) |
2026-06-03
21:15:36 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:pm | (Same) |
2026-06-03
21:15:08 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:random | (Same) |
2026-06-03
21:14:59 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:i2c | (Same) |
2026-06-03
21:14:52 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:ble | (Same) |
2026-06-03
21:14:21 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:capture | (Same) |
2026-06-03
21:14:18 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:i2schar | (Same) |
2026-06-03
21:13:43 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:spi | (Same) |
2026-06-03
21:13:35 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:twai | (Same) |
2026-06-03
21:13:24 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:autopm | (Same) |
2026-06-03
21:13:06 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:sdmmc_spi | (Same) |
2026-06-03
21:12:49 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:mcuboot_nsh | (Same) |
2026-06-03
21:12:48 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:adc | (Same) |
2026-06-03
21:12:11 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:romfs | (Same) |
2026-06-03
21:12:00 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:spislv | In file included from board/esp32c6_bringup.c:41:
23 | #ifndef __BOARDS_RISCV_ESP32C6_COMMON_INCLUDE_ESP_BOARD_I2C_H
24 | #define __BOARDS_RISCV_ESP32C3_COMMON_INCLUDE_ESP_BOARD_I2C_H
cc1: all warnings being treated as errors
make[1]: *** [/github/workspace/sources/nuttx/boards/Board.mk:100: esp32c6_bringup.o] Error 1
make[1]: Target 'libboard.a' not remade because of errors.
make: *** [tools/LibTargets.mk:89: arch/risc-v/src/board/libboard.a] Error 2
##[error]chip/esp-hal-3rdparty/comp |
2026-06-03
21:12:00 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:ble | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:11:35 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:motor | (Same) |
2026-06-03
21:10:58 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:random | (Same) |
2026-06-03
21:10:45 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:crypto | (Same) |
2026-06-03
21:10:34 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:autopm | (Same) |
2026-06-03
21:10:21 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:capture | (Same) |
2026-06-03
21:09:59 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:sdm | (Same) |
2026-06-03
21:09:57 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:adc | (Same) |
2026-06-03
21:09:43 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:twai | (Same) |
2026-06-03
21:09:21 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:romfs | (Same) |
2026-06-03
21:09:12 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:temperature_sensor | (Same) |
2026-06-03
21:09:06 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:mcuboot_nsh | (Same) |
2026-06-03
21:08:46 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:motor | (Same) |
2026-06-03
21:08:28 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:spislv | In file included from board/esp32c6_bringup.c:41:
23 | #ifndef __BOARDS_RISCV_ESP32C6_COMMON_INCLUDE_ESP_BOARD_I2C_H
24 | #define __BOARDS_RISCV_ESP32C3_COMMON_INCLUDE_ESP_BOARD_I2C_H
cc1: all warnings being treated as errors
make[1]: *** [/github/workspace/sources/nuttx/boards/Board.mk:100: esp32c6_bringup.o] Error 1
make[1]: Target 'libboard.a' not remade because of errors.
make: *** [tools/LibTargets.mk:89: arch/risc-v/src/board/libboard.a] Error 2
##[error]chip/esp-hal-3rdparty/comp |
2026-06-03
21:08:10 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:random | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:08:03 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:sta_softap | (Same) |
2026-06-03
21:07:35 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:capture | (Same) |
2026-06-03
21:07:28 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:crypto | (Same) |
2026-06-03
21:07:00 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:twai | (Same) |
2026-06-03
21:06:51 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:sdm | (Same) |
2026-06-03
21:06:50 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:mcuboot_update_agent | (Same) |
2026-06-03
21:06:25 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:mcuboot_nsh | (Same) |
2026-06-03
21:06:15 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:temperature_sensor | (Same) |
2026-06-03
21:05:48 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:spislv | In file included from board/esp32c6_bringup.c:41:
23 | #ifndef __BOARDS_RISCV_ESP32C6_COMMON_INCLUDE_ESP_BOARD_I2C_H
24 | #define __BOARDS_RISCV_ESP32C3_COMMON_INCLUDE_ESP_BOARD_I2C_H
cc1: all warnings being treated as errors
make[1]: *** [/github/workspace/sources/nuttx/boards/Board.mk:100: esp32c6_bringup.o] Error 1
make[1]: Target 'libboard.a' not remade because of errors.
make: *** [tools/LibTargets.mk:89: arch/risc-v/src/board/libboard.a] Error 2
##[error]chip/esp-hal-3rdparty/comp |
2026-06-03
21:05:37 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:rtc | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:05:19 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:sta_softap | (Same) |
2026-06-03
21:04:51 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:efuse | (Same) |
2026-06-03
21:04:51 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:crypto | (Same) |
2026-06-03
21:04:21 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:mcuboot_update_agent | (Same) |
2026-06-03
21:04:16 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:sdm | (Same) |
2026-06-03
21:03:41 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:temperature_sensor | (Same) |
2026-06-03
21:03:37 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:coremark | (Same) |
2026-06-03
21:03:22 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:rtc | (Same) |
2026-06-03
21:02:51 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:bmp180 | (Same) |
2026-06-03
21:02:49 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:sta_softap | (Same) |
2026-06-03
21:02:45 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:efuse | (Same) |
2026-06-03
21:02:06 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:ostest | (Same) |
2026-06-03
21:01:54 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:mcuboot_update_agent | (Same) |
2026-06-03
21:01:43 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:coremark | (Same) |
2026-06-03
21:01:19 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-devkitc
:buttons | (Same) |
2026-06-03
21:01:05 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:bmp180 | (Same) |
2026-06-03
21:00:58 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:rtc | (Same) |
2026-06-03
21:00:32 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-xiao
:wifi | (Unknown) |
2026-06-03
21:00:27 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:ostest | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
21:00:23 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:efuse | (Same) |
2026-06-03
21:00:12 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-xiao
:nimble | (Unknown) |
2026-06-03
20:59:56 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-xiao
:gpio | (Same) |
2026-06-03
20:59:50 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-devkitc
:buttons | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
20:59:39 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-xiao
:usbnsh | (Unknown) |
2026-06-03
20:59:25 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:coremark | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
20:59:17 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-xiao
:wifi | (Same) |
2026-06-03
20:59:02 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-xiao
:wifi | (Unknown) |
2026-06-03
20:58:57 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-xiao
:nsh | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
20:58:50 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:bmp180 | (Same) |
2026-06-03
20:58:41 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-xiao
:nimble | (Unknown) |
2026-06-03
20:58:31 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-xiao
:gpio | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
20:58:22 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-xiao
:gpio | (Unknown) |
2026-06-03
20:58:15 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:ostest | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
20:58:10 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-xiao
:ble | (Same) |
2026-06-03
20:58:04 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-xiao
:wifi | (Same) |
2026-06-03
20:58:04 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-xiao
:usbnsh | (Unknown) |
2026-06-03
20:57:47 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-xiao
:usbnsh | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
20:57:39 | 3519:
apps:
add missing module metadata for executable t | esp32c6-devkitc
:buttons | (Same) |
2026-06-03
20:57:31 | 3519:
apps:
add missing module metadata for executable t | esp32c3-xiao
:wifi | (Unknown) |
2026-06-03
20:57:26 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-xiao
:gpio | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
20:57:20 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-xiao
:nsh | (Same) |
2026-06-03
20:57:15 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c6-xiao
:nsh | (Same) |
2026-06-03
20:57:12 | 3519:
apps:
add missing module metadata for executable t | esp32c3-xiao
:nimble | (Unknown) |
2026-06-03
20:56:55 | 3519:
apps:
add missing module metadata for executable t | esp32c3-xiao
:gpio | (Same) |
2026-06-03
20:56:52 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-xiao
:smartfs | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
20:56:50 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-xiao
:usbnsh | (Same) |
2026-06-03
20:56:38 | 3519:
apps:
add missing module metadata for executable t | esp32c3-xiao
:usbnsh | (Unknown) |
2026-06-03
20:56:31 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-xiao
:ble | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
20:56:24 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c6-xiao
:nsh | (Same) |
2026-06-03
20:56:11 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:usbconsole | (Same) |
2026-06-03
20:55:56 | 3519:
apps:
add missing module metadata for executable t | esp32c3-xiao
:nsh | (Same) |
2026-06-03
20:55:53 | 3519:
apps:
add missing module metadata for executable t | esp32c6-xiao
:wifi | (Same) |
2026-06-03
20:55:17 | 3519:
apps:
add missing module metadata for executable t | esp32c6-xiao
:gpio | (Same) |
2026-06-03
20:55:09 | 3519:
apps:
add missing module metadata for executable t | esp32c3-xiao
:ble | (Same) |
2026-06-03
20:55:08 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-xiao
:smartfs | (Same) |
2026-06-03
20:55:06 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:spiflash | (Same) |
2026-06-03
20:54:43 | 3519:
apps:
add missing module metadata for executable t | esp32c6-xiao
:usbnsh | (Same) |
2026-06-03
20:54:24 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:usbconsole | (Same) |
2026-06-03
20:54:18 | 3519:
apps:
add missing module metadata for executable t | esp32c6-xiao
:nsh | (Same) |
2026-06-03
20:54:04 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:wifi | (Same) |
2026-06-03
20:53:51 | 3519:
apps:
add missing module metadata for executable t | esp32c3-xiao
:smartfs | (Same) |
2026-06-03
20:53:16 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:spiflash | (Same) |
2026-06-03
20:53:09 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:usbconsole | (Same) |
2026-06-03
20:52:47 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:nimble | (Same) |
2026-06-03
20:52:15 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:wifi | (Same) |
2026-06-03
20:52:04 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:rmt | (Same) |
2026-06-03
20:52:04 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:spiflash | (Same) |
2026-06-03
20:51:14 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:tickless | (Same) |
2026-06-03
20:51:03 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:wifi | (Same) |
2026-06-03
20:50:57 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:nimble | (Same) |
2026-06-03
20:50:32 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:gpio | (Same) |
2026-06-03
20:50:13 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:rmt | (Same) |
2026-06-03
20:49:50 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:timers | (Same) |
2026-06-03
20:49:46 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:nimble | (Same) |
2026-06-03
20:49:22 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:tickless | (Same) |
2026-06-03
20:49:08 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:pwm | (Same) |
2026-06-03
20:49:03 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:rmt | (Same) |
2026-06-03
20:48:39 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:gpio | (Same) |
2026-06-03
20:48:26 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:watchdog | (Same) |
2026-06-03
20:48:12 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:tickless | (Same) |
2026-06-03
20:47:56 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:timers | (Same) |
2026-06-03
20:47:44 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:nsh | (Same) |
2026-06-03
20:47:31 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:gpio | (Same) |
2026-06-03
20:47:13 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:pwm | (Same) |
2026-06-03
20:46:57 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:pm | (Same) |
2026-06-03
20:46:48 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:timers | (Same) |
2026-06-03
20:46:31 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:watchdog | (Same) |
2026-06-03
20:46:16 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | raspberrypi-4b
:nxinit | builtin.c: In function 'init_builtin_run':
##[error]builtin.c:274:1: error: expected declaration or statement at end of input
274 | }
| ^
builtin.c:275: error: control reaches end of non-void function [-Werror=return-type]
cc1: all warnings being treated as errors
make[2]: *** [/github/workspace/sources/apps/Application.mk:239: builtin.c.github.workspace.sources.apps.system.nxinit.o] Error 1
make[2]: Target 'all' not remade because of errors.
make[1]: *** [Makefile:54: /github/worksp |
2026-06-03
20:46:15 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:i2c | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
20:46:07 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:pwm | (Same) |
2026-06-03
20:45:48 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:nsh | (Same) |
2026-06-03
20:45:30 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:i2schar | (Same) |
2026-06-03
20:45:24 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:watchdog | (Same) |
2026-06-03
20:45:01 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:pm | (Same) |
2026-06-03
20:44:47 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:spi | (Same) |
2026-06-03
20:44:42 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:nsh | (Same) |
2026-06-03
20:44:17 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:i2c | (Same) |
2026-06-03
20:43:57 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:sdmmc_spi | (Same) |
2026-06-03
20:43:55 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:pm | (Same) |
2026-06-03
20:43:31 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:i2schar | (Same) |
2026-06-03
20:43:13 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:i2c | (Same) |
2026-06-03
20:42:48 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:spi | (Same) |
2026-06-03
20:42:40 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:ble | (Same) |
2026-06-03
20:42:27 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:i2schar | (Same) |
2026-06-03
20:41:57 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:sdmmc_spi | (Same) |
2026-06-03
20:41:45 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:spi | (Same) |
2026-06-03
20:40:59 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:autopm | (Same) |
2026-06-03
20:40:55 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:sdmmc_spi | (Same) |
2026-06-03
20:40:37 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:ble | (Same) |
2026-06-03
20:40:17 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:adc | (Same) |
2026-06-03
20:39:38 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:ble | (Same) |
2026-06-03
20:39:34 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:romfs | (Same) |
2026-06-03
20:38:55 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:autopm | (Same) |
2026-06-03
20:38:51 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:random | (Same) |
2026-06-03
20:38:12 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:adc | (Same) |
2026-06-03
20:38:09 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:twai | (Same) |
2026-06-03
20:37:57 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:autopm | (Same) |
2026-06-03
20:37:29 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:romfs | (Same) |
2026-06-03
20:37:27 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:mcuboot_nsh | (Same) |
2026-06-03
20:37:15 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:adc | (Same) |
2026-06-03
20:36:45 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:random | (Same) |
2026-06-03
20:36:32 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:romfs | (Same) |
2026-06-03
20:36:19 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:crypto | (Same) |
2026-06-03
20:36:02 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:twai | (Same) |
2026-06-03
20:35:48 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:random | (Same) |
2026-06-03
20:35:37 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:sdm | (Same) |
2026-06-03
20:35:19 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:mcuboot_nsh | (Same) |
2026-06-03
20:35:06 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:twai | (Same) |
2026-06-03
20:34:55 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:temperature_sensor | (Same) |
2026-06-03
20:34:25 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:mcuboot_nsh | (Same) |
2026-06-03
20:34:09 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:crypto | (Same) |
2026-06-03
20:33:50 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:sta_softap | (Same) |
2026-06-03
20:33:25 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:sdm | (Same) |
2026-06-03
20:33:16 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:crypto | (Same) |
2026-06-03
20:32:42 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:temperature_sensor | (Same) |
2026-06-03
20:32:34 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:sdm | (Same) |
2026-06-03
20:31:52 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:temperature_sensor | (Same) |
2026-06-03
20:31:47 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:mcuboot_update_agent | (Same) |
2026-06-03
20:31:35 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:sta_softap | (Same) |
2026-06-03
20:30:46 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:sta_softap | (Same) |
2026-06-03
20:30:41 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:rtc | (Same) |
2026-06-03
20:29:58 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:efuse | (Same) |
2026-06-03
20:29:36 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:mcuboot_update_agent | (Same) |
2026-06-03
20:29:16 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:bmp180 | (Same) |
2026-06-03
20:28:53 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:mcuboot_update_agent | (Same) |
2026-06-03
20:28:34 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:ostest | (Same) |
2026-06-03
20:28:29 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:rtc | (Same) |
2026-06-03
20:27:51 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:buttons | (Same) |
2026-06-03
20:27:47 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:rtc | (Same) |
2026-06-03
20:27:46 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:efuse | (Same) |
2026-06-03
20:27:35 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32-c3-zero
:jumbo | (Unknown) |
2026-06-03
20:27:04 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:efuse | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
20:27:03 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:bmp180 | (Same) |
2026-06-03
20:26:59 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32-c3-zero
:wifi | (Unknown) |
2026-06-03
20:26:41 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32-c3-zero
:usbnsh | (Same) |
2026-06-03
20:26:22 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:bmp180 | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
20:26:21 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:ostest | (Same) |
2026-06-03
20:26:07 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | sim
:lua | me Current
ime
T i m0e 0T i m e 0 C u r r0e n t
Total
%0 R e c e i0 v e d 0 % 0 X f e r d00 A v e0 r a0 g e- - S:0p- e- e: d- - 0-T -i m: e- - : -0 -T i-m--e- : - - : -T-i m-e- : -C-u:r-r-e n-t- |
2026-06-03
20:25:54 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:efuse | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:25:40 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:ostest | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
20:25:37 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32c3-devkit
:buttons | (Same) |
2026-06-03
20:25:33 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:bmp180 | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:25:31 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-xiao
:wifi | (Unknown) |
2026-06-03
20:25:30 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32-c3-zero
:nsh | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
20:25:19 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32-c3-zero
:jumbo | (Unknown) |
2026-06-03
20:25:12 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:ostest | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:25:11 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-xiao
:nimble | (Unknown) |
2026-06-03
20:24:57 | 3519:
apps:
add missing module metadata for executable t | esp32c3-devkit
:buttons | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
20:24:54 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-xiao
:gpio | (Unknown) |
2026-06-03
20:24:53 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32-c3-zero
:sta_softap | (Same) |
2026-06-03
20:24:51 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitm
:buttons | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:24:44 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32-c3-zero
:wifi | (Unknown) |
2026-06-03
20:24:40 | 3519:
apps:
add missing module metadata for executable t | esp32-c3-zero
:jumbo | (Same) |
2026-06-03
20:24:37 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-xiao
:usbnsh | (Same) |
2026-06-03
20:24:31 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:usbconsole | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:24:26 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32-c3-zero
:usbnsh | (Unknown) |
2026-06-03
20:24:17 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-xiao
:nsh | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:24:12 | 3519:
apps:
add missing module metadata for executable t | esp32-c3-zero
:wifi | (Unknown) |
2026-06-03
20:24:10 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:spiflash | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:23:55 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-xiao
:ble | (Same) |
2026-06-03
20:23:54 | 3519:
apps:
add missing module metadata for executable t | esp32-c3-zero
:usbnsh | (Unknown) |
2026-06-03
20:23:42 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:wifi | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:23:34 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-xiao
:smartfs | (Same) |
2026-06-03
20:23:21 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:rmt | (Same) |
2026-06-03
20:23:15 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32-c3-zero
:nsh | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
20:23:14 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:usbconsole | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:23:00 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:tickless | (Same) |
2026-06-03
20:22:54 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:spiflash | (Same) |
2026-06-03
20:22:44 | 3519:
apps:
add missing module metadata for executable t | esp32-c3-zero
:nsh | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
20:22:40 | 3520:
system/nxinit:
fix parser edge cases, SIGCHLD race | esp32-c3-zero
:sta_softap | (Unknown) |
2026-06-03
20:22:39 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:qencoder | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:22:26 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:wifi | (Same) |
2026-06-03
20:22:18 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:gpio | (Same) |
2026-06-03
20:22:16 | 3519:
apps:
add missing module metadata for executable t | esp32-c3-zero
:sta_softap | (Unknown) |
2026-06-03
20:22:05 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:nimble | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:21:57 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:timers | (Same) |
2026-06-03
20:21:44 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:rmt | (Same) |
2026-06-03
20:21:36 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:pwm | (Same) |
2026-06-03
20:21:24 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:tickless | (Same) |
2026-06-03
20:21:15 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:mpu60x0 | (Same) |
2026-06-03
20:21:04 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:gpio | (Same) |
2026-06-03
20:20:54 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:ulp | (Same) |
2026-06-03
20:20:44 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:timers | (Same) |
2026-06-03
20:20:33 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:watchdog | (Same) |
2026-06-03
20:20:24 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:pwm | (Same) |
2026-06-03
20:20:12 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:nsh | (Same) |
2026-06-03
20:20:03 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:watchdog | (Same) |
2026-06-03
20:19:50 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:oa_tc6 | (Same) |
2026-06-03
20:19:43 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:nsh | (Same) |
2026-06-03
20:19:29 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:pm | (Same) |
2026-06-03
20:19:22 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:pm | (Same) |
2026-06-03
20:19:08 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:i2c | (Same) |
2026-06-03
20:19:02 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:i2c | (Same) |
2026-06-03
20:18:47 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:i2schar | In file included from ./common/espressif/esp_i2s.c:53:
11 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./esp_i2s.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sections' '-fdata-sections' '-nostdlib' '-march=rv32imac_zicsr_zifencei' '-mabi= |
2026-06-03
20:18:42 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:i2schar | In file included from ./common/espressif/esp_i2s.c:53:
11 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./esp_i2s.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sections' '-fdata-sections' '-nostdlib' '-march=rv32imc_zicsr_zifencei' '-mabi=i |
2026-06-03
20:18:26 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:spi | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:18:21 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:spi | (Same) |
2026-06-03
20:18:05 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:sdmmc_spi | (Same) |
2026-06-03
20:18:01 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:sdmmc_spi | (Same) |
2026-06-03
20:17:42 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:ble | (Same) |
2026-06-03
20:17:39 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:ble | (Same) |
2026-06-03
20:17:14 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:autopm | (Same) |
2026-06-03
20:17:12 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:autopm | (Same) |
2026-06-03
20:16:53 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:adc | (Same) |
2026-06-03
20:16:52 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:adc | (Same) |
2026-06-03
20:16:32 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:romfs | (Same) |
2026-06-03
20:16:30 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:romfs | (Same) |
2026-06-03
20:16:11 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:motor | (Same) |
2026-06-03
20:16:09 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:random | (Same) |
2026-06-03
20:15:50 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:random | (Same) |
2026-06-03
20:15:47 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:twai | (Same) |
2026-06-03
20:15:29 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:capture | (Same) |
2026-06-03
20:15:26 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:mcuboot_nsh | (Same) |
2026-06-03
20:15:07 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:twai | (Same) |
2026-06-03
20:15:04 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:crypto | (Same) |
2026-06-03
20:14:47 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:mcuboot_nsh | (Same) |
2026-06-03
20:14:43 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:sdm | (Same) |
2026-06-03
20:14:25 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:spislv | (Same) |
2026-06-03
20:14:21 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:temperature_sensor | (Same) |
2026-06-03
20:14:05 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | rv-virt
:citest | In file included from /github/workspace/sources/nuttx/include/libcxx/__filesystem/filesystem_error.h:15,
from /github/workspace/sources/nuttx/include/libcxx/__filesystem/directory_entry.h:20,
from /github/workspace/sources/nuttx/include/libcxx/filesystem:539,
from /github/workspace/sources/nuttx/include/libcxx/fstream:192,
from libcxx/libcxx/src/ios.instantiations.cpp:10:
##[error]/github/workspace/sources/nuttx/include/libcxx/__filesystem/path.h:623:30: error: use of built-in trait '__decay( |
2026-06-03
20:14:04 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:crypto | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:13:52 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:sta_softap | (Same) |
2026-06-03
20:13:43 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:sdm | (Same) |
2026-06-03
20:13:25 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-legacy-devkit
:cxx | In file included from /github/workspace/sources/nuttx/include/libcxx/__filesystem/filesystem_error.h:15,
from /github/workspace/sources/nuttx/include/libcxx/__filesystem/directory_entry.h:20,
from /github/workspace/sources/nuttx/include/libcxx/filesystem:539,
from /github/workspace/sources/nuttx/include/libcxx/fstream:192,
from libcxx/libcxx/src/ios.instantiations.cpp:10:
##[error]/github/workspace/sources/nuttx/include/libcxx/__filesystem/path.h:623:30: error: use of built-in trait '__decay( |
2026-06-03
20:13:21 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:temperature_sensor | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:13:14 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:mcuboot_update_agent | (Same) |
2026-06-03
20:12:53 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:rtc | (Same) |
2026-06-03
20:12:53 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:sta_softap | (Same) |
2026-06-03
20:12:31 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:efuse | (Same) |
2026-06-03
20:12:24 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:mcuboot_update_agent | (Same) |
2026-06-03
20:12:09 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:bmp180 | (Same) |
2026-06-03
20:12:03 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:rtc | (Same) |
2026-06-03
20:11:47 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:ostest | (Same) |
2026-06-03
20:11:42 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:efuse | (Same) |
2026-06-03
20:11:27 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c3-devkit
:buttons | (Same) |
2026-06-03
20:11:21 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:coremark | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-O3' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:11:09 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32-c3-zero
:jumbo | (Unknown) |
2026-06-03
20:11:00 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:bmp180 | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:10:39 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32-c3-zero
:wifi | (Unknown) |
2026-06-03
20:10:38 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:ostest | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:10:20 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32-c3-zero
:usbnsh | (Unknown) |
2026-06-03
20:10:17 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-devkitc
:buttons | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:09:58 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32-devkitc
:crypto | hash.c: In function 'hash_main':
##[error]hash.c:1081:3: error: 'huge_block' may be used uninitialized [-Werror=maybe-uninitialized]
1081 | free(huge_block);
| ^~~~~~~~~~~~~~~~
hash.c:913:18: note: 'huge_block' was declared here
913 | unsigned char *huge_block = NULL;
| ^~~~~~~~~~
cc1: all warnings being treated as errors
make[2]: *** [/github/workspace/sources/apps/Application.mk:330: hash.c.github.workspace.sources.apps.testing.drivers.crypto.o] Error 1
ma |
2026-06-03
20:09:57 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32-c3-zero
:nsh | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:09:32 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-xiao
:wifi | (Same) |
2026-06-03
20:09:29 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32-c3-zero
:sta_softap | (Unknown) |
2026-06-03
20:09:11 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-xiao
:gpio | ./chip/esp-hal-3rdparty/components/upper_hal_i2s/i2s_common.c:10:10: fatal error: freertos/FreeRTOS.h: No such file or directory
10 | #include "freertos/FreeRTOS.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
ERROR: riscv-none-elf-gcc failed: 1
command: riscv-none-elf-gcc -MT ./i2s_common.o -M '-fno-common' '-Wall' '-Wstrict-prototypes' '-Wshadow' '-Wundef' '-Wno-attributes' '-Wno-unknown-pragmas' '-Wno-psabi' '-Os' '-fno-strict-aliasing' '-fomit-frame-pointer' '-ffunction-sec |
2026-06-03
20:08:50 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-xiao
:usbnsh | (Same) |
2026-06-03
20:08:29 | 19033:
arch/risc-v/espressif:
Port I2S driver to esp-hal | esp32c6-xiao
:nsh | (Same) |
2026-06-03
19:52:32 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-xiao
:wifi | (Unknown) |
2026-06-03
19:52:11 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-xiao
:nimble | (Same) |
2026-06-03
19:51:54 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-xiao
:gpio | (Same) |
2026-06-03
19:51:36 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-xiao
:usbnsh | (Same) |
2026-06-03
19:50:53 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-xiao
:nsh | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
19:50:04 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-xiao
:ble | (Same) |
2026-06-03
19:48:40 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-xiao
:smartfs | (Same) |
2026-06-03
19:47:58 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:usbconsole | (Same) |
2026-06-03
19:46:49 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:spiflash | (Same) |
2026-06-03
19:45:42 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:wifi | (Same) |
2026-06-03
19:44:22 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:nimble | (Same) |
2026-06-03
19:43:38 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:rmt | (Same) |
2026-06-03
19:42:46 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:tickless | (Same) |
2026-06-03
19:42:04 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:gpio | (Same) |
2026-06-03
19:41:21 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:timers | (Same) |
2026-06-03
19:40:39 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:pwm | (Same) |
2026-06-03
19:39:57 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:watchdog | (Same) |
2026-06-03
19:39:14 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:nsh | (Same) |
2026-06-03
19:38:28 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:pm | (Same) |
2026-06-03
19:37:44 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:i2c | (Same) |
2026-06-03
19:36:59 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:i2schar | (Same) |
2026-06-03
19:36:16 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:spi | (Same) |
2026-06-03
19:35:23 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:sdmmc_spi | (Same) |
2026-06-03
19:34:01 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:ble | (Same) |
2026-06-03
19:32:13 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:autopm | (Same) |
2026-06-03
19:31:29 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:adc | (Same) |
2026-06-03
19:30:44 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:romfs | (Same) |
2026-06-03
19:29:59 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:random | (Same) |
2026-06-03
19:29:16 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:twai | (Same) |
2026-06-03
19:28:34 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:mcuboot_nsh | (Same) |
2026-06-03
19:27:22 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:crypto | (Same) |
2026-06-03
19:26:39 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:sdm | (Same) |
2026-06-03
19:25:56 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:temperature_sensor | (Same) |
2026-06-03
19:24:50 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:sta_softap | (Same) |
2026-06-03
19:22:54 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:mcuboot_update_agent | (Same) |
2026-06-03
19:21:45 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:rtc | (Same) |
2026-06-03
19:21:01 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:efuse | (Same) |
2026-06-03
19:20:16 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:bmp180 | (Same) |
2026-06-03
19:19:33 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:ostest | (Same) |
2026-06-03
19:18:48 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32c3-devkit
:buttons | (Same) |
2026-06-03
19:18:30 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32-c3-zero
:jumbo | (Unknown) |
2026-06-03
19:18:00 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32-c3-zero
:wifi | (Same) |
2026-06-03
19:17:42 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32-c3-zero
:usbnsh | (Same) |
2026-06-03
19:16:29 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32-c3-zero
:nsh | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
19:16:01 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32-c3-zero
:sta_softap | (Unknown) |
2026-06-03
16:58:54 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-legacy-devkit
:cxx | In file included from /github/workspace/sources/nuttx/include/libcxx/__filesystem/filesystem_error.h:15,
from /github/workspace/sources/nuttx/include/libcxx/__filesystem/directory_entry.h:20,
from /github/workspace/sources/nuttx/include/libcxx/filesystem:539,
from /github/workspace/sources/nuttx/include/libcxx/fstream:192,
from libcxx/libcxx/src/ios.instantiations.cpp:10:
##[error]/github/workspace/sources/nuttx/include/libcxx/__filesystem/path.h:623:30: error: use of built-in trait '__decay( |
2026-06-03
16:37:46 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-xiao
:wifi | (Unknown) |
2026-06-03
16:37:26 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-xiao
:nimble | (Same) |
2026-06-03
16:37:09 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-xiao
:gpio | (Same) |
2026-06-03
16:36:52 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-xiao
:usbnsh | (Same) |
2026-06-03
16:36:09 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-xiao
:nsh | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
16:35:21 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-xiao
:ble | (Same) |
2026-06-03
16:35:01 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-legacy-devkit
:cxx | In file included from /github/workspace/sources/nuttx/include/libcxx/__filesystem/filesystem_error.h:15,
from /github/workspace/sources/nuttx/include/libcxx/__filesystem/directory_entry.h:20,
from /github/workspace/sources/nuttx/include/libcxx/filesystem:539,
from /github/workspace/sources/nuttx/include/libcxx/fstream:192,
from libcxx/libcxx/src/ios.instantiations.cpp:10:
##[error]/github/workspace/sources/nuttx/include/libcxx/__filesystem/path.h:623:30: error: use of built-in trait '__decay( |
2026-06-03
16:33:59 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-xiao
:smartfs | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
16:33:17 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:usbconsole | (Same) |
2026-06-03
16:32:08 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:spiflash | (Same) |
2026-06-03
16:31:05 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:wifi | (Same) |
2026-06-03
16:29:43 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:nimble | (Same) |
2026-06-03
16:28:59 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:rmt | (Same) |
2026-06-03
16:28:07 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:tickless | (Same) |
2026-06-03
16:27:24 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:gpio | (Same) |
2026-06-03
16:26:41 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:timers | (Same) |
2026-06-03
16:25:57 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:pwm | (Same) |
2026-06-03
16:25:13 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:watchdog | (Same) |
2026-06-03
16:24:29 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:nsh | (Same) |
2026-06-03
16:23:41 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:pm | (Same) |
2026-06-03
16:22:57 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:i2c | (Same) |
2026-06-03
16:22:11 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:i2schar | (Same) |
2026-06-03
16:21:27 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:spi | (Same) |
2026-06-03
16:20:35 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:sdmmc_spi | (Same) |
2026-06-03
16:19:15 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:ble | (Same) |
2026-06-03
16:17:30 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:autopm | (Same) |
2026-06-03
16:16:46 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:adc | (Same) |
2026-06-03
16:16:02 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:romfs | (Same) |
2026-06-03
16:15:18 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:random | (Same) |
2026-06-03
16:14:34 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:twai | (Same) |
2026-06-03
16:14:06 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-xiao
:wifi | (Unknown) |
2026-06-03
16:13:52 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:mcuboot_nsh | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
16:13:45 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-xiao
:nimble | (Unknown) |
2026-06-03
16:13:28 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-xiao
:gpio | (Same) |
2026-06-03
16:13:10 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-xiao
:usbnsh | (Same) |
2026-06-03
16:12:42 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:crypto | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
16:12:26 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-xiao
:nsh | (Same) |
2026-06-03
16:11:59 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:sdm | (Same) |
2026-06-03
16:11:37 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-xiao
:ble | (Same) |
2026-06-03
16:11:16 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:temperature_sensor | (Same) |
2026-06-03
16:10:18 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-xiao
:smartfs | (Same) |
2026-06-03
16:10:09 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:sta_softap | (Same) |
2026-06-03
16:09:35 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:usbconsole | (Same) |
2026-06-03
16:08:28 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:spiflash | (Same) |
2026-06-03
16:08:06 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:mcuboot_update_agent | (Same) |
2026-06-03
16:07:25 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:wifi | (Same) |
2026-06-03
16:06:58 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:rtc | (Same) |
2026-06-03
16:06:14 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:efuse | (Same) |
2026-06-03
16:06:05 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:nimble | (Same) |
2026-06-03
16:05:30 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:bmp180 | (Same) |
2026-06-03
16:05:20 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:rmt | (Same) |
2026-06-03
16:04:48 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:ostest | (Same) |
2026-06-03
16:04:28 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:tickless | (Same) |
2026-06-03
16:04:04 | 19024:
libs/libc/time:
Add configuration options for the | esp32c3-devkit
:buttons | (Same) |
2026-06-03
16:03:46 | 19024:
libs/libc/time:
Add configuration options for the | esp32-c3-zero
:jumbo | (Unknown) |
2026-06-03
16:03:45 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:gpio | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
16:03:13 | 19024:
libs/libc/time:
Add configuration options for the | esp32-c3-zero
:wifi | (Unknown) |
2026-06-03
16:03:01 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:timers | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
16:02:54 | 19024:
libs/libc/time:
Add configuration options for the | esp32-c3-zero
:usbnsh | (Unknown) |
2026-06-03
16:02:18 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:pwm | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
16:01:40 | 19024:
libs/libc/time:
Add configuration options for the | esp32-c3-zero
:nsh | (Same) |
2026-06-03
16:01:34 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:watchdog | (Same) |
2026-06-03
16:01:07 | 19024:
libs/libc/time:
Add configuration options for the | esp32-c3-zero
:sta_softap | (Unknown) |
2026-06-03
16:00:51 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:nsh | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
16:00:02 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:pm | (Same) |
2026-06-03
15:59:41 | 19024:
libs/libc/time:
Add configuration options for the | sim
:lua | S p e n t L e f t S p e e d
0 D l o a d0 U p l0o a d 0T 0 %0 T o t a l0 % R0e c-ei-v:e-d- :%- -Xf e-r-d: - -A:v-e-r a-g-e: -S-p:e-e-d T i0me Time Time Current |
2026-06-03
15:59:18 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:i2c | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
15:58:30 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:i2schar | (Same) |
2026-06-03
15:57:46 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:spi | (Same) |
2026-06-03
15:56:54 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:sdmmc_spi | (Same) |
2026-06-03
15:55:34 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:ble | (Same) |
2026-06-03
15:53:50 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:autopm | (Same) |
2026-06-03
15:53:06 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:adc | (Same) |
2026-06-03
15:52:22 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:romfs | (Same) |
2026-06-03
15:51:37 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:random | (Same) |
2026-06-03
15:50:54 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:twai | (Same) |
2026-06-03
15:50:11 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:mcuboot_nsh | (Same) |
2026-06-03
15:49:02 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:crypto | (Same) |
2026-06-03
15:48:19 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:sdm | (Same) |
2026-06-03
15:47:36 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:temperature_sensor | (Same) |
2026-06-03
15:46:29 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:sta_softap | (Same) |
2026-06-03
15:44:26 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:mcuboot_update_agent | (Same) |
2026-06-03
15:43:17 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:rtc | (Same) |
2026-06-03
15:42:32 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:efuse | (Same) |
2026-06-03
15:41:47 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:bmp180 | (Same) |
2026-06-03
15:41:03 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:ostest | (Same) |
2026-06-03
15:40:18 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32c3-devkit
:buttons | (Same) |
2026-06-03
15:39:59 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32-c3-zero
:jumbo | (Unknown) |
2026-06-03
15:39:20 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32-c3-zero
:wifi | (Same) |
2026-06-03
15:39:01 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32-c3-zero
:usbnsh | (Same) |
2026-06-03
15:37:48 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32-c3-zero
:nsh | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
15:37:09 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32-c3-zero
:sta_softap | (Unknown) |
2026-06-03
12:27:45 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c6-devkitc
:twai | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
12:27:00 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c6-devkitc
:mcuboot_nsh | (Same) |
2026-06-03
12:26:30 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c3-devkit
:autopm | (Same) |
2026-06-03
12:26:11 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c6-devkitc
:spislv | In file included from board/esp32c6_bringup.c:41:
23 | #ifndef __BOARDS_RISCV_ESP32C6_COMMON_INCLUDE_ESP_BOARD_I2C_H
24 | #define __BOARDS_RISCV_ESP32C3_COMMON_INCLUDE_ESP_BOARD_I2C_H
cc1: all warnings being treated as errors
make[1]: *** [/github/workspace/sources/nuttx/boards/Board.mk:100: esp32c6_bringup.o] Error 1
make[1]: Target 'libboard.a' not remade because of errors.
make: *** [tools/LibTargets.mk:89: arch/risc-v/src/board/libboard.a] Error 2
##[error]chip/esp-hal-3rdparty/comp |
2026-06-03
12:25:48 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c3-devkit
:adc | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
12:25:04 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c3-devkit
:romfs | (Same) |
2026-06-03
12:24:56 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c6-devkitc
:crypto | (Same) |
2026-06-03
12:24:21 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c3-devkit
:random | (Same) |
2026-06-03
12:24:08 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c6-devkitc
:sdm | (Same) |
2026-06-03
12:23:39 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c3-devkit
:twai | (Same) |
2026-06-03
12:23:20 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c6-devkitc
:temperature_sensor | (Same) |
2026-06-03
12:22:58 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c3-devkit
:mcuboot_nsh | (Same) |
2026-06-03
12:22:11 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c6-devkitc
:sta_softap | (Same) |
2026-06-03
12:21:47 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c3-devkit
:crypto | (Same) |
2026-06-03
12:21:05 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c3-devkit
:sdm | (Same) |
2026-06-03
12:21:01 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c6-devkitc
:mcuboot_update_agent | (Same) |
2026-06-03
12:20:22 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c3-devkit
:temperature_sensor | (Same) |
2026-06-03
12:19:51 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c6-devkitc
:rtc | (Same) |
2026-06-03
12:19:17 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c3-devkit
:sta_softap | (Same) |
2026-06-03
12:19:04 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c6-devkitc
:efuse | (Same) |
2026-06-03
12:17:50 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c6-devkitc
:coremark | (Same) |
2026-06-03
12:17:20 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c3-devkit
:mcuboot_update_agent | (Same) |
2026-06-03
12:17:05 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c6-devkitc
:bmp180 | (Same) |
2026-06-03
12:16:38 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | rv-virt
:citest | In file included from /github/workspace/sources/nuttx/include/libcxx/__filesystem/filesystem_error.h:15,
from /github/workspace/sources/nuttx/include/libcxx/__filesystem/directory_entry.h:20,
from /github/workspace/sources/nuttx/include/libcxx/filesystem:539,
from /github/workspace/sources/nuttx/include/libcxx/fstream:192,
from libcxx/libcxx/src/ios.instantiations.cpp:10:
##[error]/github/workspace/sources/nuttx/include/libcxx/__filesystem/path.h:623:30: error: use of built-in trait '__decay( |
2026-06-03
12:16:21 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c6-devkitc
:ostest | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
12:16:13 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c3-devkit
:rtc | (Same) |
2026-06-03
12:15:36 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c6-devkitc
:buttons | (Same) |
2026-06-03
12:15:30 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c3-devkit
:efuse | (Same) |
2026-06-03
12:14:47 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c3-devkit
:bmp180 | (Same) |
2026-06-03
12:14:06 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c3-devkit
:ostest | (Same) |
2026-06-03
12:13:36 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c6-xiao
:wifi | (Same) |
2026-06-03
12:13:22 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c3-devkit
:buttons | (Same) |
2026-06-03
12:13:05 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32-c3-zero
:jumbo | (Unknown) |
2026-06-03
12:12:51 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c6-xiao
:gpio | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
12:12:36 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32-c3-zero
:wifi | (Unknown) |
2026-06-03
12:12:17 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32-c3-zero
:usbnsh | (Same) |
2026-06-03
12:12:08 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c6-xiao
:usbnsh | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
12:12:03 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | rv-virt
:kfb64 | 0xc010127c |
2026-06-03
12:11:36 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32c6-xiao
:nsh | ##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio_reserve.c:13:47: error: implicit declaration of function 'ATOMIC_VAR_INIT'; did you mean 'ATOMIC_FLAG_INIT'? [-Wimplicit-function-declaration]
13 | static _Atomic uint64_t s_reserved_pin_mask = ATOMIC_VAR_INIT(~(SOC_GPIO_VALID_GPIO_MASK));
| ^~~~~~~~~~~~~~~
| ATOMIC_FLAG_INIT
##[error]chip/esp-hal-3rdparty/components/esp_hw_support/esp_gpio |
2026-06-03
12:11:04 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32-c3-zero
:nsh | (Same) |
2026-06-03
12:10:35 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | esp32-c3-zero
:sta_softap | (Unknown) |
2026-06-03
12:03:27 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | gd32f470zk-eval
:fmclfsnsh | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[1]: *** [littlefs/Make.defs:68: .littlefsunpack] Error 2
make[1]: Target 'context' not remade because of errors.
make: *** [tools/Unix.mk:471: fs/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-06-03
11:22:13 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | sim
:lua | l % R e c e i v e d % X f e r d A v e r a g e SDpleoeadd UTpilmoea d TTiomtea l STpiemnet C u rLreefntt
S p eed |
2026-06-03
10:37:06 | 19024:
libs/libc/time:
Add configuration options for the | esp32p4-function-ev-board
:watchdog | Killing pytest after timeout... |
2026-06-03
10:25:29 | 19024:
libs/libc/time:
Add configuration options for the | stm32f103-minimum
:adb | Spee
d |
2026-06-03
10:03:47 | 19031:
drivers/segger:
Download systemview from NuttX Mir | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-03
09:50:18 | 19031:
drivers/segger:
Download systemview from NuttX Mir | esp32p4-function-ev-board
:timers | (Same) |
2026-06-03
09:16:11 | 19031:
drivers/segger:
Download systemview from NuttX Mir | rv-virt
:nsbi | 0xc0101261 adjusted to 0xc0101264 |
2026-06-03
08:18:55 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32-wrover-kit
:wifi | Killing pytest after timeout... |
2026-06-03
08:06:04 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | thingy91
:nsh_rtt | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of segger/SystemView_Src_V356.zip or
segger/SystemView_Src_V356.zip.zip, and cannot find segger/SystemView_Src_V356.zip.ZIP, period.
make[1]: *** [segger/Make.defs:84: segger/SystemView_Src_V"356".zip |
2026-06-03
08:02:11 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | stm32f103-minimum
:adb | d |
2026-06-03
07:40:36 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | thingy52
:nsh | CMake Error at /github/workspace/sources/nuttx/build/_deps/systemview-subbuild/systemview-populate-prefix/src/systemview-populate-stamp/download-systemview-populate.cmake:170 (message):
Each download failed!
error: downloading 'https://www.segger.com/downloads/systemview/SystemView_Src_V356.zip' failed
status_code: 22
status_string: "HTTP response code said error"
log:
--- LOG BEGIN ---
Trying 3.167.99.11:443...
Connected to www.segger.com (3.167.99.11) port 443 (#0)
ALPN: offer |
2026-06-03
07:37:41 | 19031:
drivers/segger:
Download systemview from NuttX Mir | sim
:lua | Spent Left Speed |
2026-06-03
07:34:53 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | nrf52832-dk
:nxscope_rtt | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of segger/SystemView_Src_V356.zip or
segger/SystemView_Src_V356.zip.zip, and cannot find segger/SystemView_Src_V356.zip.ZIP, period.
make[1]: *** [segger/Make.defs:84: segger/SystemView_Src_V"356".zip |
2026-06-03
07:31:52 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | nrf52832-dk
:nxscope_uart | (Same) |
2026-06-03
07:23:08 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | raspberrypi-pico-2-rv
:usbnsh-smp | {standard input}: Assembler messages:
{standard input}:149: Error: unrecognized opcode `cm.mva01s s3,s1'
{standard input}:266: Error: unrecognized opcode `cm.mva01s s3,s2'
{standard input}:480: Error: unrecognized opcode `cm.mvsa01 s5,s2'
{standard input}:551: Error: unrecognized opcode `cm.mva01s s3,s2'
{standard input}:592: Error: unrecognized opcode `cm.mva01s s3,s2'
make[1]: *** [Makefile:108: losetup.o] Error 1
{standard input}: Assembler messages:
{standard input}:32: Error: un |
2026-06-03
07:13:13 | 19024:
libs/libc/time:
Add configuration options for the | thingy91
:nsh_rtt | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of segger/SystemView_Src_V356.zip or
segger/SystemView_Src_V356.zip.zip, and cannot find segger/SystemView_Src_V356.zip.ZIP, period.
make[1]: *** [segger/Make.defs:84: segger/SystemView_Src_V"356".zip |
2026-06-03
07:13:02 | 19024:
libs/libc/time:
Add configuration options for the | stm32f103-minimum
:adb | i m e C u r r e n t
D l o a d U p lDolaoda d TUoptlaola d S pTeontta l LSepfetn t S p e eLde
ft
S p e0e d |
2026-06-03
06:46:29 | 19024:
libs/libc/time:
Add configuration options for the | thingy52
:nsh | CMake Error at /github/workspace/sources/nuttx/build/_deps/systemview-subbuild/systemview-populate-prefix/src/systemview-populate-stamp/download-systemview-populate.cmake:170 (message):
Each download failed!
error: downloading 'https://www.segger.com/downloads/systemview/SystemView_Src_V356.zip' failed
status_code: 22
status_string: "HTTP response code said error"
log:
--- LOG BEGIN ---
Trying 3.167.99.11:443...
Connected to www.segger.com (3.167.99.11) port 443 (#0)
ALPN: offer |
2026-06-03
06:40:31 | 19024:
libs/libc/time:
Add configuration options for the | nrf52832-dk
:nxscope_rtt | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of segger/SystemView_Src_V356.zip or
segger/SystemView_Src_V356.zip.zip, and cannot find segger/SystemView_Src_V356.zip.ZIP, period.
make[1]: *** [segger/Make.defs:84: segger/SystemView_Src_V"356".zip |
2026-06-03
06:37:20 | 19024:
libs/libc/time:
Add configuration options for the | nrf52832-dk
:nxscope_uart | (Same) |
2026-06-03
06:28:17 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | sim
:lua | % T%o tTaol t a l % R e c%e iRveecde i%v eXdf e%r d X fAevredr a gAev eSrpaegeed S p eTeidm e T i mTei m e T i mTei m e CTuirmree n tC
u r r e n t
--:
0 % Total % Received % Xferd Average Speed Time Time Time Current |
2026-06-03
06:27:26 | 19029:
cmake/nuttx_toolchain.cmake:
track preprocessed in | at32f437-mini
:systemview | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of segger/SystemView_Src_V356.zip or
segger/SystemView_Src_V356.zip.zip, and cannot find segger/SystemView_Src_V356.zip.ZIP, period.
make[1]: *** [segger/Make.defs:84: segger/SystemView_Src_V"356".zip |
2026-06-03
06:16:36 | 19029:
cmake/nuttx_toolchain.cmake:
track preprocessed in | esp32-c3-zero
:wifi | (Unknown) |
2026-06-03
06:00:47 | 19024:
libs/libc/time:
Add configuration options for the | esp32s3-korvo-2
:rtptools | Current |
2026-06-03
05:36:58 | 19024:
libs/libc/time:
Add configuration options for the | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAvveerraaggee SSppeeeedd TTiimmee TTiimmee TTiimmee CCuurrrreenntt
D lDolaoda d U pUlpolao daA dv e rT oaTtgoaetl a Sl p e Se pdSe n pt e Tn it m e L e f Lt e Tf itSm pe e Se pd e
e dT
i m e
0 C0 u r r 0e n t0 |
2026-06-03
05:08:23 | 19029:
cmake/nuttx_toolchain.cmake:
track preprocessed in | stm32f429i-disco
:systemview | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of segger/SystemView_Src_V356.zip or
segger/SystemView_Src_V356.zip.zip, and cannot find segger/SystemView_Src_V356.zip.ZIP, period.
make[1]: *** [segger/Make.defs:84: segger/SystemView_Src_V"356".zip |
2026-06-03
04:47:02 | 19029:
cmake/nuttx_toolchain.cmake:
track preprocessed in | stm32f103-minimum
:adb | d |
2026-06-03
04:05:45 | 3511:
system/popen:
Avoid copying FILE | stm32f429i-disco
:systemview | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of segger/SystemView_Src_V356.zip or
segger/SystemView_Src_V356.zip.zip, and cannot find segger/SystemView_Src_V356.zip.ZIP, period.
make[1]: *** [segger/Make.defs:84: segger/SystemView_Src_V"356".zip |
2026-06-03
03:15:18 | 19029:
cmake/nuttx_toolchain.cmake:
track preprocessed in | sim
:lua | A v e r a g e S p e e d T i m e T i m e DTliomea d C uUrprleonatd
T o t a l S p e n t L e f t S p e e d
Dl
o a d0 U p l o0a d 0T o t a l 0 S p e n0t L0e f t S p0e e d |
2026-06-03
02:49:43 | 19029:
cmake/nuttx_toolchain.cmake:
track preprocessed in | sim
:lua | T i m e T i m e T i m e C u r r e n t
D l o a d U p l o a d T o t a l S p eDnlto a d LUepflto a dS p e eTd
--: |
2026-06-03
02:11:08 | 3511:
system/popen:
Avoid copying FILE | sim
:lua | T i m e C u r r e n t
D l o a d U p l o a d D l oTaodt a lU p l oSapde n t T o t aLle f t S p eSnpte e d
Lef
t 0S p e e d
%D Tlootaadl U p l%o aRde c e iTvoetda l% X f eSrpde n tA v e r aLgeef tS p eSepde e d
Time
0 T i m e 0 T0i m e C0u rr e n t0 |
2026-06-03
01:43:57 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | nucleo-f446re
:systemview | CMake Error at /github/workspace/sources/nuttx/build/_deps/systemview-subbuild/systemview-populate-prefix/src/systemview-populate-stamp/download-systemview-populate.cmake:170 (message):
Each download failed!
error: downloading 'https://www.segger.com/downloads/systemview/SystemView_Src_V356.zip' failed
status_code: 22
status_string: "HTTP response code said error"
log:
--- LOG BEGIN ---
Trying 3.167.99.74:443...
Connected to www.segger.com (3.167.99.74) port 443 (#0)
ALPN: offer |
2026-06-03
01:04:28 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | esp32-devkitc
:crypto | hash.c: In function 'hash_main':
##[error]hash.c:1081:3: error: 'huge_block' may be used uninitialized [-Werror=maybe-uninitialized]
1081 | free(huge_block);
| ^~~~~~~~~~~~~~~~
hash.c:913:18: note: 'huge_block' was declared here
913 | unsigned char *huge_block;
| ^~~~~~~~~~
cc1: all warnings being treated as errors
make[2]: *** [/github/workspace/sources/apps/Application.mk:330: hash.c.github.workspace.sources.apps.testing.drivers.crypto.o] Error 1
make[2]: |
2026-06-03
00:48:38 | 19027:
docs:
Fix duplicate toctree references causing bui | sim
:lua | eed |
2026-06-03
00:21:16 | 3517:
testing/drivers/hash:
Add unaligned buffer size te | sim
:lua | T
i m e0 T i m0e 0 T i m e 0 C u r r0e n t
t a l S p e n t L e f t S p e e d
D0l o a d 0U p lo a d0 T o t0a 0 l0 S p e n0t L e fp0tl o- a-Sd:p -e -e :dT-
o- t-a-l:
- - : --0S p-- e: n- t- :0- - L e 0f0 t S p0e e d |
2026-06-02
23:45:22 | 19027:
docs:
Fix duplicate toctree references causing bui | sim
:lua | r r e n t
D l o a d U p l o a d T o t aDll o a dS p eUnptl o a d L e fTto t aSlp e e dS
pen |
2026-06-02
22:33:15 | 19026:
arch/risc-v/rp23xx-rv:
Add SMP support for dual Ha | raspberrypi-pico-2-rv
:usbnsh-smp | {standard input}: Assembler messages:
{standard input}:149: Error: unrecognized opcode `cm.mva01s s3,s1'
{standard input}:266: Error: unrecognized opcode `cm.mva01s s3,s2'
{standard input}:480: Error: unrecognized opcode `cm.mvsa01 s5,s2'
{standard input}:551: Error: unrecognized opcode `cm.mva01s s3,s2'
{standard input}:592: Error: unrecognized opcode `cm.mva01s s3,s2'
make[1]: *** [Makefile:108: losetup.o] Error 1
{standard input}: Assembler messages:
{standard input}:596: Error: u |
2026-06-02
21:29:03 | 3528:
workflows/build.yml:
Fix Skipping sim\windows in t | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-02
21:14:03 | 3528:
workflows/build.yml:
Fix Skipping sim\windows in t | esp32p4-function-ev-board
:pwm | (Same) |
2026-06-02
20:24:03 | 19024:
libs/libc/time:
Add configuration options for the | esp32s3-devkit
:toywasm | (Same) |
2026-06-02
20:16:40 | 19024:
libs/libc/time:
Add configuration options for the | esp32p4-function-ev-board
:nsh | (Same) |
2026-06-02
19:32:36 | 19024:
libs/libc/time:
Add configuration options for the | stm32f103-minimum
:adb | e r d A v e r a g e S p e e d T i m e T i m e D l o a dT i mUep l oCaudr r e nTto
t a l S p e n t L e f t S p e e d
D l0o a d U0p l o a d0 T o t0a l 0S p e n t 0 L e f t0 S p e e d0
--:-- |
2026-06-02
18:55:27 | 3528:
workflows/build.yml:
Fix Skipping sim\windows in t | sim
:lua | % R e c e i v e d % X f%e r Tdo t a Al v e r a g% e RS ep ce ee id v e d D T%i mXef e r d T iAmvee r Time Current |
2026-06-02
17:21:52 | 19024:
libs/libc/time:
Add configuration options for the | sim
:lua | n t
Dlo a d UDpllooaadd U pTlootaadl STpoteanlt SLpeefntt S p eLeedf
t S
p e e0d
eed Time Time Time Cur |
2026-06-02
15:30:54 | 19024:
libs/libc/time:
Add configuration options for the | esp32s3-devkit
:toywasm | ime Current |
2026-06-02
15:28:43 | 19024:
libs/libc/time:
Add configuration options for the | esp32s3-devkit
:fastboot | Killing pytest after timeout... |
2026-06-02
15:16:34 | 19024:
libs/libc/time:
Add configuration options for the | esp32p4-function-ev-board
:pwm | (Same) |
2026-06-02
13:28:00 | 19020:
drivers/mmcsd:
Remove eMMC partitions when !CONFIG | esp32s3-devkit
:toywasm | (Same) |
2026-06-02
13:25:13 | 19021:
boards/lckfb-szpi-esp32s3:
switch adb config to nx | esp32s3-devkit
:toywasm | (Same) |
2026-06-02
13:19:42 | 3516:
testing/drivers/crypto:
Fix typo on hash test | esp32s3-devkit
:adb | D l o a d U p l o a d T o t a l SDpleonatd U pLleofatd S pTeoetda
l
S p e0n t L0e f t 0S p e e d |
2026-06-02
13:16:56 | 3516:
testing/drivers/crypto:
Fix typo on hash test | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-02
13:15:13 | 19020:
drivers/mmcsd:
Remove eMMC partitions when !CONFIG | esp32p4-function-ev-board
:sdm | (Same) |
2026-06-02
13:05:20 | 3516:
testing/drivers/crypto:
Fix typo on hash test | esp32p4-function-ev-board
:timers | (Same) |
2026-06-02
13:04:25 | 19024:
libs/libc/time:
Add configuration options for the | sim
:lua | i m e T i m e C u r r e n t
D l o a d U p l o a d T o t a l D l oSpent Left Speed
T i0m e 0 T i m e0 Current |
2026-06-02
12:56:54 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-02
12:48:25 | 3515:
system/popen:
add dpopen/dpclose fd-based interfac | esp32s3-devkit
:fastboot | (Same) |
2026-06-02
12:46:29 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32p4-function-ev-board
:crypto | (Same) |
2026-06-02
12:40:13 | 19023:
boards/arm/stm32/nucleo:
Fix BBSRAM compilation | stm32f103-minimum
:adb | T i m e C u r r e n t
D l o a d U pl o ad T o t a l S p Dloeandt U p lLoeafdt STpoeteadl
Sp
en t 0 L e ft 0 S p e e0 0 0 0 0 d
0 - |
2026-06-02
12:35:09 | 3515:
system/popen:
add dpopen/dpclose fd-based interfac | esp32p4-function-ev-board
:timers | Killing pytest after timeout... |
2026-06-02
12:28:09 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | esp32-sparrow-kit
:mqttc | (Same) |
2026-06-02
12:03:06 | 3515:
system/popen:
add dpopen/dpclose fd-based interfac | stm32f103-minimum
:adb | r e n t
D l o a d D lUopaldo a dU p l oTaodt a l T o tSaple n t S p e nLte f t LSepfete d
Spee
d |
2026-06-02
11:33:29 | 19019:
boards/xtensa/espressif:
Fix crypto hash tests for | esp32-devkitc
:crypto | ##[error]hash.c:264:28: error: 'sha224_huge_block_result' defined but not used [-Werror=unused-const-variable=]
264 | static const unsigned char sha224_huge_block_result[28] =
| ^~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[2]: *** [/github/workspace/sources/apps/Application.mk:330: hash.c.github.workspace.sources.apps.testing.drivers.crypto.o] Error 1
make[2]: Target 'all' not remade because of errors.
make[1]: *** [Makefile:54: /github |
2026-06-02
11:12:16 | 19020:
drivers/mmcsd:
Remove eMMC partitions when !CONFIG | sim
:lua | % Xf
e r d0 A v e r0a g e S0p e e d 0 T i m e0 T i0m e 0T i m e C0u r-r-e:n-t- |
2026-06-02
11:00:22 | 3516:
testing/drivers/crypto:
Fix typo on hash test | sim
:lua | % T %o% t TaTolot ta al l % R %e% c ReReiecvceeeidiv ve%ed d X %f% eXrfde r dA v eAvreargaeg eS pSepeede d Time Time Time Current
X f e rd Av e r a g e S p ee d D l Toiamde U pTliomaed T oTtiamle CSuprernetn t
L e f t S p e e d
0 D0lo a d U0pl o a d 0T ot a l 0 S pe n t 0 L e f t 0 0 -- :S-p-e:e-d- |
2026-06-02
10:36:47 | 19018:
drivers/mtd:
Remove bad block management in FTL wh | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvveeerrraaagggeee SSSpppeeeeeeddd TTTiiimmmeee TTTiiimmmeee TTTiiimmmeee CCCuuurrrrrreeennnttt
D l DoDllaoodaa dd U pUUlppollaoodaa dd T oTTtootatalal l S SpSpepenentnt t L LeLefeftf tt S pSSeppeeedee
dd |
2026-06-02
10:31:07 | 3515:
system/popen:
add dpopen/dpclose fd-based interfac | sim
:lua | v e r a g e S p e e d T i m e T i m e T iDmleo a dC u rUrpelnota
d T o t a l S p e n t L e f t S p e e d
Dloa
d 0U p l o a d0 T o0t a l 0S p e n t0 L e0f t S p e0e d |
2026-06-02
09:31:25 | 3515:
system/popen:
add dpopen/dpclose fd-based interfac | esp32s3-devkit
:fastboot | Killing pytest after timeout... |
2026-06-02
09:20:38 | 3515:
system/popen:
add dpopen/dpclose fd-based interfac | esp32p4-function-ev-board
:spi | (Same) |
2026-06-02
07:58:51 | 19016:
libs/libc/dirent:
preserve errno on readdir() end- | sim
:lua | p e nt L e f t S p e e d
0 - - : - - : - - - - : - - : -- - - : - - Dloa:d- - U p l o0ad Total Spent Left Speed |
2026-06-02
04:49:34 | 3515:
system/popen:
add dpopen/dpclose fd-based interfac | nucleo-f446re
:systemview | CMake Error at /github/workspace/sources/nuttx/build/_deps/systemview-subbuild/systemview-populate-prefix/src/systemview-populate-stamp/download-systemview-populate.cmake:170 (message):
Each download failed!
error: downloading 'https://www.segger.com/downloads/systemview/SystemView_Src_V356.zip' failed
status_code: 22
status_string: "HTTP response code said error"
log:
--- LOG BEGIN ---
Trying 18.161.170.103:443...
Connected to www.segger.com (18.161.170.103) port 443 (#0)
ALPN: |
2026-06-02
04:41:56 | 3515:
system/popen:
add dpopen/dpclose fd-based interfac | stm32f103-minimum
:adb | t
D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnetnt LLeefftt SpSepede
ed |
2026-06-02
04:14:05 | 3511:
system/popen:
Avoid copying FILE | esp32s3-devkit
:pwm | Killing pytest after timeout... |
2026-06-02
04:01:10 | 3511:
system/popen:
Avoid copying FILE | esp32p4-function-ev-board
:pwm | (Same) |
2026-06-02
03:23:19 | 3515:
system/popen:
add dpopen/dpclose fd-based interfac | sim
:lua | i m e C u r r e n t
DD ll oo aa dd UU pp ll oo aa ddD l o aTTdoo tt aaUllp l o aSSdpp ee nn ttT o t a lLL ee ff ttS p eSSnpptee ee dd
Lef
t 00S p e e d
00 |
2026-06-01
19:09:47 | 19013:
arch/arm/src/stm32hx/stm32_adc:
Reset channel coun | stm32f103-minimum
:adb | DDllooaadd UpUlpolaoda d T oTtoatla l S pSepnetn t L eLfetf t S pSepeede
d |
2026-06-01
16:23:37 | 19011:
net/tcp:
Reset RTO after retransmissions per Karn' | esp32s3-devkit
:pwm | Killing pytest after timeout... |
2026-06-01
16:11:14 | 19011:
net/tcp:
Reset RTO after retransmissions per Karn' | esp32p4-function-ev-board
:timers | (Same) |
2026-06-01
16:03:50 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32s3-devkit
:adb | (Same) |
2026-06-01
15:50:29 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32p4-function-ev-board
:rmt | (Same) |
2026-06-01
15:40:15 | 19011:
net/tcp:
Reset RTO after retransmissions per Karn' | stm32f103-minimum
:adb | ed |
2026-06-01
15:16:57 | 19011:
net/tcp:
Reset RTO after retransmissions per Karn' | esp32-devkitc
:blewifi | 0 % Total % Received % Xferd Average Speed Time Time Time Current |
2026-06-01
15:10:48 | 19010:
boards/risc-v/espressif:
Fix crypto hash tests for | esp32p4-function-ev-board
:gpio | Killing pytest after timeout... |
2026-06-01
14:11:44 | 19000:
arch/sim:
Fix OOB read/write in usrsock_ioctl_hand | sim
:lua | me
0 T i m e 0 C u r r0e n t
o a d U p l o ad T o t aDll o a dS p eUnptl o a d Le f tT o tSaplee d
Spe
nt Left Speed |
2026-06-01
14:06:25 | 19011:
net/tcp:
Reset RTO after retransmissions per Karn' | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvveeerrraaagggeee SSSpppeeeeeeddd TTTiiimmmeee TTTiiimmmeee TTTiiimmmeee CCCuuurrrrrreeennnttt
DDDllloooaaaddd UUUpppllloooaaaddd TTToootttaaalll SSSpppeeennnttt LLLeeefffttt SSSpppeeeeeeddd |
2026-06-01
14:04:50 | 19011:
net/tcp:
Reset RTO after retransmissions per Karn' | esp32s2-saola-1
:sta_softap | d Average Speed Time Time Time Current |
2026-06-01
14:02:10 | 19009:
arch/risc-v/espressif:
Add BLE support for esp32[- | esp32p4-function-ev-board
:watchdog | Killing pytest after timeout... |
2026-06-01
13:24:28 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | sim
:lua | Tim
e 0 T i m e0 0C u r r e nt |
2026-06-01
12:48:23 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | sim
:lua | m e T i m e T i m e C u r r e n t
D l o a d U p l o a d T o t a l Spent Left Speed
% 0T o t a l 0 % 0R e c e i v0e d % 0X f e r d 0 A v e r a g0e S p e e d0 - Time Time Time Current |
2026-06-01
10:20:24 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f777zit6-meadow
:i2s | make: *** [tools/Unix.mk:745: olddefconfig] Error 1
make: *** [tools/Unix.mk:745: olddefconfig] Error 1
make: *** [tools/Unix.mk:745: olddefconfig] Error 1
make: *** [tools/Unix.mk:780: savedefconfig] Error 1
make: *** [tools/Unix.mk:745: olddefconfig] Error 1
Untracked files:
defconfig.tmp
nothing added to commit but untracked files present (use "git add" to track) |
2026-06-01
10:16:09 | 3514:
testing/drivers/crypto:
Add SH224 hash test | esp32s3-devkit
:ulp | Killing pytest after timeout... |
2026-06-01
10:14:27 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32p4-function-ev-board
:tickless | (Same) |
2026-06-01
10:02:27 | 3514:
testing/drivers/crypto:
Add SH224 hash test | esp32p4-function-ev-board
:qencoder | (Same) |
2026-06-01
08:07:32 | 3512:
system/microros:
Add UDP and serial custom transpo | esp32s3-devkit
:ulp | (Same) |
2026-06-01
08:01:28 | 3514:
testing/drivers/crypto:
Add SH224 hash test | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvveeerrraaagggeee SSSpppeeeeeeddd TTTiiimmmeee TTTiiimmmeee TTTiiimmmeee CCCuuurrrrrreeennnttt
DDDllloooaaaddd UUUpppllloooaaaddd TTToootttaaalll SSSpppeeennnttt LLLeeefffttt SSSpppeeeeeeddd |
2026-06-01
07:53:26 | 3512:
system/microros:
Add UDP and serial custom transpo | esp32p4-function-ev-board
:timers | Killing pytest after timeout... |
2026-06-01
07:22:21 | 3512:
system/microros:
Add UDP and serial custom transpo | stm32f103-minimum
:adb | D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnet n t L e fLte f tS p eSepde
ed |
2026-06-01
06:07:21 | 19008:
include/unistd:
add dpopen/dpclose declarations | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-06-01
06:02:07 | 19008:
include/unistd:
add dpopen/dpclose declarations | esp32p4-function-ev-board
:qencoder | (Same) |
2026-06-01
05:49:59 | 3512:
system/microros:
Add UDP and serial custom transpo | sim
:lua | et S pS pe ee ed d
T i m
e 0 T i % m e0T o t a l 0 T i m e % 0R C eDu clr eor iae0vdn e t d
U %p l 0Xo fa ed r d T 0Ao vt ea rl a g e 0 S Sp- pe- en: et- d - : - - TL ie- mf- et: - - S: p-DTe-lie omd-ae-d : - -U :p -lTo-ia md e T0oCtuarlr e n tS
p e n t
L e f 0t S p e e d |
2026-06-01
03:52:22 | 3515:
system/popen:
add dpopen/dpclose fd-based interfac | sim
:citest | popen.c: In function 'popen':
##[error]popen.c:136:8: error: implicit declaration of function 'dpopen'; did you mean 'popen'? [-Werror=implicit-function-declaration]
136 | fd = dpopen(command, oflag, &container->shell);
| ^~~~~~
| popen
##[error]popen.c:149:7: error: implicit declaration of function 'dpclose'; did you mean 'pclose'? [-Werror=implicit-function-declaration]
149 | dpclose(fd, container->shell);
| ^~~~~~~
| pclose
cc1: all warnings be |
2026-06-01
03:45:08 | 3515:
system/popen:
add dpopen/dpclose fd-based interfac | sim
:lua | ent
Ti
m e 0 T i m0e 0T i m e 0C u r r e0n t |
2026-06-01
03:42:10 | 3515:
system/popen:
add dpopen/dpclose fd-based interfac | sabre-6quad
:citest | popen.c: In function 'popen':
##[error]popen.c:136:8: error: implicit declaration of function 'dpopen'; did you mean 'popen'? [-Werror=implicit-function-declaration]
136 | fd = dpopen(command, oflag, &container->shell);
| ^~~~~~
| popen
##[error]popen.c:149:7: error: implicit declaration of function 'dpclose'; did you mean 'pclose'? [-Werror=implicit-function-declaration]
149 | dpclose(fd, container->shell);
| ^~~~~~~
| pclose
cc1: all warnings be |
2026-06-01
01:23:26 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32h745i-disco
:nsh_cm4 | chip/stm32_start.c: In function '__start':
##[error]chip/stm32_start.c:198:3: error: implicit declaration of function 'stm32_waitfor_cm7' [-Werror=implicit-function-declaration]
198 | stm32_waitfor_cm7();
| ^~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[1]: *** [Makefile:179: stm32_start.o] Error 1
make[1]: Target 'libarch.a' not remade because of errors.
make: *** [tools/LibTargets.mk:170: arch/arm/src/libarch.a] Error 2
make: Target 'all' not remade because of |
2026-06-01
01:22:15 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32h745i-disco
:nsh_cm4_rptun | (Same) |
2026-06-01
00:29:48 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f777zit6-meadow
:i2s | make: *** [tools/Unix.mk:745: olddefconfig] Error 1
make: *** [tools/Unix.mk:745: olddefconfig] Error 1
make: *** [tools/Unix.mk:745: olddefconfig] Error 1
make: *** [tools/Unix.mk:780: savedefconfig] Error 1
make: *** [tools/Unix.mk:745: olddefconfig] Error 1
Untracked files:
defconfig.tmp
nothing added to commit but untracked files present (use "git add" to track) |
2026-05-31
23:09:44 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f4discovery
:cxxtest | ld.lld: error: undefined symbol: operator new(unsigned int)
>>> referenced by vector.cpp
>>> vector.o:(std::vector>::vector(std::allocator const&)) in archive /github/workspace/sources/nuttx/staging/libxx.a
>>> referenced by vector.cpp
>>> vector.o:(OUTLINED_FUNCTION_1) in archive /github/workspace/sources/nuttx/staging/libxx.a
>>> referenced by vector.cpp
>>> vector.o:(OUTLINED_FUNCTION_2) in archive /github/worksp |
2026-05-31
23:03:29 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f4discovery
:testlibcxx | ld.lld: error: undefined symbol: operator new(unsigned int)
>>> referenced by helloxx_main.cxx
>>> helloxx_main.cxx.github.workspace.sources.apps.examples.helloxx_1.o:(helloxx_main) in archive /github/workspace/sources/nuttx/staging/libapps.a
ld.lld: error: undefined symbol: operator delete(void*)
>>> referenced by helloxx_main.cxx
>>> helloxx_main.cxx.github.workspace.sources.apps.examples.helloxx_1.o:(helloxx_main) in archive /github/workspace/sources/nuttx/stagi |
2026-05-31
22:49:52 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f4discovery
:max7219 | ##[error]nxglib/nxglib_setpixel_1bpp.c:853:14: error: expected ';' after expression
853 | __uint128_t res128 = (__uint128_t)a * b;
| ^
| ;
##[error]nxglib/nxglib_setpixel_1bpp.c:853:3: error: use of undeclared identifier '__uint128_t'
853 | __uint128_t res128 = (__uint128_t)a * b;
| ^
##[error]nxglib/nxglib_setpixel_1bpp.c:853:15: error: use of undeclared identifier 'res128'
853 | __uint128_t res128 = (__uint128_t)a * b;
| ^
##[er |
2026-05-31
22:13:51 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm3240g-eval
:knxwm | arm-none-eabi-ld: /github/workspace/sources/nuttx/nuttx section `.bss' will not fit in region `ksram'
arm-none-eabi-ld: region `ksram' overflowed by 664 bytes
make[1]: *** [Makefile:230: nuttx] Error 1
make: *** [tools/Unix.mk:559: nuttx] Error 2
make: Target 'all' not remade because of errors. |
2026-05-31
21:57:08 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | nucleo-f302r8
:cansock | ##[error]dirent/lib_nftw.c:193:41: error: array index 1 is past the end of the array (that has type 'char[1]') [-Werror,-Warray-bounds]
193 | if (de->d_name[0] == '.' && (!de->d_name[1] ||
| ^ ~
116 | char d_name[NAME_MAX + 1]; /* File name */
| ^
##[error]dirent/lib_nftw.c:194:16: error: array index 1 is past the end of the array (that has type 'char[1]') [-Werror,-Warray-bounds]
194 | (de->d_name[1] == '.' |
2026-05-31
21:55:49 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | nucleo-f302r8
:ihm07m1_f32 | ld.lld: error: section '.data' will not fit in region 'flash': overflowed by 76 bytes
make[1]: *** [Makefile:230: nuttx] Error 1
make: *** [tools/Unix.mk:569: nuttx] Error 2
make: Target 'all' not remade because of errors. |
2026-05-31
21:50:35 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | photon
:wlan | ##[error]board/stm32_wlan.c:126:27: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
126 | int photon_wlan_initialize()
| ^
| void
1 error generated.
make[2]: *** [/github/workspace/sources/nuttx/boards/Board.mk:100: stm32_wlan.o] Error 1
make[2]: Target 'libboard.a' not remade because of errors.
make[1]: *** [Makefile:196: board/libboard.a] Error 2
make[1]: Target ' |
2026-05-31
21:49:04 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | photon
:wlan-perf | (Same) |
2026-05-31
21:42:52 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | emw3162
:wlan | ##[error]board/stm32_wlan.c:145:28: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
145 | int emw3162_wlan_initialize()
| ^
| void
1 error generated.
make[2]: *** [/github/workspace/sources/nuttx/boards/Board.mk:100: stm32_wlan.o] Error 1
make[2]: Target 'libboard.a' not remade because of errors.
make[1]: *** [Makefile:196: board/libboard.a] Error 2
make[1]: Targe |
2026-05-31
21:29:04 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f103-minimum
:adb | ##[error]libuv/src/uv-common.c:808:16: error: passing an object that undergoes default argument promotion to 'va_start' has undefined behavior [-Werror,-Wvarargs]
808 | va_start(ap, option);
| ^
libuv/src/uv-common.c:804:55: note: parameter of type 'uv_loop_option' is declared here
804 | int uv_loop_configure(uv_loop_t* loop, uv_loop_option option, ...) {
| ^
1 error generated.
make[2]: *** [/github/workspace/sources |
2026-05-31
21:26:56 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f103-minimum
:jlx12864g | ##[error]nxglib/nxglib_setpixel_1bpp.c:853:14: error: expected ';' after expression
853 | __uint128_t res128 = (__uint128_t)a * b;
| ^
| ;
##[error]nxglib/nxglib_setpixel_1bpp.c:853:3: error: use of undeclared identifier '__uint128_t'
853 | __uint128_t res128 = (__uint128_t)a * b;
| ^
##[error]nxglib/nxglib_setpixel_1bpp.c:853:15: error: use of undeclared identifier 'res128'
853 | __uint128_t res128 = (__uint128_t)a * b;
| ^
##[er |
2026-05-31
21:17:55 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32s3-devkit
:adb | Killing pytest after timeout... |
2026-05-31
21:15:04 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32_tiny
:usbnsh | ##[error]board/stm32_boot.c:107:7: error: unused variable 'ret' [-Werror,-Wunused-variable]
107 | int ret = OK;
| ^~~
1 error generated.
make[2]: *** [/github/workspace/sources/nuttx/boards/Board.mk:100: stm32_boot.o] Error 1
make[2]: Target 'libboard.a' not remade because of errors.
make[1]: *** [Makefile:196: board/libboard.a] Error 2
make[1]: Target 'nuttx' not remade because of errors.
make: *** [tools/Unix.mk:569: nuttx] Error 2
make: Target 'all' not remade because o |
2026-05-31
21:12:25 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | maple
:nx | ##[error]nxglib/nxglib_setpixel_1bpp.c:853:14: error: expected ';' after expression
853 | __uint128_t res128 = (__uint128_t)a * b;
| ^
| ;
##[error]nxglib/nxglib_setpixel_1bpp.c:853:3: error: use of undeclared identifier '__uint128_t'
853 | __uint128_t res128 = (__uint128_t)a * b;
| ^
##[error]nxglib/nxglib_setpixel_1bpp.c:853:15: error: use of undeclared identifier 'res128'
853 | __uint128_t res128 = (__uint128_t)a * b;
| ^
##[er |
2026-05-31
21:09:20 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32p4-function-ev-board
:qencoder | Killing pytest after timeout... |
2026-05-31
20:56:14 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | shenzhou
:thttpd | /usr/bin/bash: line 1: mknxflat: command not found
make[4]: *** [Makefile:72: phf-thunk.S] Error 127
make[4]: Target 'phf' not remade because of errors.
make[3]: *** [Makefile:59: cgi-src/phf] Error 2
/usr/bin/bash: line 1: mknxflat: command not found
make[4]: *** [Makefile:90: redirect-thunk.S] Error 127
make[4]: Target 'redirect' not remade because of errors.
make[3]: *** [Makefile:65: cgi-src/redirect] Error 2
/usr/bin/bash: line 1: mknxflat: command not found
make[4]: *** [Mak |
2026-05-31
20:14:13 | 3510:
apps/cmake:
Fix aarch64 NuttX Rust target specs | esp32p4-function-ev-board
:timers | Killing pytest after timeout... |
2026-05-31
19:40:44 | 3510:
apps/cmake:
Fix aarch64 NuttX Rust target specs | stm32f103-minimum
:adb | D lDolaoda d U pUlpolaoda d T oTtoatall SSppeenntt LLeefftt SSppeeeedd |
2026-05-31
19:06:43 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrdd AAvveerraaggee SSppeeeedd TTiimmee TTiimmee TiTmiem e C urCruernrte
n t
T
i m e0 C u r r e0n t |
2026-05-31
18:24:42 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | sim
:lua | e r a g e S p e e d Time Time Time Current |
2026-05-31
17:18:26 | 19005:
arm64/am62x:
Add TISCI system controller client, G | pocketbeagle2
:nsh | pocketbeagle2_bringup.c: In function 'pocketbeagle2_i2c_pinmux':
##[error]pocketbeagle2_bringup.c:78:12: error: unused variable 'i2c2_cfg' [-Werror=unused-variable]
78 | uint32_t i2c2_cfg = AM62X_PADCFG_RXACTIVE | AM62X_PADCFG_PULL_UP |
| ^~~~~~~~
##[error]pocketbeagle2_bringup.c:76:12: error: unused variable 'i2c0_cfg' [-Werror=unused-variable]
76 | uint32_t i2c0_cfg = AM62X_PADCFG_RXACTIVE | AM62X_PADCFG_PULL_UP |
| ^~~~~~~~
pocketbeagle2_bringup.c: At top le |
2026-05-31
17:17:15 | 19005:
arm64/am62x:
Add TISCI system controller client, G | pocketbeagle2
:ostest | (Same) |
2026-05-31
16:56:45 | 19006:
tools/nxstyle:
Whitelist Micro XRCE-DDS uxrCustomT | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-05-31
16:48:17 | 19006:
tools/nxstyle:
Whitelist Micro XRCE-DDS uxrCustomT | esp32p4-function-ev-board
:tickless | (Same) |
2026-05-31
16:39:08 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | sim
:lua | % Tot % Total % Received % Xferd Average Speed Time Time Time Current
c e i v e d % Xf e r d A v e r a g e S p e e d T i m eD l o a dT i mUep l o a d T i mTeo t aClu r r eSnpte
n t L e f t S p e e d
v-e-d: - |
2026-05-31
16:12:56 | 19006:
tools/nxstyle:
Whitelist Micro XRCE-DDS uxrCustomT | stm32f103-minimum
:adb | Recei
v e d0 % X f e r0d A v0e r a g e 0S p e e d0 T i m0e T i0m e 0T i-m-e: - -C:u-r-r e-n-t: |
2026-05-31
16:04:22 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f401rc-rs485
:telnetd | Killing pytest after timeout... |
2026-05-31
15:52:10 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f4discovery
:cxxtest | ld.lld: error: undefined symbol: operator new(unsigned int)
>>> referenced by cxxtest_main.cxx
>>> cxxtest_main.cxx.github.workspace.sources.apps.testing.cxx.cxxtest_1.o:(cxxtest_main) in archive /github/workspace/sources/nuttx/staging/libapps.a
>>> referenced by cxxtest_main.cxx
>>> cxxtest_main.cxx.github.workspace.sources.apps.testing.cxx.cxxtest_1.o:(std::vector>::vector(std::vector> const&)) in archive /github/wor |
2026-05-31
15:47:18 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f4discovery
:testlibcxx | ld.lld: error: undefined symbol: operator new(unsigned int)
>>> referenced by helloxx_main.cxx
>>> helloxx_main.cxx.github.workspace.sources.apps.examples.helloxx_1.o:(helloxx_main) in archive /github/workspace/sources/nuttx/staging/libapps.a
ld.lld: error: undefined symbol: operator delete(void*)
>>> referenced by helloxx_main.cxx
>>> helloxx_main.cxx.github.workspace.sources.apps.examples.helloxx_1.o:(helloxx_main) in archive /github/workspace/sources/nuttx/stagi |
2026-05-31
15:36:43 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f4discovery
:max7219 | ##[error]nxglib/nxglib_setpixel_1bpp.c:853:14: error: expected ';' after expression
853 | __uint128_t res128 = (__uint128_t)a * b;
| ^
| ;
##[error]nxglib/nxglib_setpixel_1bpp.c:853:3: error: use of undeclared identifier '__uint128_t'
853 | __uint128_t res128 = (__uint128_t)a * b;
| ^
##[error]nxglib/nxglib_setpixel_1bpp.c:853:15: error: use of undeclared identifier 'res128'
853 | __uint128_t res128 = (__uint128_t)a * b;
| ^
##[er |
2026-05-31
15:30:04 | 19006:
tools/nxstyle:
Whitelist Micro XRCE-DDS uxrCustomT | gd32f470zk-eval
:fmclfsnsh | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[1]: *** [littlefs/Make.defs:68: .littlefsunpack] Error 2
make[1]: Target 'context' not remade because of errors.
make: *** [tools/Unix.mk:471: fs/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-05-31
15:09:37 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm3240g-eval
:knxwm | arm-none-eabi-ld: /github/workspace/sources/nuttx/nuttx section `.bss' will not fit in region `ksram'
arm-none-eabi-ld: region `ksram' overflowed by 664 bytes
make[1]: *** [Makefile:230: nuttx] Error 1
make: *** [tools/Unix.mk:559: nuttx] Error 2
make: Target 'all' not remade because of errors. |
2026-05-31
14:56:47 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | nucleo-f302r8
:cansock | ##[error]dirent/lib_nftw.c:193:41: error: array index 1 is past the end of the array (that has type 'char[1]') [-Werror,-Warray-bounds]
193 | if (de->d_name[0] == '.' && (!de->d_name[1] ||
| ^ ~
116 | char d_name[NAME_MAX + 1]; /* File name */
| ^
##[error]dirent/lib_nftw.c:194:16: error: array index 1 is past the end of the array (that has type 'char[1]') [-Werror,-Warray-bounds]
194 | (de->d_name[1] == '.' |
2026-05-31
14:55:45 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | nucleo-f302r8
:ihm07m1_f32 | ld.lld: error: section '.data' will not fit in region 'flash': overflowed by 76 bytes
make[1]: *** [Makefile:230: nuttx] Error 1
make: *** [tools/Unix.mk:569: nuttx] Error 2
make: Target 'all' not remade because of errors. |
2026-05-31
14:51:41 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | photon
:wlan | ##[error]board/stm32_wlan.c:126:27: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
126 | int photon_wlan_initialize()
| ^
| void
1 error generated.
make[2]: *** [/github/workspace/sources/nuttx/boards/Board.mk:100: stm32_wlan.o] Error 1
make[2]: Target 'libboard.a' not remade because of errors.
make[1]: *** [Makefile:196: board/libboard.a] Error 2
make[1]: Target ' |
2026-05-31
14:50:31 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | photon
:wlan-perf | (Same) |
2026-05-31
14:45:48 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | emw3162
:wlan | ##[error]board/stm32_wlan.c:145:28: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
145 | int emw3162_wlan_initialize()
| ^
| void
1 error generated.
make[2]: *** [/github/workspace/sources/nuttx/boards/Board.mk:100: stm32_wlan.o] Error 1
make[2]: Target 'libboard.a' not remade because of errors.
make[1]: *** [Makefile:196: board/libboard.a] Error 2
make[1]: Targe |
2026-05-31
14:35:26 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f103-minimum
:adb | ##[error]libuv/src/uv-common.c:808:16: error: passing an object that undergoes default argument promotion to 'va_start' has undefined behavior [-Werror,-Wvarargs]
808 | va_start(ap, option);
| ^
libuv/src/uv-common.c:804:55: note: parameter of type 'uv_loop_option' is declared here
804 | int uv_loop_configure(uv_loop_t* loop, uv_loop_option option, ...) {
| ^
1 error generated.
make[2]: *** [/github/workspace/sources |
2026-05-31
14:33:40 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32f103-minimum
:jlx12864g | ##[error]nxglib/nxglib_setpixel_1bpp.c:853:14: error: expected ';' after expression
853 | __uint128_t res128 = (__uint128_t)a * b;
| ^
| ;
##[error]nxglib/nxglib_setpixel_1bpp.c:853:3: error: use of undeclared identifier '__uint128_t'
853 | __uint128_t res128 = (__uint128_t)a * b;
| ^
##[error]nxglib/nxglib_setpixel_1bpp.c:853:15: error: use of undeclared identifier 'res128'
853 | __uint128_t res128 = (__uint128_t)a * b;
| ^
##[er |
2026-05-31
14:31:14 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32s3-devkit
:oneshot | Killing pytest after timeout... |
2026-05-31
14:28:11 | 19005:
arm64/am62x:
Add TISCI system controller client, G | pocketbeagle2
:ostest | pocketbeagle2_bringup.c: In function 'pocketbeagle2_i2c_pinmux':
##[error]pocketbeagle2_bringup.c:78:12: error: unused variable 'i2c2_cfg' [-Werror=unused-variable]
78 | uint32_t i2c2_cfg = AM62X_PADCFG_RXACTIVE | AM62X_PADCFG_PULL_UP |
| ^~~~~~~~
##[error]pocketbeagle2_bringup.c:76:12: error: unused variable 'i2c0_cfg' [-Werror=unused-variable]
76 | uint32_t i2c0_cfg = AM62X_PADCFG_RXACTIVE | AM62X_PADCFG_PULL_UP |
| ^~~~~~~~
pocketbeagle2_bringup.c: At top le |
2026-05-31
14:24:25 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | stm32_tiny
:usbnsh | ##[error]board/stm32_boot.c:107:7: error: unused variable 'ret' [-Werror,-Wunused-variable]
107 | int ret = OK;
| ^~~
1 error generated.
make[2]: *** [/github/workspace/sources/nuttx/boards/Board.mk:100: stm32_boot.o] Error 1
make[2]: Target 'libboard.a' not remade because of errors.
make[1]: *** [Makefile:196: board/libboard.a] Error 2
make[1]: Target 'nuttx' not remade because of errors.
make: *** [tools/Unix.mk:569: nuttx] Error 2
make: Target 'all' not remade because o |
2026-05-31
14:23:38 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32p4-function-ev-board
:tickless | Killing pytest after timeout... |
2026-05-31
14:22:20 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | maple
:nx | ##[error]nxglib/nxglib_setpixel_1bpp.c:853:14: error: expected ';' after expression
853 | __uint128_t res128 = (__uint128_t)a * b;
| ^
| ;
##[error]nxglib/nxglib_setpixel_1bpp.c:853:3: error: use of undeclared identifier '__uint128_t'
853 | __uint128_t res128 = (__uint128_t)a * b;
| ^
##[error]nxglib/nxglib_setpixel_1bpp.c:853:15: error: use of undeclared identifier 'res128'
853 | __uint128_t res128 = (__uint128_t)a * b;
| ^
##[er |
2026-05-31
14:09:55 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | shenzhou
:thttpd | /usr/bin/bash: line 1: mknxflat: command not found
/usr/bin/bash: line 1: mknxflat: command not found
make[4]: *** [Makefile:72: phf-thunk.S] Error 127
make[4]: Target 'phf' not remade because of errors.
make[4]: *** [Makefile:90: redirect-thunk.S] Error 127
make[4]: Target 'redirect' not remade because of errors.
make[3]: *** [Makefile:59: cgi-src/phf] Error 2
make[3]: *** [Makefile:65: cgi-src/redirect] Error 2
/usr/bin/bash: line 1: mknxflat: command not found
make[4]: *** [Mak |
2026-05-31
14:00:36 | 19004:
[BREAKING CHANGE] reorganize and unify STM32 ports | esp32s3-devkit
:qemu_toywasm | % T o%t aTlo t a l % R e%c eRievceedi v%e dX f%e rXdf e rAdv er aAgvee rSapgeee dS p e eTdi m e T i m eT i m e T i m e T i m eT i mCeu r reCnutr
r e n t
d U
p l o0a d T0o ta l 0 S p e n t0 L0e f t S p0 e e d |
2026-05-31
11:22:25 | 19003:
tools/rust:
Move NuttX Rust target specs into nutt | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-05-31
11:10:24 | 19003:
tools/rust:
Move NuttX Rust target specs into nutt | esp32p4-function-ev-board
:tickless | (Same) |
2026-05-31
10:34:57 | 19003:
tools/rust:
Move NuttX Rust target specs into nutt | stm32f103-minimum
:adb | t
DDlolaoda dU p lUopaldo a d T o tTaolt a l S p eSnpte n t L e fLte f tS p eSepde
ed |
2026-05-31
09:17:40 | 3512:
system/microros:
Add UDP and serial custom transpo | esp32s3-devkit
:fastboot | Killing pytest after timeout... |
2026-05-31
09:05:52 | 19003:
tools/rust:
Move NuttX Rust target specs into nutt | sim
:lua | r r en t
D l o a dD l Uopaldo a d U p lTooatda l TSopteanlt SLpeeftn t S p e Lefetd
Spe
ed |
2026-05-31
09:05:12 | 3512:
system/microros:
Add UDP and serial custom transpo | esp32p4-function-ev-board
:gpio | Killing pytest after timeout... |
2026-05-31
08:19:26 | 3512:
system/microros:
Add UDP and serial custom transpo | stm32f103-minimum
:adb | t
D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnetn t L eLfetf t S pSepeede
d |
2026-05-31
08:03:31 | 3512:
system/microros:
Add UDP and serial custom transpo | qemu-armv8a
:fb | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of fdt/dtc.zip or
fdt/dtc.zip.zip, and cannot find fdt/dtc.zip.ZIP, period.
make[1]: *** [fdt/Make.defs:32: dtc] Error 9
make[1]: Target 'context' not remade because of errors.
make: *** [tools/Un |
2026-05-31
07:36:51 | 3511:
system/popen:
Avoid copying FILE | esp32s3-devkit
:oneshot | Killing pytest after timeout... |
2026-05-31
07:25:14 | 3511:
system/popen:
Avoid copying FILE | esp32p4-function-ev-board
:tickless | (Same) |
2026-05-31
07:00:39 | 3512:
system/microros:
Add UDP and serial custom transpo | sim
:lua | %% TTotoatla l % %R eRceeicveeidv e%d X%f eXrfd e rAdv e rAavgeer Speed Time Time Time Current |
2026-05-31
02:33:08 | 3514:
testing/drivers/crypto:
Add SH224 hash test | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-05-31
02:19:31 | 3514:
testing/drivers/crypto:
Add SH224 hash test | esp32p4-function-ev-board
:qencoder | (Same) |
2026-05-31
01:21:47 | 3514:
testing/drivers/crypto:
Add SH224 hash test | rv-virt
:knetnsh64 | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of open-amp.zip or
open-amp.zip.zip, and cannot find open-amp.zip.ZIP, period.
make[1]: *** [open-amp.defs:67: open-amp.zip] Error 9
make[1]: Target 'context' not remade because of errors.
make: * |
2026-05-30
20:37:09 | 19001:
tools/nxstyle:
Whitelist ROS 2 message type identi | esp32s3-devkit
:adb | Killing pytest after timeout... |
2026-05-30
20:34:35 | 3512:
system/microros:
Add UDP and serial custom transpo | esp32s3-devkit
:ulp | (Same) |
2026-05-30
20:24:08 | 19001:
tools/nxstyle:
Whitelist ROS 2 message type identi | esp32p4-function-ev-board
:qencoder | (Same) |
2026-05-30
20:20:12 | 3512:
system/microros:
Add UDP and serial custom transpo | esp32p4-function-ev-board
:gpio | (Same) |
2026-05-30
19:00:35 | 3512:
system/microros:
Add UDP and serial custom transpo | qemu-armv8a
:xedge_demo | ent |
2026-05-30
18:20:56 | 19001:
tools/nxstyle:
Whitelist ROS 2 message type identi | sim
:lua | rd
A v e0r a g e S0p e e d 0 T i m e0 T0i m e 0 T i m e 0 C u r r e n0t
-:-- 0 |
2026-05-30
18:19:57 | 19001:
tools/nxstyle:
Whitelist ROS 2 message type identi | esp32s2-saola-1
:coremark | [main.zip]
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of main.zip or
main.zip.zip, and cannot find main.zip.ZIP, period.
make[3]: *** [Makefile:111: coremark] Error 9
make[3]: Target 'context' not remade because of errors.
make[2]: *** |
2026-05-30
18:17:40 | 3512:
system/microros:
Add UDP and serial custom transpo | sim
:lua | p e e d T i m e T i m e T i m e C u r rDelnota
d U p l o a d T o t a l Spent Left Speed |
2026-05-30
16:06:53 | 19000:
arch/sim:
Fix OOB read/write in usrsock_ioctl_hand | sim
:lua | D l%o aTdo t aUlp l o a d% R eTcoetiavle d % Xferd Average Speed Time Time % T o tTailm e C%u rRreecneti
v e d % X f e r d A v e r a g e S p e e d T i m e D l o aTdi m eU p l o a dT i m eT o tCaulr r e nStp
e n t L e f t S p e e d
:--:-
- -0- : - - :- -0 00 0 S p e n0t L e0f t S p e0e d
m e
0 -0T- i: m- e- : -0 - - T- i:0m- e- : - C- u 0r- r- e: n- t-0
: - - 0 0 0 |
2026-05-30
07:39:49 | 3511:
system/popen:
Avoid copying FILE | esp32s3-devkit
:pwm | Killing pytest after timeout... |
2026-05-30
07:27:32 | 3511:
system/popen:
Avoid copying FILE | esp32p4-function-ev-board
:gpio | (Same) |
2026-05-30
06:53:38 | 3511:
system/popen:
Avoid copying FILE | stm32f103-minimum
:adb | eed |
2026-05-30
05:21:57 | 3511:
system/popen:
Avoid copying FILE | sim
:lua | T i m e C u r r e n t
D l o a d U p l oa d T o t aDll o a dS p eUnptl o a d L e fTto t aSlp e e dS
pent
0 Le f t 0S p e e d0 |
2026-05-30
02:11:53 | 18997:
drivers/rpmsg:
Fix typo rpmsg_device_destory -> rp | esp32s3-devkit
:pwm | Killing pytest after timeout... |
2026-05-30
02:06:53 | 18996:
drivers/analog/dac7554:
Add NULL checks after kmm_ | esp32s3-devkit
:mbedtls | --1:0-0- -1-3:1-7-3: - - - -0: --1:3-1-7 3 9 4 1 k0 0 |
2026-05-30
02:00:09 | 18997:
drivers/rpmsg:
Fix typo rpmsg_device_destory -> rp | esp32p4-function-ev-board
:qencoder | Killing pytest after timeout... |
2026-05-30
01:59:10 | 18996:
drivers/analog/dac7554:
Add NULL checks after kmm_ | esp32s3-devkit
:toywasm | (Same) |
2026-05-30
01:49:01 | 18996:
drivers/analog/dac7554:
Add NULL checks after kmm_ | esp32p4-function-ev-board
:qencoder | (Same) |
2026-05-30
01:13:36 | 18996:
drivers/analog/dac7554:
Add NULL checks after kmm_ | stm32f103-minimum
:adb | d |
2026-05-29
23:58:42 | 18997:
drivers/rpmsg:
Fix typo rpmsg_device_destory -> rp | sim
:lua | R e c e i v e d % X f e r d A v e r a g% e T o St ap leD el do a d % RTUeipcmleeoi av de d T %im eX f e r d T TiAomvteea l C u rSrpeernntt
L e fa tg e S Spp ee eedd
T
i m e 0 T i 0m e 0 T i m e 0D lC uo ra r0de n t
U p l o a d T o t a l 0 S p e n t 0 L e f t0 -DS-lpo:ea-de- d:
-U-p l-o-
a:d - - 0: -T -o t -a -l0: - - :S -p0-e n t 00 L ef t 0 S p e e d |
2026-05-29
23:45:35 | 18996:
drivers/analog/dac7554:
Add NULL checks after kmm_ | sim
:lua | e i v e d % X f e r d A v e r a g e S p e e d T i mDel o a d T iUmpleo a d TTiomtea l C u rSrpeenntt
L e f t S p e e d
--:-
T i m e C u r r e n t |
2026-05-29
21:28:17 | 18951:
sim/ft2232h:
Add FT2232H GPIO integration on NuttX | sim
:lua | %%% TTToootttaaall l % %R%e cRReeeiccveeeiidv ve%e dX f%er dX f eAvredr a gAev eSpreaedg e TSipmeee d TTiimmee Time Time Current
T0i m e C0u r r e n0t
D l o a d U p l o a d T o t a l DSlpoead Upload Total Spent nt Left Speed |
2026-05-29
21:23:50 | 18951:
sim/ft2232h:
Add FT2232H GPIO integration on NuttX | sim
:ft2232h_gpio | Package libftdi1 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libftdi1.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libftdi1' found
Package libftdi1 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libftdi1.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libftdi1' found
In file included from ./sim/sim_ft2232h_ioexpander.c:29:
./sim/sim_ft2232h_ioexpander.h:33:10 |
2026-05-29
16:48:13 | 3510:
apps/cmake:
Fix aarch64 NuttX Rust target specs | esp32s3-devkit
:pwm | Killing pytest after timeout... |
2026-05-29
16:31:51 | 3510:
apps/cmake:
Fix aarch64 NuttX Rust target specs | esp32p4-function-ev-board
:tickless | (Same) |
2026-05-29
16:09:32 | 3511:
system/popen:
Avoid copying FILE | esp32s3-devkit
:fastboot | (Same) |
2026-05-29
15:58:36 | 3510:
apps/cmake:
Fix aarch64 NuttX Rust target specs | stm32f103-minimum
:adb | r r e n t
D l o a d DUlpolaoda d U p lTootaadl TSopteantl SLpeeftn t S p e eLde
ft
S p0e e d |
2026-05-29
15:57:42 | 3511:
system/popen:
Avoid copying FILE | esp32p4-function-ev-board
:tickless | Killing pytest after timeout... |
2026-05-29
15:22:05 | 3511:
system/popen:
Avoid copying FILE | stm32f103-minimum
:adb | % Received % Xferd Average Speed Time Time Time Current |
2026-05-29
15:06:42 | 18993:
net/tcp:
Fix RTO reset after retransmissions | esp32s3-devkit
:pwm | Killing pytest after timeout... |
2026-05-29
14:53:47 | 18993:
net/tcp:
Fix RTO reset after retransmissions | esp32p4-function-ev-board
:timers | (Same) |
2026-05-29
14:25:29 | 3510:
apps/cmake:
Fix aarch64 NuttX Rust target specs | sim
:lua | T i m e Time Time Current
0 S p e e d
- - : 0- - : - - 0- - : - -0: - - - -0: - - : - -0 00 0Dl o ad Up l0o ad- - :T-o-ta:l- - S-p-e:n-t- : - -Le f-t- : -S-p:e-e-d |
2026-05-29
13:52:15 | 3511:
system/popen:
Avoid copying FILE | sim
:lua | - |
2026-05-29
13:32:45 | 18993:
net/tcp:
Fix RTO reset after retransmissions | sim
:wamr | 00 |
2026-05-29
10:04:03 | 3511:
system/popen:
Avoid copying FILE | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-05-29
09:47:56 | 3511:
system/popen:
Avoid copying FILE | esp32p4-function-ev-board
:ulp | (Same) |
2026-05-29
07:43:08 | 3511:
system/popen:
Avoid copying FILE | sim
:lua | Totadl % Received % Xferd Average Speed Time Time Time Current
Average Speed Time Time Time Current |
2026-05-29
07:35:21 | 3511:
system/popen:
Avoid copying FILE | sim
:alsa | (Unknown) |
2026-05-29
06:16:23 | 3510:
apps/cmake:
Fix aarch64 NuttX Rust target specs | esp32s3-devkit
:adb | Killing pytest after timeout... |
2026-05-29
06:11:29 | 18992:
tools/rust:
Fix aarch64 NuttX Rust target specs | esp32s3-devkit
:adb | (Same) |
2026-05-29
06:03:59 | 3510:
apps/cmake:
Fix aarch64 NuttX Rust target specs | esp32p4-function-ev-board
:qencoder | (Same) |
2026-05-29
05:57:29 | 18992:
tools/rust:
Fix aarch64 NuttX Rust target specs | esp32p4-function-ev-board
:timers | (Same) |
2026-05-29
05:25:53 | 18992:
tools/rust:
Fix aarch64 NuttX Rust target specs | stm32f103-minimum
:adb | % T%o tTaolt a l % R%e cReeicveeidv e%d X% fXefredr d A vAevreargaeg eSp eSepde e d T i mTei m e T i mTei m e T i mTei m eC u rCruernrte
n t
D l oDaldo a dU p lUopaldo a d T o tTaolt a l S p eSnpte n t L e fLte f tS p eSepde
ed |
2026-05-29
03:59:05 | 3510:
apps/cmake:
Fix aarch64 NuttX Rust target specs | sim
:lua | f e r Td i m eA v e r a gT ei m Se p e eC du r r e Tn it m
e T i m e D l o a d T i Um pe l o aC du r r e Tn ot t
a l S Dpl eon at d U pL le of at d S p eT oe tda
l
S p 0e n t D l0L eo fa td 0 SU pp ele do
a0d
T00o t a l 00 S p e n 0t 0 L 0e f t0 -0S- p: e- e- d:
-0- |
2026-05-29
03:55:40 | 18992:
tools/rust:
Fix aarch64 NuttX Rust target specs | sim
:lua | erd
A0v e r a g e0 S p e e0d T i0m e 0 T i m e 0 T i m0e C u r r0e n-t-
D l o a d DUlpolaoda d U p lTooatda l T oStpaeln t S p eLnetf t SLpeefetd
Spe
--:-- |
2026-05-28
17:46:23 | 3509:
system/lzf:
Fix missing space in Kconfig help text | esp32s3-devkit
:oneshot | Killing pytest after timeout... |
2026-05-28
17:31:05 | 3509:
system/lzf:
Fix missing space in Kconfig help text | esp32p4-function-ev-board
:rmt | (Same) |
2026-05-28
17:04:11 | 3509:
system/lzf:
Fix missing space in Kconfig help text | stm32f103-minimum
:adb | eed |
2026-05-28
16:45:23 | 18989:
net/bluetooth:
poll sockets only on Bluetooth devi | esp32s3-devkit
:oneshot | Killing pytest after timeout... |
2026-05-28
16:35:16 | 18989:
net/bluetooth:
poll sockets only on Bluetooth devi | esp32p4-function-ev-board
:gpio | (Same) |
2026-05-28
16:33:03 | 18987:
drivers/analog:
Fix memory leak in ads1115_initial | esp32s3-devkit
:toywasm | (Same) |
2026-05-28
16:23:05 | 18987:
drivers/analog:
Fix memory leak in ads1115_initial | esp32p4-function-ev-board
:watchdog | (Same) |
2026-05-28
16:21:09 | 18984:
drivers/net:
Fix typo in lan9250_set_txavailable f | esp32p4-function-ev-board
:ulp | (Same) |
2026-05-28
15:34:53 | 18989:
net/bluetooth:
poll sockets only on Bluetooth devi | rv-virt
:kfb64 | 0xc0101279 adjusted to 0xc010127c |
2026-05-28
15:34:51 | 18987:
drivers/analog:
Fix memory leak in ads1115_initial | stm32f103-minimum
:adb | ved |
2026-05-28
15:27:51 | 3509:
system/lzf:
Fix missing space in Kconfig help text | sim
:lua | i m e T i m e C u r r e n t
D l o a d U p l o a d T o t a l DSlpoeandt U p lLoeafdt STpoeteadl
S
p e n0t L0e f t 0S p e e d |
2026-05-28
15:06:27 | 18987:
drivers/analog:
Fix memory leak in ads1115_initial | esp32s3-eye
:wifi | D
load Upload Total Spent Left Speed |
2026-05-28
14:28:40 | 18989:
net/bluetooth:
poll sockets only on Bluetooth devi | sim
:lua | Speed Time Time Time Current |
2026-05-28
14:16:50 | 18987:
drivers/analog:
Fix memory leak in ads1115_initial | sim
:lua | %% ToTtoatla l % R%e cReeivceedi v%e dX f%er dX f eArvde r aAgvee rSapgee Speed Time Time Time Current |
2026-05-28
14:15:04 | 18984:
drivers/net:
Fix typo in lan9250_set_txavailable f | sim
:lua | v e r a g e S p e e d T i m e T i m e D l oTaidm e U pCluorard e Total Spent n t
0 % Tota l % Received % Xferd Average Speed Time Time Time Current |
2026-05-28
14:06:18 | 3509:
system/lzf:
Fix missing space in Kconfig help text | sim
:lua | Spent Left Speed |
2026-05-28
14:03:00 | 18988:
rtc/ptc85263A:
Add handling of stop_enable flag. | esp32s3-devkit
:adb | D l o a d U p l o a d T o t a l S p e nDtl o a d L eUfptl o aSdp e e dT
otal |
2026-05-28
14:02:13 | 18988:
rtc/ptc85263A:
Add handling of stop_enable flag. | esp32s3-devkit
:pwm | Killing pytest after timeout... |
2026-05-28
14:00:55 | 18986:
drivers/analog:
Fix memory leak and dead code in m | esp32s3-devkit
:toywasm | (Same) |
2026-05-28
13:45:58 | 18950:
libs:
libc:
armv8-m:
Enable ARMV8M_STRING_FUNCTION | mps3-an547
:clang | ##[error]machine/arm/armv8-m/arch_strcpy.S:215:5: error: invalid instruction, any one of the following would fix this:
lsrs r6, 0
^
machine/arm/armv8-m/arch_strcpy.S:215:14: note: operand must be an immediate in the range [1,32]
lsrs r6, 0
^
machine/arm/armv8-m/arch_strcpy.S:215:14: note: operand must be a register in range [r0, r12] or r14
lsrs r6, 0
^
make[1]: *** [Makefile:151: bin/arch_strcpy.o] Error 1
make[1]: Target 'libc.a' not remade because of errors.
make: *** [to |
2026-05-28
13:45:26 | 18988:
rtc/ptc85263A:
Add handling of stop_enable flag. | esp32p4-function-ev-board
:timers | Killing pytest after timeout... |
2026-05-28
13:43:51 | 18950:
libs:
libc:
armv8-m:
Enable ARMV8M_STRING_FUNCTION | mps2-an521
:nsh | arm-none-eabi-ld: /github/workspace/sources/nuttx/staging/libfs.a(fs_tmpfs.o): in function `tmpfs_find_object':
make[1]: *** [Makefile:230: nuttx] Error 1
make: *** [tools/Unix.mk:569: nuttx] Error 2
make: Target 'all' not remade because of errors. |
2026-05-28
13:06:45 | 18950:
libs:
libc:
armv8-m:
Enable ARMV8M_STRING_FUNCTION | imx93-qsb
:nsh | 9a10
> # CONFIG_ARMV8M_STRING_FUNCTION is not set
21d21
< CONFIG_ARMV8M_STRING_FUNCTION=n
Saving the new configuration file |
2026-05-28
13:06:09 | 18986:
drivers/analog:
Fix memory leak and dead code in m | stm32f103-minimum
:adb | i m e C ur r e n t
D l o a d U p l oDaldo a d T oUtpallo a d S p enTto t a l L e fStp e nStp e e d
Lef
t 0S p e e d |
2026-05-28
13:06:04 | 18950:
libs:
libc:
armv8-m:
Enable ARMV8M_STRING_FUNCTION | imx93-qsb
:nsh-ddr | 9a10
> # CONFIG_ARMV8M_STRING_FUNCTION is not set
21d21
< CONFIG_ARMV8M_STRING_FUNCTION=n
Saving the new configuration file |
2026-05-28
13:00:59 | 18950:
libs:
libc:
armv8-m:
Enable ARMV8M_STRING_FUNCTION | imx93-qsb
:rpmsg | (Same) |
2026-05-28
11:35:36 | 18988:
rtc/ptc85263A:
Add handling of stop_enable flag. | sim
:lua | e S p e e d T i m e TDilmoea d U pTliomaed C uTrorteanlt
S p e n t L e f t Speed
- : - - - - : - - : - - - - : -D-l:o-a-d U p l0oad T%o tTaolt a l S p e n% tR e c e Lievfte d % XSfperede d
Aver
ag e 0S pe e d 0 T i 0m e 0T i m e0 0T i m e 0C u r r e n0 t- |
2026-05-28
11:27:14 | 18984:
drivers/net:
Fix typo in lan9250_set_txavailable f | stm32f103-minimum
:adb | n t
D l oDaldo Uploaadd UTpoltaola d S pTeontta l SLpeenftt S p eLeedf
t S
p e e0 d |
2026-05-28
11:08:43 | 18987:
drivers/analog:
Fix memory leak in ads1115_initial | esp32s3-devkit
:oneshot | Killing pytest after timeout... |
2026-05-28
11:04:42 | 18984:
drivers/net:
Fix typo in lan9250_set_txavailable f | esp32p4-function-ev-board
:psram_usrheap | (Same) |
2026-05-28
10:52:11 | 18987:
drivers/analog:
Fix memory leak in ads1115_initial | esp32p4-function-ev-board
:tickless | (Same) |
2026-05-28
08:57:16 | 18984:
drivers/net:
Fix typo in lan9250_set_txavailable f | sim
:lua | % T % Total % Receivoetd a%l X f e r%d R eAcveeirvaegde %S pXefeedr d TAivmeer a g e TSipmeee d TTiimmee C uTrirmeen t
T i m e C u r r e n t |
2026-05-28
08:45:45 | 18987:
drivers/analog:
Fix memory leak in ads1115_initial | sim
:lua | D%l oTado t aUpll o a d % TRoteacle i v eSpde n%t X f eLredft ASpveeerd
age
S p0e e d 0T i m e 0 T i m0e 0 T i m e T 0i mC eu r r e n0Tt i |
2026-05-28
07:48:04 | 18907:
arm64/am62x:
add initial BeaglePlay and PocketBeag | esp32s3-lcd-ev
:lvgl | Killing pytest after timeout... |
2026-05-28
07:37:10 | 18907:
arm64/am62x:
add initial BeaglePlay and PocketBeag | esp32p4-function-ev-board
:qencoder | (Same) |
2026-05-28
05:32:32 | 18907:
arm64/am62x:
add initial BeaglePlay and PocketBeag | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXffeerrdd AAvveerraaggee SSppeeeedd TTiimmee TTiimmee T iTmiem e C uCurrent
ferd Average Speed Time Time Time Current |
2026-05-28
04:06:17 | 3508:
interpreters/quickjs,testing/nettest:
fix typos in | esp32s3-devkit
:adb | Recei
v e d0 % X f e0r d A0v e r a g e0 S p e e0d T i0m e T0i m e 0 T-i-m:e- - :C-u-r r-e-n:t- |
2026-05-28
04:05:30 | 3508:
interpreters/quickjs,testing/nettest:
fix typos in | esp32s3-devkit
:pwm | Killing pytest after timeout... |
2026-05-28
03:53:05 | 3508:
interpreters/quickjs,testing/nettest:
fix typos in | esp32p4-function-ev-board
:watchdog | (Same) |
2026-05-28
03:51:15 | 3507:
nxinit/Kconfig:
Change `--help--` to `---help---` | esp32p4-function-ev-board
:gpio | (Same) |
2026-05-28
02:49:00 | 3508:
interpreters/quickjs,testing/nettest:
fix typos in | rv-virt
:kfb64 | .fini_array lma 0xc0101009 adjusted to 0xc010100c |
2026-05-28
02:48:01 | 3507:
nxinit/Kconfig:
Change `--help--` to `---help---` | esp32c3-legacy-devkit
:wifi | Speed |
2026-05-28
02:29:54 | 3506:
apps/nxinit:
Make init.rc file path configurable | esp32s3-lcd-ev
:buttons | Killing pytest after timeout... |
2026-05-28
02:17:12 | 3506:
apps/nxinit:
Make init.rc file path configurable | esp32p4-function-ev-board
:tickless | (Same) |
2026-05-28
01:47:20 | 3507:
nxinit/Kconfig:
Change `--help--` to `---help---` | sim
:lua | Dlo % Total % Received % Xferd Average Speed Time Time Time Current
0 % Total % Received % Xferd Average Speed Time Time Time Current |
2026-05-28
01:41:58 | 3506:
apps/nxinit:
Make init.rc file path configurable | stm32f103-minimum
:adb | DDllooaadd UUppllooaadd T oTtoatla l S pSepnetn t L eLfetf t S pSepeede
d |
2026-05-28
00:48:16 | 3506:
apps/nxinit:
Make init.rc file path configurable | esp32-devkitc
:sta_softap | % To
tal % Received % Xferd Average Speed Time Time Time Current |
2026-05-28
00:11:23 | 3506:
apps/nxinit:
Make init.rc file path configurable | sim
:lua | % % Total % Receive dT i%m eX f e r d TAivmeer a gCeu rSrpeenetd
T i m e T i m e T i m e C u r r e n t |
2026-05-27
22:31:24 | 18907:
arm64/am62x:
add initial BeaglePlay and PocketBeag | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-05-27
22:29:52 | 18907:
arm64/am62x:
add initial BeaglePlay and PocketBeag | esp32p4-function-ev-board
:temperature_sensor | (Same) |
2026-05-27
20:06:17 | 18980:
drivers/analog:
fix dead free and memory leak in m | esp32s3-8048S043
:nsh | (Same) |
2026-05-27
20:01:38 | 18907:
arm64/am62x:
add initial BeaglePlay and PocketBeag | sim
:lua | % R0e c e i v e0d % X0f e r d 0A v e r a0g e S p e0e d T i0m e T0i m-e- : - - : -T-i m-e- : -C-u:r-r-e n-t- |
2026-05-27
19:57:31 | 18980:
drivers/analog:
fix dead free and memory leak in m | esp32p4-function-ev-board
:tickless | Killing pytest after timeout... |
2026-05-27
19:41:58 | 18980:
drivers/analog:
fix dead free and memory leak in m | stm32f103-minimum
:adb | f t 0 S p e e d0 |
2026-05-27
18:16:32 | 18978:
arch/sim:
Translate Apple clock IDs for macOS sim | esp32s3-lcd-ev
:lcd | Killing pytest after timeout... |
2026-05-27
18:06:12 | 18978:
arch/sim:
Translate Apple clock IDs for macOS sim | esp32p4-function-ev-board
:qencoder | (Same) |
2026-05-27
17:48:04 | 18980:
drivers/analog:
fix dead free and memory leak in m | sim
:lua | Dloa d %U pTlootaadl T o%t aRlec e i vSepde n%t X f e rLde f tA v eSrpaegeed
Spee
d 0 T i m e 0 T i0m e 0 T i m e0 C u r r0e n t
v e d % X f e r d A v e r a g e S p e ed T i m e D l oaTdi m eU p l o a dT i m eT o tCaulr r e nStp
e n t L e f t DSlopaed Upload Total e d
Spen
t 0 L e f t0 S p e0e d |
2026-05-27
17:24:27 | 18978:
arch/sim:
Translate Apple clock IDs for macOS sim | stm32f103-minimum
:adb | d T i m e D l o aTd i mUep l o a d T i mTeo t aClu r r eSnpte
n t L e f t S p e e d
--:- |
2026-05-27
17:10:42 | 18978:
arch/sim:
Translate Apple clock IDs for macOS sim | esp32s3-devkit
:ksta_softap | 100 |
2026-05-27
16:55:24 | 3504:
system/nxinit:
Add NuttX Init ("NxInit") reopened | esp32s3-devkit
:toywasm | Killing pytest after timeout... |
2026-05-27
16:44:43 | 3504:
system/nxinit:
Add NuttX Init ("NxInit") reopened | esp32p4-function-ev-board
:psram_usrheap | (Same) |
2026-05-27
13:49:12 | 3504:
system/nxinit:
Add NuttX Init ("NxInit") reopened | sim
:lua | l % R e c e i ve d % X f e r d Dload UploaAdv e r aTgoet aSlp e e dS p e nt Left Speed
T |
2026-05-27
13:24:23 | 3504:
system/nxinit:
Add NuttX Init ("NxInit") reopened | sim
:lua | R e c e iv e d % X f e r d A v e r a g e S p e e d TDilmoea d UTpilmoea d TToitmael C uSrrpeenntt
L e f t S p e e d
:-
- - 0- : - - : -0- 00 %0 T o t a0l %0 R e c e i v0e d % X f0e r-d- : -A-v:e-r-a g-e- :S-p-e:e-d- - -T:i-m-e: - - T i m e0 Time Current |
2026-05-27
12:57:46 | 18973:
tools/espressif:
Add UF2 output support | esp32s3-devkit
:adb | Killing pytest after timeout... |
2026-05-27
12:48:08 | 18973:
tools/espressif:
Add UF2 output support | esp32p4-function-ev-board
:gpio | (Same) |
2026-05-27
12:30:14 | 3505:
system/settings:
Bound settings string handling | esp32s3-lcd-ev
:audio | (Same) |
2026-05-27
12:19:56 | 3505:
system/settings:
Bound settings string handling | esp32p4-function-ev-board
:psram_usrheap | (Same) |
2026-05-27
12:16:29 | 18973:
tools/espressif:
Add UF2 output support | stm32f103-minimum
:adb | Dl o a d U p l oad TDoltoaald USppleonatd TLoeftta l S p eSepde
nt
0L e f t 0S p e e d0 |
2026-05-27
10:44:39 | 18973:
tools/espressif:
Add UF2 output support | sim
:lua | %%% T ToTototatalal l % % % R ReRecececeieiviveveded d % % % X XffXefredr d AAvveerraaggee SSppeeeedd TeTirimdme e A v e TrTaiigmeme e S p e e d TT ii mTmeiem e CC uu rr rTerinemtne
t
o t a l S p e n t L e f t S p e e d
D lo a0d U p l o0a d T0o 0 0 t a l 0 S p e n t0 L e ft 0 S-pe-e:d-
-:- |
2026-05-27
10:06:17 | 3505:
system/settings:
Bound settings string handling | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %% Xferd Average Speed Time Time Time Current |
2026-05-27
10:05:24 | 18973:
tools/espressif:
Add UF2 output support | sim
:lua | e r a g e S p e e d T i m e T i m e T i m eD l oCaudr r eUnptl
o a d To t a l S p e n t L e f t S p e e d
Dloa
d 0U p l o a d0 T o0ta l S0p e n t 0 L e ft0 S p e e d0 |
2026-05-27
09:57:45 | 18973:
tools/espressif:
Add UF2 output support | sim
:adb | D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnetn t L eLfetf t S pSepeede
d |
2026-05-26
19:45:30 | 18968:
Fix issues about watchdog timers on ESP32, ESP32-S | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-26
19:37:54 | 3504:
system/nxinit:
Add NuttX Init ("NxInit") reopened | esp32s3-lcd-ev
:audio | (Same) |
2026-05-26
19:35:03 | 3504:
system/nxinit:
Add NuttX Init ("NxInit") reopened | esp32p4-function-ev-board
:nsh | (Same) |
2026-05-26
17:37:19 | 18960:
arch/arm/src/stm32h7:
Add support for CRYP periphe | stm32f103-minimum
:adb | age
S p e0e d 0T i m e 0 T i m0e 0 T i m e 0 C u r r e n0t
--: |
2026-05-26
17:19:40 | 3504:
system/nxinit:
Add NuttX Init ("NxInit") reopened | spresense
:rndis_smp | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:76: argtable3] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/system/argtable3_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
mak |
2026-05-26
14:09:06 | 18966:
arch/sim:
Add MM_FILL_ALLOCATIONS support to sim c | sim
:lua | nt
0L e f t 0S p e e d0
ime Time Time Current |
2026-05-26
10:36:49 | 18962:
arch/sim:
Handle Darwin clock IDs in clock_gettime | stm32f103-minimum
:adb | d |
2026-05-26
10:12:10 | 18962:
arch/sim:
Handle Darwin clock IDs in clock_gettime | rv-virt
:kfb64 | adjusted to 0xc010127c |
2026-05-26
09:14:35 | 18962:
arch/sim:
Handle Darwin clock IDs in clock_gettime | lckfb-szpi-esp32s3
:es7210 | e Time Time Current |
2026-05-26
08:25:39 | 18962:
arch/sim:
Handle Darwin clock IDs in clock_gettime | sim
:lua | - Dload Uplo a d% T oTtoatla l %S pReencte i v e dL e%f tX f eSrpde e dA
vera
g e 0S p e e d 0 T i m0e T0i m e 0 T i m0e C u r r0e n t
0 - - : - - : - - - - : - - : - - - - : - - : - - D l o0ad Upload Total Spent Left Speed |
2026-05-26
06:20:49 | 3502:
build(deps):
bump docker/login-action from 4.0.0 t | esp32s3-8048S043
:touchscreen | Killing pytest after timeout... |
2026-05-26
06:17:34 | 3502:
build(deps):
bump docker/login-action from 4.0.0 t | stm32f4discovery
:adb | % To % Total % Received % Xferd Average Speed Time Time Time Current |
2026-05-26
06:07:49 | 3502:
build(deps):
bump docker/login-action from 4.0.0 t | esp32p4-function-ev-board
:psram_usrheap | Killing pytest after timeout... |
2026-05-26
05:50:33 | 18960:
arch/arm/src/stm32h7:
Add support for CRYP periphe | nucleo-h753zi
:crypto | 12d11
< # CONFIG_TESTING_CRYPTO_AES_EBC is not set
Saving the new configuration file |
2026-05-26
05:36:13 | 3502:
build(deps):
bump docker/login-action from 4.0.0 t | stm32f103-minimum
:adb | Total Spent Left Speed |
2026-05-26
04:06:06 | 18960:
arch/arm/src/stm32h7:
Add support for CRYP periphe | stm32f103-minimum
:adb | t
D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnetn t L eLfte f tS p eSepde
ed |
2026-05-26
04:05:23 | 3501:
apps/tools:
Make hello_rust_cargo buildable with m | esp32s3-8048S043
:sdmmc | Killing pytest after timeout... |
2026-05-26
03:52:45 | 3501:
apps/tools:
Make hello_rust_cargo buildable with m | esp32p4-function-ev-board
:motor | (Same) |
2026-05-26
03:19:55 | 3501:
apps/tools:
Make hello_rust_cargo buildable with m | stm32f103-minimum
:adb | D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnt eLnetft S pLeeefdt
Sp
e e d0 |
2026-05-26
01:53:06 | 18960:
arch/arm/src/stm32h7:
Add support for CRYP periphe | nucleo-h753zi
:crypto | 12d11
< # CONFIG_TESTING_CRYPTO_AES_EBC is not set
Saving the new configuration file |
2026-05-26
01:49:02 | 3501:
apps/tools:
Make hello_rust_cargo buildable with m | sim
:lua | r r e Cnu t r
r e n t
D l o a d D l Uop a ldDo al doU ap dl oT aoUdpt la ol a Td o tS ap leT on tt a Sl p e n LtSe pf et n t L Se pf et e Ld e
Sfpte e
dS
p e0e d |
2026-05-26
00:15:16 | 18960:
arch/arm/src/stm32h7:
Add support for CRYP periphe | stm32f103-minimum
:adb | n t
D l oDaldo a dU p lUopaldo a d T o tTaolt a l S p eSnpte n t Le f tL e fStp e eSdp
eed |
2026-05-25
22:29:10 | 18832:
!boards/boardctl:
Remove BOARDIOC_INIT | esp32s3-lcd-ev
:lvgl | Killing pytest after timeout... |
2026-05-25
22:17:22 | 18832:
!boards/boardctl:
Remove BOARDIOC_INIT | esp32p4-function-ev-board
:nsh | (Same) |
2026-05-25
21:33:05 | 18832:
!boards/boardctl:
Remove BOARDIOC_INIT | stm32f103-minimum
:adb | D l oDaldoa d U plUoplaoda d T oTtoalt a l S p eSnpte n t L eLfetf t S pSepeede
d |
2026-05-25
20:14:00 | 18832:
!boards/boardctl:
Remove BOARDIOC_INIT | sim
:lua | %% %TT ooTttoaatlla l %% %RR eeRcceeeciievvieevdde d%% %XX ffXeefrreddr d AA vvAeevrreaarggaeeg eSS ppSeepeeedde d TT iiTmmieem e TT iiTmmieem e TT iiTmmieem e CC uuCrrurrreernnettn
t
DD llDoolaaodda d UU ppUllpoolaaodda d TT ooTttoaatlla l SS ppSeepnnettn t LL eeLffettf t SS ppSeepeeedde
d |
2026-05-25
20:04:52 | 18832:
!boards/boardctl:
Remove BOARDIOC_INIT | sim
:alsa | svn: E000103: Can't open file '/svn/p/lame/svn/db/revs/4/4943': Software caused connection abort
CMake Error at cmake/nuttx_add_library.cmake:210 (add_library):
Cannot find source file:
/github/workspace/sources/apps/audioutils/lame/lame/libmp3lame/bitstream.c
Call Stack (most recent call first):
/github/workspace/sources/apps/audioutils/lame/CMakeLists.txt:110 (nuttx_add_library)
CMake Error at cmake/nuttx_add_library.cmake:210 (add_library):
No SOURCES given to target: libmp3lame
C |
2026-05-25
18:16:48 | 18959:
arch/risc-v/espressif:
Add LP Mailbox support for | esp32p4-function-ev-board
:watchdog | Killing pytest after timeout... |
2026-05-25
16:35:40 | 18956:
arch/sim:
Stop publishing stale X11 display during | sim
:lua | e d T i m e T i m e D l o a dT i mUep l oCaudr r e nTto
t a l Spent Left Speed |
2026-05-25
14:11:53 | 3502:
build(deps):
bump docker/login-action from 4.0.0 t | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-25
13:58:25 | 3502:
build(deps):
bump docker/login-action from 4.0.0 t | esp32p4-function-ev-board
:nsh | (Same) |
2026-05-25
13:25:37 | 3502:
build(deps):
bump docker/login-action from 4.0.0 t | stm32f103-minimum
:adb | eed |
2026-05-25
10:54:14 | 18957:
cmake:
Fix SIM_TOOLCHAIN using CMake on macOS. | esp32s3-lcd-ev
:lcd | Killing pytest after timeout... |
2026-05-25
10:40:48 | 18957:
cmake:
Fix SIM_TOOLCHAIN using CMake on macOS. | esp32p4-function-ev-board
:watchdog | (Same) |
2026-05-25
10:10:23 | 18957:
cmake:
Fix SIM_TOOLCHAIN using CMake on macOS. | stm32f103-minimum
:adb | d |
2026-05-25
08:57:08 | 18957:
cmake:
Fix SIM_TOOLCHAIN using CMake on macOS. | lckfb-szpi-esp32s3
:es7210 | Spent
0 Le f t 0S p e e d0 |
2026-05-25
08:37:00 | 18957:
cmake:
Fix SIM_TOOLCHAIN using CMake on macOS. | sim
:lua | T i m e T i m e C u r r e n t
D l o a d U p l o a d T o t aDll o a dS p eUnptl oa d LTeoftta l S p eSepde
nt
L0e f t S0p e e d |
2026-05-25
06:44:57 | 18955:
Dockerfile & Docs:
Change bitbucket.org/nuttx/tool | esp32s3-lcd-ev
:lcd | Killing pytest after timeout... |
2026-05-25
06:33:17 | 18956:
arch/sim:
Stop publishing stale X11 display during | sim
:lua | Dlo ad U p0l o a d 0T o-t-a:l- - : -S-p e-n-t: - - : -L-e f-t- : -Speed |
2026-05-25
06:32:48 | 18955:
Dockerfile & Docs:
Change bitbucket.org/nuttx/tool | esp32p4-function-ev-board
:qencoder | Killing pytest after timeout... |
2026-05-25
05:47:58 | 3502:
build(deps):
bump docker/login-action from 4.0.0 t | esp32s3-lcd-ev
:lcd | (Same) |
2026-05-25
05:46:27 | 18954:
build(deps):
bump docker/build-push-action from 7. | esp32s3-lcd-ev
:lvgl | (Same) |
2026-05-25
05:36:54 | 18954:
build(deps):
bump docker/build-push-action from 7. | esp32p4-function-ev-board
:qencoder | (Same) |
2026-05-25
05:22:21 | 3500:
system/settings:
Fix non-cached save deadlock | esp32s3-lcd-ev
:audio | (Same) |
2026-05-25
05:17:52 | 18956:
arch/sim:
Stop publishing stale X11 display during | sim
:lua | v e r a g e S p e e d T i m e T i m e T iDmleo a dC u rUrp eln ot%a
d T o t aT lo t a l % RS ep ce en it v e d %L e Xf t S p e e d
Dloa
d 0U p l o a d0 T o0t a l 0S p e n t0 L e0f t S p e0e d |
2026-05-25
05:00:12 | 18954:
build(deps):
bump docker/build-push-action from 7. | stm32f103-minimum
:adb | n t
D l oDaldo a dU p lUopaldo a d T o tTaol t a lS pe n tS p e n t L e f Lte f tSp e eSdp
eed |
2026-05-25
04:59:39 | 18952:
build(deps):
bump docker/setup-buildx-action from | stm32f103-minimum
:adb | t
D l o a d U p l o a d T o t a l S p e nDtl o a d L eUfptl o aSdp e e dT
ota
l 0 S p e n t0 0 0 0 L e f t0 S p e e d0 |
2026-05-25
04:36:40 | 18954:
build(deps):
bump docker/build-push-action from 7. | rv-virt
:kfb64 | /github/workspace/sources/apps/bin/st3UcszZ: section .fini_array lma 0xc0101009 adjusted to 0xc010100c |
2026-05-25
04:36:40 | 3500:
system/settings:
Fix non-cached save deadlock | stm32f103-minimum
:adb | t
d |
2026-05-25
04:28:37 | 18955:
Dockerfile & Docs:
Change bitbucket.org/nuttx/tool | sim
:lua | T i m e C u r r e n t |
2026-05-25
04:21:58 | 18955:
Dockerfile & Docs:
Change bitbucket.org/nuttx/tool | sim
:adb | t
D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnetn t L eLfetf t S pSepeede
d |
2026-05-25
04:14:17 | 18954:
build(deps):
bump docker/build-push-action from 7. | esp32-devkitc
:mcuboot_update_agent | 4k |
2026-05-25
04:08:31 | 3500:
system/settings:
Fix non-cached save deadlock | nrf52832-dk
:mcuboot_app | CMake Error at /github/workspace/sources/nuttx/build/_deps/mcuboot-subbuild/mcuboot-populate-prefix/src/mcuboot-populate-stamp/download-mcuboot-populate.cmake:170 (message):
Each download failed!
error: downloading 'https://github.com/mcu-tools/mcuboot/archive/e36d3c8d6ca5e0ed1f510f2a7d110f405a7c396b.tar.gz' failed
status_code: 22
status_string: "HTTP response code said error"
log:
--- LOG BEGIN ---
Trying 140.82.116.3:443...
Connected to github.com (140.82.116.3) port 443 (#0)
|
2026-05-25
03:58:16 | 3502:
build(deps):
bump docker/login-action from 4.0.0 t | esp32s2-saola-1
:sta_softap | % To
tal % Received % Xferd Average Speed Time Time Time Current |
2026-05-25
03:50:37 | 3500:
system/settings:
Fix non-cached save deadlock | esp32s3-korvo-2
:rtptools | erage Speed Time Time Time Current |
2026-05-25
03:29:24 | 18952:
build(deps):
bump docker/setup-buildx-action from | sim
:lua | X f e r d A v e r a g e S p e e d T i m e T i mDel o a d TUipmleo a dC u r rTeontta
l S p e n t L e f t S p e e d |
2026-05-25
03:29:15 | 18954:
build(deps):
bump docker/build-push-action from 7. | sim
:lua | % T % Total % Received % Xferd Average Speed Time Time Time Current
o Dload U pload Total Spent Left Speed |
2026-05-25
03:26:25 | 3500:
system/settings:
Fix non-cached save deadlock | lckfb-szpi-esp32s3
:es7210 | ent |
2026-05-24
20:49:59 | 18950:
libs:
libc:
armv8-m:
Enable ARMV8M_STRING_FUNCTION | mps3-an547
:clang | ##[error]machine/arm/armv8-m/arch_strcpy.S:215:5: error: invalid instruction, any one of the following would fix this:
lsrs r6, 0
^
machine/arm/armv8-m/arch_strcpy.S:215:14: note: operand must be an immediate in the range [1,32]
lsrs r6, 0
^
machine/arm/armv8-m/arch_strcpy.S:215:14: note: operand must be a register in range [r0, r12] or r14
lsrs r6, 0
^
make[1]: *** [Makefile:151: bin/arch_strcpy.o] Error 1
make[1]: Target 'libc.a' not remade because of errors.
make: *** [to |
2026-05-24
20:47:56 | 18950:
libs:
libc:
armv8-m:
Enable ARMV8M_STRING_FUNCTION | mps2-an521
:nsh | arm-none-eabi-ld: /github/workspace/sources/nuttx/staging/libfs.a(fs_tmpfs.o): in function `tmpfs_find_object':
make[1]: *** [Makefile:230: nuttx] Error 1
make: *** [tools/Unix.mk:569: nuttx] Error 2
make: Target 'all' not remade because of errors. |
2026-05-24
20:38:02 | 18951:
sim/ft2232h:
Add FT2232H GPIO integration on NuttX | sim
:ft2232h_gpio | Package libftdi1 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libftdi1.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libftdi1' found
In file included from ./sim/sim_ft2232h_ioexpander.c:29:
./sim/sim_ft2232h_ioexpander.h:33:10: fatal error: ftdi.h: No such file or directory
33 | #include
| ^~~~~~~~
compilation terminated.
ERROR: cc failed: 1
command: cc -MT ./sim_ft2232h_ioexpander.o -M '-g' '-fom |
2026-05-24
20:26:29 | 18950:
libs:
libc:
armv8-m:
Enable ARMV8M_STRING_FUNCTION | imx93-qsb
:nsh-ddr | arm-none-eabi-ld: /github/workspace/sources/nuttx/staging/libarch.a(imx9_start.o): in function `__start':
arm-none-eabi-ld: /github/workspace/sources/nuttx/arch/arm/src/chip/imx9_start.c:204:(.text.__start+0x4e): undefined reference to `memcpy'
arm-none-eabi-ld: /github/workspace/sources/nuttx/staging/libarch.a(arm_schedulesigaction.o): in function `memcpy':
arm-none-eabi-ld: /github/workspace/sources/nuttx/staging/libsched.a(nx_start.o): in function `memset':
arm-none-eabi-ld: /github/workspace |
2026-05-24
20:25:48 | 18950:
libs:
libc:
armv8-m:
Enable ARMV8M_STRING_FUNCTION | imx93-qsb
:nsh | (Same) |
2026-05-24
20:25:21 | 18950:
libs:
libc:
armv8-m:
Enable ARMV8M_STRING_FUNCTION | imx93-qsb
:rpmsg | (Same) |
2026-05-24
20:10:56 | 18951:
sim/ft2232h:
Add FT2232H GPIO integration on NuttX | sim
:bastest | sim_bringup.c: In function 'board_gpio_init':
##[error]sim_bringup.c:108:9: error: implicit declaration of function 'sim_ft2232h_gpio_initialize' [-Werror=implicit-function-declaration]
108 | ret = sim_ft2232h_gpio_initialize(0xf0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
##[error]sim_bringup.c:114:9: error: implicit declaration of function 'sim_ft2232h_gpio_get_ioe' [-Werror=implicit-function-declaration]
114 | ioe = sim_ft2232h_gpio_get_ioe();
| ^~~~~~~~~~~~~~~~~~~~~~~~
##[e |
2026-05-24
20:10:22 | 18951:
sim/ft2232h:
Add FT2232H GPIO integration on NuttX | sim
:libcxxtest | (Same) |
2026-05-24
20:10:17 | 18951:
sim/ft2232h:
Add FT2232H GPIO integration on NuttX | sim
:bas | (Same) |
2026-05-24
20:09:36 | 18951:
sim/ft2232h:
Add FT2232H GPIO integration on NuttX | sim
:posix_test | sim_bringup.c: In function 'board_gpio_init':
##[error]sim_bringup.c:108:9: error: implicit declaration of function 'sim_ft2232h_gpio_initialize'; did you mean 'sim_gpio_initialize'? [-Werror=implicit-function-declaration]
108 | ret = sim_ft2232h_gpio_initialize(0xf0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
| sim_gpio_initialize
##[error]sim_bringup.c:114:9: error: implicit declaration of function 'sim_ft2232h_gpio_get_ioe' [-Werror=implicit-function-declaration]
114 | ioe = sim |
2026-05-24
20:09:34 | 18951:
sim/ft2232h:
Add FT2232H GPIO integration on NuttX | sim
:asan | sim_bringup.c: In function 'board_gpio_init':
##[error]sim_bringup.c:108:9: error: implicit declaration of function 'sim_ft2232h_gpio_initialize' [-Werror=implicit-function-declaration]
108 | ret = sim_ft2232h_gpio_initialize(0xf0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
##[error]sim_bringup.c:114:9: error: implicit declaration of function 'sim_ft2232h_gpio_get_ioe' [-Werror=implicit-function-declaration]
114 | ioe = sim_ft2232h_gpio_get_ioe();
| ^~~~~~~~~~~~~~~~~~~~~~~~
##[e |
2026-05-24
20:09:14 | 18951:
sim/ft2232h:
Add FT2232H GPIO integration on NuttX | sim
:posix_spawn | (Same) |
2026-05-24
20:08:21 | 18951:
sim/ft2232h:
Add FT2232H GPIO integration on NuttX | sim
:adb | (Same) |
2026-05-24
20:08:06 | 18951:
sim/ft2232h:
Add FT2232H GPIO integration on NuttX | sim
:elf | (Same) |
2026-05-24
20:06:33 | 18951:
sim/ft2232h:
Add FT2232H GPIO integration on NuttX | sim
:duktape | (Same) |
2026-05-24
20:05:43 | 18951:
sim/ft2232h:
Add FT2232H GPIO integration on NuttX | sim
:crypto | sim_bringup.c: In function 'board_gpio_init':
##[error]sim_bringup.c:108:9: error: implicit declaration of function 'sim_ft2232h_gpio_initialize'; did you mean 'sim_gpio_initialize'? [-Werror=implicit-function-declaration]
108 | ret = sim_ft2232h_gpio_initialize(0xf0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
| sim_gpio_initialize
##[error]sim_bringup.c:114:9: error: implicit declaration of function 'sim_ft2232h_gpio_get_ioe' [-Werror=implicit-function-declaration]
114 | ioe = sim |
2026-05-24
20:05:23 | 18951:
sim/ft2232h:
Add FT2232H GPIO integration on NuttX | sim
:configdata | sim_bringup.c: In function 'board_gpio_init':
##[error]sim_bringup.c:108:9: error: implicit declaration of function 'sim_ft2232h_gpio_initialize' [-Werror=implicit-function-declaration]
108 | ret = sim_ft2232h_gpio_initialize(0xf0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
##[error]sim_bringup.c:114:9: error: implicit declaration of function 'sim_ft2232h_gpio_get_ioe' [-Werror=implicit-function-declaration]
114 | ioe = sim_ft2232h_gpio_get_ioe();
| ^~~~~~~~~~~~~~~~~~~~~~~~
##[e |
2026-05-24
19:59:08 | 18950:
libs:
libc:
armv8-m:
Enable ARMV8M_STRING_FUNCTION | sim
:lua | Rec
e i v0e d % 0X f e r d0 A v e r0a g e S p0e e d 0T i m e 0 T i m e 0 - -T:i-m-e: - Dl-o ad- - :U-p-l:o-a-d - - :T-o-t:a-l- S p e0nt Left Speed
0 C u r r0e n t |
2026-05-24
17:51:54 | 18949:
sim/keyboard:
Translate X11 key codes to NuttX cod | sim
:lua | T i me Time Time Current |
2026-05-24
15:34:43 | 18916:
!drivers:
separate pulse count from PWM driver | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-24
15:23:36 | 18916:
!drivers:
separate pulse count from PWM driver | esp32p4-function-ev-board
:motor | (Same) |
2026-05-24
15:07:56 | 18837:
drivers/serial:
Refactor PL011 to be general-purpo | fvp-armv8r-aarch32
:nsh | 27,29d26
< CONFIG_FVP_ARMV8R_UART0=y
< CONFIG_FVP_ARMV8R_UART2=y
< CONFIG_FVP_ARMV8R_UART3=y
32a30,32
> CONFIG_FVP_ARMV8R_UART0=y
> CONFIG_FVP_ARMV8R_UART2=y
> CONFIG_FVP_ARMV8R_UART3=y
Saving the new configuration file |
2026-05-24
15:02:00 | 18837:
drivers/serial:
Refactor PL011 to be general-purpo | qemu-armv8a
:citest | Traceback (most recent call last):
File "/usr/local/bin/ntfc", line 6, in
sys.exit(main())
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 1485, in __call__
return self.main(*args, **kwargs)
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 1416, in main
ctx.exit()
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 737, in exit
self.close()
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 621, |
2026-05-24
14:31:49 | 18837:
drivers/serial:
Refactor PL011 to be general-purpo | sim
:lua | % %T oTtoatla l % R%e cReeicveeidv e%d X%f eXrfde r dA v eArvaegrea gSep eSedp e e dT i m eT i m e T i m eT im e T iTmiem e C uCrurrreenntt
d
r d A v e r a g e S p e e d T i mDel o a d T iUmpel o a d T iTmoet a lC u r rSepnetn
t L e f t Speed |
2026-05-24
14:12:23 | 18367:
boards/arm/s32k3xx/mr-canhubk3:
add missing sram.l | imx93-qsb
:rpmsg | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of open-amp.zip or
open-amp.zip.zip, and cannot find open-amp.zip.ZIP, period.
make[1]: *** [open-amp.defs:67: open-amp.zip] Error 9
make[1]: Target 'context' not remade because of errors.
make: * |
2026-05-24
13:17:57 | 18916:
!drivers:
separate pulse count from PWM driver | sim
:lua | T i m e T i mDel o a d TUipmleo a dC u r rTeontta
l S p e n t L e f t S p e e d
D0l o a d 0U p l o a0d T o0t a l 0 S p e n t0 L e f0t S p e e0d
--:--:
d T i m e T i m e T i Dload Uplomade CTuortraeln t
S p e n t L e f t S p e e d
0 D l o0a d U p0l o a d 0 T o t a0l S p0e n t 0L e f t S0p e-e-d:
--:-- - |
2026-05-24
10:53:02 | 18916:
!drivers:
separate pulse count from PWM driver | esp32s3-8048S043
:i2c | Killing pytest after timeout... |
2026-05-24
10:40:56 | 18916:
!drivers:
separate pulse count from PWM driver | esp32p4-function-ev-board
:watchdog | (Same) |
2026-05-24
10:07:21 | 18916:
!drivers:
separate pulse count from PWM driver | stm32f103-minimum
:adb | n t L e f t S p e e d
:-- |
2026-05-24
08:09:39 | 3498:
apps/system/microros:
add libmicroros.a colcon cro | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-24
08:01:18 | 3498:
apps/system/microros:
add libmicroros.a colcon cro | esp32p4-function-ev-board
:nsh | (Same) |
2026-05-24
07:37:30 | 3498:
apps/system/microros:
add libmicroros.a colcon cro | esp32s3-devkit
:sta_softap | nt |
2026-05-24
07:30:11 | 3498:
apps/system/microros:
add libmicroros.a colcon cro | stm32f103-minimum
:adb | % 0T o t a l 0 % 0R e c e i v0e d % 0X f e r d 0 A v e r a g0e S p e e d0 - -T:i-m-e: - - -T-i:m-e- : - - -T-i:m-e- : -C-u r r e n t0 |
2026-05-24
05:56:11 | 3498:
apps/system/microros:
add libmicroros.a colcon cro | sim
:lua | Dlo aXdf e rUdp l oAavde r a gTeo tSaple e d S p eTnitm e L eTfitm e S p e e dT
ime
C u0r r e n t |
2026-05-24
04:59:04 | 3499:
testing/sd_stress:
Handle stale temporary director | esp32p4-function-ev-board
:watchdog | Killing pytest after timeout... |
2026-05-24
02:54:47 | 3499:
testing/sd_stress:
Handle stale temporary director | sim
:lua | e T i m e T i m e C u r r e n t
loa
d 0 T o t a l0 S p0e n t 0 L e f t0 S p e e0d |
2026-05-23
23:42:55 | 3498:
apps/system/microros:
add libmicroros.a colcon cro | esp32s3-lcd-ev
:lvgl | Killing pytest after timeout... |
2026-05-23
23:34:34 | 3498:
apps/system/microros:
add libmicroros.a colcon cro | esp32p4-function-ev-board
:nsh | (Same) |
2026-05-23
22:52:17 | 3498:
apps/system/microros:
add libmicroros.a colcon cro | stm32f103-minimum
:adb | % T oDtlaola d U%p lRoeacde i v eTdo t%a lX f e rSdp e nAtv e r a gLee Sfpte e dS p e eTdi
me
T i m0e T0im e C0u r r e n t0 |
2026-05-23
21:48:37 | 3498:
apps/system/microros:
add libmicroros.a colcon cro | esp32c3-devkit
:sta_softap | t Left Speed |
2026-05-23
21:30:22 | 3498:
apps/system/microros:
add libmicroros.a colcon cro | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvveeerrraaagggeee SSSpppeeeeeeddd TTTiiimmmeee TTTiiimmmeee TTTiiimmmeee CCCuuurrrrrreeennnttt
DDDllloooaaaddd UUUpppllloooaaaddd TTToootttaaalll SSSpppeeennnttt LLLeeefffttt SSSpppeeeeeeddd |
2026-05-23
21:21:28 | 3498:
apps/system/microros:
add libmicroros.a colcon cro | sim
:adb | 00 |
2026-05-23
05:08:58 | 3497:
apps:
Check string allocation failures | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-23
04:57:30 | 3497:
apps:
Check string allocation failures | esp32p4-function-ev-board
:psram_usrheap | (Same) |
2026-05-22
19:08:09 | 18945:
boards/arm/stm32n6/nucleo-n657x0-q:
Add autoleds a | esp32p4-function-ev-board
:temperature_sensor | (Same) |
2026-05-22
18:37:33 | 18945:
boards/arm/stm32n6/nucleo-n657x0-q:
Add autoleds a | stm32f103-minimum
:adb | D lDoaldo a dU p lUpolaoda Tdo t a lT o t aSlp e n tS p e nLte f t LSepfete d S
peed |
2026-05-22
18:32:14 | 17229:
boards/arm/am67:
Add support for T3 Gemstone O1 bo | esp32s3-lcd-ev
:lvgl | Killing pytest after timeout... |
2026-05-22
18:24:50 | 17229:
boards/arm/am67:
Add support for T3 Gemstone O1 bo | esp32p4-function-ev-board
:psram_usrheap | (Same) |
2026-05-22
17:48:08 | 18943:
boards/risc-v/esp32p4:
Add defconfig for Python o | esp32s3-lcd-ev
:lvgl | (Same) |
2026-05-22
17:04:55 | 18945:
boards/arm/stm32n6/nucleo-n657x0-q:
Add autoleds a | sim
:lua | 0A v e r a g0e S p e0e d T i0m e 0 T i m e 0 T i m0e Cu r r e0n t- |
2026-05-22
16:52:15 | 18942:
arch/risc-v:
Fix Espressif timer registering ID | esp32s3-8048S043
:nsh | Killing pytest after timeout... |
2026-05-22
16:51:14 | 18943:
boards/risc-v/esp32p4:
Add defconfig for Python o | stm32f103-minimum
:adb | d |
2026-05-22
16:42:39 | 18942:
arch/risc-v:
Fix Espressif timer registering ID | esp32s3-eye
:wifi | Received % Xferd Average Speed Time Time Time Current |
2026-05-22
16:34:11 | 18942:
arch/risc-v:
Fix Espressif timer registering ID | esp32p4-function-ev-board
:temperature_sensor | Killing pytest after timeout... |
2026-05-22
16:30:17 | 18944:
arch/arm/stm32h5/stm32_ethernet:
Add missing netde | stm32f103-minimum
:adb | D lDolaoda d U pUlpolaoda d T oTtoatlal SSppeenntt LLeefftt SSppeeeedd |
2026-05-22
16:14:49 | 17229:
boards/arm/am67:
Add support for T3 Gemstone O1 bo | sim
:lua | ver a% Total % Received % Xferd Average Speed Time Time Time Current
ge Spe % Total % Received % Xferd Average Speed Timed e Time Time Current
Time
Current
--:--: |
2026-05-22
15:57:18 | 18941:
arch/risc-v:
Clear BSS section for RISC-V-based Es | esp32p4-function-ev-board
:watchdog | Killing pytest after timeout... |
2026-05-22
15:13:24 | 18943:
boards/risc-v/esp32p4:
Add defconfig for Python o | sim
:lua | i v e d % X f e r d A v e r a g e S p e e d TDilmoea d UTpilmoea d TToitmale CSuprernetn t
L e f t S p ee d
-:--: |
2026-05-22
14:55:08 | 18942:
arch/risc-v:
Fix Espressif timer registering ID | lckfb-szpi-esp32s3
:es7210 | C u r r e n t |
2026-05-22
14:29:13 | 3496:
nshlib:
fix infinite loop on broken stdout in nsh_ | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-22
14:28:22 | 3496:
nshlib:
fix infinite loop on broken stdout in nsh_ | esp32p4-function-ev-board
:nsh | (Same) |
2026-05-22
14:24:16 | 17229:
boards/arm/am67:
Add support for T3 Gemstone O1 bo | sim
:lua | %%% TTToootttaaalll %%% RRReecececeieiviveveded d % % % X XfXfefererdd AAvveerargaeg eS pSepeede d Tirmde A v eTriamgee S p e eTdi m e T iCmuer r e n tT
i m e T i m e C u r r e n t |
2026-05-22
11:48:39 | 3496:
nshlib:
fix infinite loop on broken stdout in nsh_ | esp32s2-saola-1
:wifi | l % Received % Xferd Average Speed Time Time Time Current |
2026-05-22
11:43:14 | 3496:
nshlib:
fix infinite loop on broken stdout in nsh_ | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXffeerrdd AAvveerraaggee SSppeeeedd Time Time Time Current
Tim
e 0 T i m0e C u0r r e n t
S p eDnlto a d LUepflto a dS p e eTdo
tal
S0p e n t 0 L e f0t S p e0e d |
2026-05-22
11:33:50 | 3496:
nshlib:
fix infinite loop on broken stdout in nsh_ | esp32-audio-kit
:audio | me Time Current |
2026-05-22
11:05:57 | 3495:
interpreters/python:
Add libffi package integrati | esp32p4-function-ev-board
:psram_usrheap | Killing pytest after timeout... |
2026-05-22
10:02:49 | 18940:
arch/risc-v/espressif:
Fix CMake build issues for | esp32p4-function-ev-board
:pwm | (Same) |
2026-05-22
08:58:04 | 3495:
interpreters/python:
Add libffi package integrati | sim
:lua | T i m e C u r r e n t
D l o a d U p l o a d DTlootaadl U pSlpoeandt T oLteaflt SSppeeendt
L e f0t S p e0e d
-1-0 0 3 0 3074
% To |
2026-05-22
06:28:13 | 18937:
golfish_gpu_fb:
clear fb when initialization | esp32s3-lcd-ev
:lcd | Killing pytest after timeout... |
2026-05-22
06:25:45 | 18938:
drivers/video:
use spinlock to replace critical se | esp32p4-function-ev-board
:motor | (Same) |
2026-05-22
06:23:23 | 18937:
golfish_gpu_fb:
clear fb when initialization | esp32p4-function-ev-board
:temperature_sensor | (Same) |
2026-05-22
06:08:31 | 18938:
drivers/video:
use spinlock to replace critical se | esp32-ethernet-kit
:rtc | (Same) |
2026-05-22
06:02:59 | 18938:
drivers/video:
use spinlock to replace critical se | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-22
06:02:35 | 18937:
golfish_gpu_fb:
clear fb when initialization | qemu-armv7a
:smp | (Same) |
2026-05-22
05:53:28 | 18936:
arch/tricore:
Add hardware debug breakpoint and wa | esp32s3-lcd-ev
:lvgl | Killing pytest after timeout... |
2026-05-22
05:36:48 | 18938:
drivers/video:
use spinlock to replace critical se | stm32f103-minimum
:adb | DDllooaadd UUppllooaadd T oTtaolt a lS p e nSpentt LLeefftt SSppeeeedd |
2026-05-22
05:29:58 | 18936:
arch/tricore:
Add hardware debug breakpoint and wa | esp32p4-function-ev-board
:nsh | Killing pytest after timeout... |
2026-05-22
05:18:03 | 18936:
arch/tricore:
Add hardware debug breakpoint and wa | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-22
04:20:46 | 18938:
drivers/video:
use spinlock to replace critical se | sim
:lua | r a g e S pe e d T im e D l o aTdim e U p l o Taidm e TCoutrraeln t
S p e n t Left Speed |
2026-05-22
03:50:07 | 18935:
arch/arm/stm32h5/i2c:
Fix warning message about us | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-22
03:24:38 | 18936:
arch/tricore:
Add hardware debug breakpoint and wa | sim
:lua | T i m e T i m e D l oaCdu rUrpleonadt
T ot a l S p en t L e ft S p ee d
:-- |
2026-05-22
03:10:03 | 3494:
examples/rust:
Fix hello_rust_cargo CMake settings | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-22
02:38:25 | 3494:
examples/rust:
Fix hello_rust_cargo CMake settings | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-22
02:09:05 | 18935:
arch/arm/stm32h5/i2c:
Fix warning message about us | stm32f103-minimum
:adb | D lDoaldo a dU pUlplooaad dTo t a lT o t aSlp e n tS p e nLte f t LSepfete d
Spee
d |
2026-05-22
02:00:15 | 18922:
arch/arm/stm32h5:
Add ethernet hardware checksum | nucleo-h743zi
:mcuboot-app | CMake Error at /github/workspace/sources/nuttx/build/_deps/mcuboot-subbuild/mcuboot-populate-prefix/src/mcuboot-populate-stamp/download-mcuboot-populate.cmake:170 (message):
Each download failed!
error: downloading 'https://github.com/mcu-tools/mcuboot/archive/e36d3c8d6ca5e0ed1f510f2a7d110f405a7c396b.tar.gz' failed
status_code: 22
status_string: "HTTP response code said error"
log:
--- LOG BEGIN ---
Trying 140.82.114.4:443...
Connected to github.com (140.82.114.4) port 443 (#0)
|
2026-05-22
00:57:50 | 18922:
arch/arm/stm32h5:
Add ethernet hardware checksum | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-22
00:53:16 | 3494:
examples/rust:
Fix hello_rust_cargo CMake settings | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvveeerrraaagggeee SSppSeepeeedde d TT iiTmmieem e TT iiTmmieem e TT iiTmmieem e CC uuCrrurrreernnettn
t
DD llDoolaaodda d UU ppUllpoolaaodda d TT ooTttoaatlla l SS ppSeepnnettn t LL eeLffettf t SS ppSeepeeedde
d |
2026-05-22
00:00:46 | 18922:
arch/arm/stm32h5:
Add ethernet hardware checksum | stm32f103-minimum
:adb | t
DDllooaadd UUppllooaad d T oTottaall SSppeenntt L eLfetf t S pSepeede
d |
2026-05-21
19:52:55 | 18933:
drivers/usbhost_hidmouse:
fix button detection in | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-21
19:40:30 | 18933:
drivers/usbhost_hidmouse:
fix button detection in | esp32p4-function-ev-board
:watchdog | (Same) |
2026-05-21
19:08:08 | 18933:
drivers/usbhost_hidmouse:
fix button detection in | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-21
17:57:15 | 18933:
drivers/usbhost_hidmouse:
fix button detection in | lckfb-szpi-esp32s3
:es7210 | vera
g e 0S p e e d 0 T i m0e T0i m e 0 T i m0e C u r r0e n t
0 - - : - - : - - - - : - - : - - - - : - - : - - D l o0ad Upload Total Spent Left Speed |
2026-05-21
16:28:05 | 18933:
drivers/usbhost_hidmouse:
fix button detection in | sim
:lua | D%l oTaodt a lU p l o a%d R Total Spent Left Speed |
2026-05-21
15:48:06 | 18931:
arch/risc-v:
Enable setting cache line size for ES | esp32p4-function-ev-board
:i2schar | Killing pytest after timeout... |
2026-05-21
14:31:26 | 18930:
arch/arm/imx9:
Add SAR ADC support | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-21
13:33:59 | 18930:
arch/arm/imx9:
Add SAR ADC support | stm32f103-minimum
:adb | t
D l o0a d U p0l o a d 0 T o t a0l S0p e n t 0 L e f t 0 S p e e d
0 - |
2026-05-21
12:27:27 | 18927:
arch/tricore:
Support setjmp and longjmp. | esp32p4-function-ev-board
:i2schar | Killing pytest after timeout... |
2026-05-21
11:44:48 | 18927:
arch/tricore:
Support setjmp and longjmp. | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-21
10:43:42 | 18927:
arch/tricore:
Support setjmp and longjmp. | esp32-devkitc
:wifi | 100 |
2026-05-21
10:18:31 | 18927:
arch/tricore:
Support setjmp and longjmp. | sim
:lua | L e f t S p e e d |
2026-05-21
09:54:21 | 18925:
boards/xtensa/esp32:
increase MM_REGIONS for psram | esp32s3-eye
:lcd | Killing pytest after timeout... |
2026-05-21
09:33:38 | 18925:
boards/xtensa/esp32:
increase MM_REGIONS for psram | esp32s3-devkit
:sta_softap | curl: (28) Failed to connect to github.com port 443 after 133264 ms: Connection timed out
make[3]: *** [Makefile:55: v1.7.12.tar.gz] Error 28
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/netutils/cjson_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
make: Target 'all' |
2026-05-21
09:20:22 | 18925:
boards/xtensa/esp32:
increase MM_REGIONS for psram | esp32s3-devkit
:qemu_debug | b.com port 443 after 136283 ms: cCuornln:e c(t2i8o)n Ftaiimleedd otuot
connect to github.com port 443 after 135689 ms: Connection timed out
make[3]: *** [Makefile:73: v3.2.0.7402e6e.tar.gz] Error 28
make[1]: *** [littlefs/Make.defs:65: v2.5.1.tar.gz] Error 28
make[3]: Target 'context' not remade because of errors.
make[1]: Target 'context' not remade because of errors.
make: *** [tools/Unix.mk:471: fs/.context] Error 2
make[2]: *** [Makefile:57: /github/workspace/sources/apps/system/a |
2026-05-21
09:17:56 | 18925:
boards/xtensa/esp32:
increase MM_REGIONS for psram | esp32s3-devkit
:toywasm | curl: (28) Failed to connect to github.com port 443 after 132642 ms: Connection timed out
make[1]: *** [littlefs/Make.defs:65: v2.10.1.tar.gz] Error 28
make[1]: Target 'context' not remade because of errors.
make: *** [tools/Unix.mk:471: fs/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-05-21
09:13:59 | 18925:
boards/xtensa/esp32:
increase MM_REGIONS for psram | esp32s3-devkit
:ble | curl: (28) Failed to connect to github.com port 443 after 134644 ms: Connection timed out
make[3]: *** [Makefile:73: v3.2.0.7402e6e.tar.gz] Error 28
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/system/argtable3_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
make: Targ |
2026-05-21
08:49:25 | 3493:
apps/cmake:
Remove stale in-source builtin headers | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-21
08:40:39 | 3493:
apps/cmake:
Remove stale in-source builtin headers | esp32p4-function-ev-board
:psram_usrheap | (Same) |
2026-05-21
08:26:46 | 3493:
apps/cmake:
Remove stale in-source builtin headers | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-21
08:11:24 | 3493:
apps/cmake:
Remove stale in-source builtin headers | stm32f103-minimum
:adb | DDllooaadd UUppllooaadd TTototaal l S p eSnpte n t L e fLte f tS p eSepde
ed |
2026-05-21
07:46:12 | 3492:
apps/system/microros:
add empty library skeleton | esp32s3-lcd-ev
:lvgl | Killing pytest after timeout... |
2026-05-21
07:33:55 | 3492:
apps/system/microros:
add empty library skeleton | esp32p4-function-ev-board
:bmp180 | (Same) |
2026-05-21
07:14:03 | 3492:
apps/system/microros:
add empty library skeleton | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-21
06:35:57 | 3493:
apps/cmake:
Remove stale in-source builtin headers | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvveeerrraaagggeee SSppeeeedd TTiimmee TTiimmee TTiimmee CCuurrrreenntt
v e r a g e DSlpoeaedd Up lToiamde T o tTailm e S p e n tT i m eL e fCt u rSrpeenetd |
2026-05-21
05:28:34 | 3492:
apps/system/microros:
add empty library skeleton | sim
:lua | e C u r r e n t
DD ll oo aa dd UU ppll oo aa dd TTDoolttoaaalld USSpppleeonnattd TLLoeetffattl SS ppSeepeeeddn
t
L e00f t S p00e e d
00 |
2026-05-21
02:47:19 | 18924:
sim:
resolve host symbols eagerly on Linux | sim
:lua | C u r r e n t
D l o a d U p lDolaoda d TUoptlaola d S pToetnatl SLpeefntt S p eLeedf
t S
p e e0d |
2026-05-21
02:37:18 | 18923:
sim:
pass no-pie through gcc driver | sim
:citest | Traceback (most recent call last):
File "/usr/local/bin/ntfc", line 6, in
sys.exit(main())
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 1485, in __call__
return self.main(*args, **kwargs)
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 1416, in main
ctx.exit()
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 737, in exit
self.close()
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 621, |
2026-05-21
02:28:43 | 18923:
sim:
pass no-pie through gcc driver | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvveeerrraaagggeee SSSpppeeeeeeddd TTTiiimmmeee TTTiiimmmeee TTTiiimmmeee CCCuuurrrrrreeennnttt
DDDllloooaaaddd UUUpppllloooaaaddd TTToootttaaalll SSSpppeenenttn t L Le efLftet f t S Sp peSeepeded
e
d |
2026-05-21
02:08:01 | 18924:
sim:
resolve host symbols eagerly on Linux | sim
:lua | S p e n t L e f t S p e e d
Dlo
a d 0 U p l o a0d T0o t a l 0 S p e n0t Left Speed |
2026-05-21
01:00:26 | 18922:
arch/arm/stm32h5:
Add ethernet hardware checksum | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-21
00:32:46 | 3492:
apps/system/microros:
add empty library skeleton | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-21
00:19:25 | 3492:
apps/system/microros:
add empty library skeleton | esp32p4-function-ev-board
:i2schar | (Same) |
2026-05-20
23:59:35 | 3492:
apps/system/microros:
add empty library skeleton | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
23:51:10 | 3492:
apps/system/microros:
add empty library skeleton | stm32f103-minimum
:adb | T i m e C u r r e n t
D l o a d U p l o a d D l oTaodt aUlp l o aSdp e n tT o t a lL e f tS p eSnpte e d
Lef
t 0S p e e d0 |
2026-05-20
23:14:54 | 18921:
boards/arm/stm32h7:
Add support for nucleo-h753zi | esp32s3-lcd-ev
:lcd | Killing pytest after timeout... |
2026-05-20
23:10:07 | 18921:
boards/arm/stm32h7:
Add support for nucleo-h753zi | esp32p4-function-ev-board
:bmp180 | (Same) |
2026-05-20
22:53:33 | 3492:
apps/system/microros:
add empty library skeleton | esp32c3-legacy-devkit
:wifi | ime Time Current |
2026-05-20
22:38:06 | 18921:
boards/arm/stm32h7:
Add support for nucleo-h753zi | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
22:29:26 | 18921:
boards/arm/stm32h7:
Add support for nucleo-h753zi | stm32f103-minimum
:adb | n t L e f t D l oSapde e dU
ploa
d 0 T o t a l0 S p0e n t 0 L e f t0 Sp e e d0 |
2026-05-20
22:16:06 | 3492:
apps/system/microros:
add empty library skeleton | sim
:lua | T i m e T i m e T i m e C u r r e n t
D l o a d U p l o a d T o t a l S p e n t LDelfota d S pUepeldo
ad
T o0t a l 0S p e n t0 L e0f t S0p e e d |
2026-05-20
21:37:39 | 3492:
apps/system/microros:
add empty library skeleton | qemu-armv8a
:nsh_smp | /d/a/nuttx-apps/nuttx-apps/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
/d/a/nuttx-apps/nuttx-apps/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make[1]: *** [tools/Unix.mk:423: /d/a/nuttx-apps/nuttx-apps/sources/apps/.dirlinks] Error 2
make: *** [tools/Unix.mk:744: olddefconfig] Error 2
/d/a/nuttx-apps/nuttx-apps/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make: *** [tools/Unix.mk:423: /d/a/nuttx-apps/nuttx-apps |
2026-05-20
21:36:57 | 3492:
apps/system/microros:
add empty library skeleton | nucleo-f411re
:nsh | /d/a/nuttx-apps/nuttx-apps/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
/d/a/nuttx-apps/nuttx-apps/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make[1]: *** [tools/Unix.mk:423: /d/a/nuttx-apps/nuttx-apps/sources/apps/.dirlinks] Error 2
make: *** [tools/Unix.mk:744: olddefconfig] Error 2
/d/a/nuttx-apps/nuttx-apps/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
/d/a/nuttx-apps/nuttx-apps/sources/apps/system/microros/ |
2026-05-20
21:30:35 | 3492:
apps/system/microros:
add empty library skeleton | esp32c3-devkit
:mcuboot_update_agent | /github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make[1]: *** [tools/Unix.mk:423: /github/workspace/sources/apps/.dirlinks] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [tools/Unix.mk:744: olddefconfig] Error 2
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make: *** [tools/Unix.mk:423: /github/worksp |
2026-05-20
21:30:33 | 3492:
apps/system/microros:
add empty library skeleton | esp32c3-devkit
:mcuboot_nsh | (Same) |
2026-05-20
21:30:31 | 3492:
apps/system/microros:
add empty library skeleton | esp32c3-devkit
:i2c | (Same) |
2026-05-20
21:30:30 | 3492:
apps/system/microros:
add empty library skeleton | esp32c3-devkit
:pm | (Same) |
2026-05-20
21:30:28 | 3492:
apps/system/microros:
add empty library skeleton | esp32c3-devkit
:spiflash | (Same) |
2026-05-20
21:30:26 | 3492:
apps/system/microros:
add empty library skeleton | esp32c3-devkit
:random | (Same) |
2026-05-20
21:30:24 | 3492:
apps/system/microros:
add empty library skeleton | esp32c3-devkit
:spi | (Same) |
2026-05-20
21:30:23 | 3492:
apps/system/microros:
add empty library skeleton | esp32c3-devkit
:adc | (Same) |
2026-05-20
21:30:22 | 3492:
apps/system/microros:
add empty library skeleton | qemu-intel64
:jumbo | /github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make[1]: *** [tools/Unix.mk:423: /github/workspace/sources/apps/.dirlinks] Error 2
make: *** [tools/Unix.mk:744: olddefconfig] Error 2
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make: *** [tools/Unix.mk:423: /github/workspace/sources/apps/.dirlinks] Error 2
make: Tar |
2026-05-20
21:30:21 | 3492:
apps/system/microros:
add empty library skeleton | esp32c3-devkit
:rmt | /github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make[1]: *** [tools/Unix.mk:423: /github/workspace/sources/apps/.dirlinks] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [tools/Unix.mk:744: olddefconfig] Error 2
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make: *** [tools/Unix.mk:423: /github/worksp |
2026-05-20
21:30:20 | 3492:
apps/system/microros:
add empty library skeleton | qemu-intel64
:knsh_romfs | /github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make[1]: *** [tools/Unix.mk:423: /github/workspace/sources/apps/.dirlinks] Error 2
make: *** [tools/Unix.mk:744: olddefconfig] Error 2
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make: *** [tools/Unix.mk:423: /github/workspace/sources/apps/.dirlinks] Error 2
make: Tar |
2026-05-20
21:30:19 | 3492:
apps/system/microros:
add empty library skeleton | esp32c3-devkit
:wifi | /github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make[1]: *** [tools/Unix.mk:423: /github/workspace/sources/apps/.dirlinks] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [tools/Unix.mk:744: olddefconfig] Error 2
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make: *** [tools/Unix.mk:423: /github/worksp |
2026-05-20
21:30:18 | 3492:
apps/system/microros:
add empty library skeleton | esp32c3-devkit
:gpio | (Same) |
2026-05-20
21:30:17 | 3492:
apps/system/microros:
add empty library skeleton | qemu-intel64
:nsh | /github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make[1]: *** [tools/Unix.mk:423: /github/workspace/sources/apps/.dirlinks] Error 2
make: *** [tools/Unix.mk:744: olddefconfig] Error 2
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make: *** [tools/Unix.mk:423: /github/workspace/sources/apps/.dirlinks] Error 2
make: Tar |
2026-05-20
21:30:15 | 3492:
apps/system/microros:
add empty library skeleton | qemu-intel64
:fb | (Same) |
2026-05-20
21:30:13 | 3492:
apps/system/microros:
add empty library skeleton | qemu-intel64
:earlyfb | (Same) |
2026-05-20
21:30:10 | 3492:
apps/system/microros:
add empty library skeleton | qemu-intel64
:lvgl | (Same) |
2026-05-20
21:30:08 | 3492:
apps/system/microros:
add empty library skeleton | qemu-intel64
:ostest | (Same) |
2026-05-20
21:30:06 | 3492:
apps/system/microros:
add empty library skeleton | qemu-intel64
:nsh_pci | (Same) |
2026-05-20
21:30:04 | 3492:
apps/system/microros:
add empty library skeleton | qemu-intel64
:nsh_pci_smp | (Same) |
2026-05-20
21:30:01 | 3492:
apps/system/microros:
add empty library skeleton | qemu-intel64
:knsh_romfs_pci | (Same) |
2026-05-20
21:29:21 | 3492:
apps/system/microros:
add empty library skeleton | micropendous3
:hello | (Same) |
2026-05-20
21:28:39 | 3492:
apps/system/microros:
add empty library skeleton | esp32-audio-kit
:audio | (Same) |
2026-05-20
21:28:35 | 3492:
apps/system/microros:
add empty library skeleton | sim
:configdata | (Same) |
2026-05-20
21:28:31 | 3492:
apps/system/microros:
add empty library skeleton | sim
:adb | (Same) |
2026-05-20
21:28:20 | 3492:
apps/system/microros:
add empty library skeleton | sabre-6quad
:netnsh | /github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make[1]: *** [tools/Unix.mk:423: /github/workspace/sources/apps/.dirlinks] Error 2
make: *** [tools/Unix.mk:744: olddefconfig] Error 2
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
|
2026-05-20
21:28:16 | 3492:
apps/system/microros:
add empty library skeleton | lpc4088-quickstart
:nsh | (Same) |
2026-05-20
21:28:15 | 3492:
apps/system/microros:
add empty library skeleton | bl602evb
:gpio | /github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make[1]: *** [tools/Unix.mk:423: /github/workspace/sources/apps/.dirlinks] Error 2
make: *** [tools/Unix.mk:744: olddefconfig] Error 2
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make: *** [tools/Unix.mk:423: /github/workspace/sources/apps/.dirlinks] Error 2
make: Tar |
2026-05-20
21:27:57 | 3492:
apps/system/microros:
add empty library skeleton | franzininho-wifi
:nsh | (Same) |
2026-05-20
21:27:43 | 3492:
apps/system/microros:
add empty library skeleton | pcduino-a10
:nsh | /github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make[1]: *** [tools/Unix.mk:423: /github/workspace/sources/apps/.dirlinks] Error 2
make: *** [tools/Unix.mk:744: olddefconfig] Error 2
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
|
2026-05-20
21:27:41 | 3492:
apps/system/microros:
add empty library skeleton | fvp-armv8r
:citest_smp | /github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make[1]: *** [tools/Unix.mk:423: /github/workspace/sources/apps/.dirlinks] Error 2
make: *** [tools/Unix.mk:744: olddefconfig] Error 2
/github/workspace/sources/apps/system/microros/Make.defs:1: *** missing separator. Stop.
make: *** [tools/Unix.mk:423: /github/workspace/sources/apps/.dirlinks] Error 2
make: Tar |
2026-05-20
20:59:31 | 18921:
boards/arm/stm32h7:
Add support for nucleo-h753zi | sim
:lua | C u r0r
e n t0
% R |
2026-05-20
20:31:01 | 18861:
boards/raspberrypi-4b:
Implement SMP support | raspberrypi-4b
:smp | 51d50
< CONFIG_SYSTEM_TIME64=y
Saving the new configuration file |
2026-05-20
19:29:09 | 18921:
boards/arm/stm32h7:
Add support for nucleo-h753zi | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
19:22:54 | 18921:
boards/arm/stm32h7:
Add support for nucleo-h753zi | esp32p4-function-ev-board
:i2schar | Killing pytest after timeout... |
2026-05-20
18:35:06 | 3489:
nshlib/testing:
Fix open() arguments. | esp32s3-lcd-ev
:lcd | (Same) |
2026-05-20
18:22:52 | 3489:
nshlib/testing:
Fix open() arguments. | esp32p4-function-ev-board
:tickless | (Same) |
2026-05-20
18:20:18 | 3489:
nshlib/testing:
Fix open() arguments. | stm32f103-minimum
:adb | T i m e T i m e C u r r e n t
D l o a d U p l o a d T o t a l S pDelnota d ULpelfota d S pTeoetda
l S
p e n0t L0e f t 0S p e e d0 |
2026-05-20
18:02:06 | 3489:
nshlib/testing:
Fix open() arguments. | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
17:27:25 | 18910:
arch/tricore:
Improve up_backtrace implementation | esp32s3-lcd-ev
:lvgl | Killing pytest after timeout... |
2026-05-20
17:19:57 | 18910:
arch/tricore:
Improve up_backtrace implementation | esp32p4-function-ev-board
:watchdog | (Same) |
2026-05-20
17:12:14 | 18920:
kinetis/pinirq:
Drop assert for out pin interrupts | esp32s3-lcd-ev
:audio | (Same) |
2026-05-20
17:05:38 | 18921:
boards/arm/stm32h7:
Add support for nucleo-h753zi | sim
:lua | T i m0e T0i m e 0C u r r e n0t |
2026-05-20
16:59:49 | 18921:
boards/arm/stm32h7:
Add support for nucleo-h753zi | esp32c3-devkit
:wifi | eived % Xferd Average Speed Time Time Time Current |
2026-05-20
16:55:55 | 18920:
kinetis/pinirq:
Drop assert for out pin interrupts | esp32p4-function-ev-board
:watchdog | Killing pytest after timeout... |
2026-05-20
16:54:39 | 18921:
boards/arm/stm32h7:
Add support for nucleo-h753zi | sim
:adb | e n t
D l o aDdl o aUdp l oUapdl o a dT o t aTlo t a lS p e nStp e n t L e f tL e fStp e eSdp
eed |
2026-05-20
16:53:11 | 18910:
arch/tricore:
Improve up_backtrace implementation | stm32f103-minimum
:adb | (Same) |
2026-05-20
16:50:07 | 18910:
arch/tricore:
Improve up_backtrace implementation | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
16:44:01 | 18920:
kinetis/pinirq:
Drop assert for out pin interrupts | stm32f103-minimum
:adb | t
D l oDaldo a dU p lUopaloda d ToTtoalt a l S p enStp e n t Le f t L Sepfete d
Sp
e e d0 |
2026-05-20
16:38:10 | 18920:
kinetis/pinirq:
Drop assert for out pin interrupts | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
15:52:41 | 3489:
nshlib/testing:
Fix open() arguments. | sim
:lua | c e i v e d % X f e r d A v e r a g e S p e e d T iDmleo a d TUipmleo a d TToitmael C uSrpreenntt
L e f t S p e e d
:-- |
2026-05-20
15:45:29 | 3489:
nshlib/testing:
Fix open() arguments. | esp32-audio-kit
:wifi | Total % Received % Xferd Average Speed Time Time Time Current |
2026-05-20
15:44:41 | 18914:
fs/vfs:
validate chmod and chown callers in inode_ | esp32s3-8048S043
:nsh | Killing pytest after timeout... |
2026-05-20
15:18:33 | 18914:
fs/vfs:
validate chmod and chown callers in inode_ | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
15:01:36 | 18908:
tricore:
Add fpu init and fpucmp support. | esp32p4-function-ev-board
:nsh | Killing pytest after timeout... |
2026-05-20
15:00:56 | 3491:
system/nxdiag:
add CMake support for NXDiag tool | esp32s3-lcd-ev
:lcd | (Same) |
2026-05-20
14:56:47 | 18914:
fs/vfs:
validate chmod and chown callers in inode_ | stm32f103-minimum
:adb | Rece |
2026-05-20
14:54:06 | 18919:
tools:
add build path support on host_info tool | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-20
14:53:47 | 18910:
arch/tricore:
Improve up_backtrace implementation | sim
:lua | R e c e i ve d % Xf e r d A v e r a g e S p e e d Ti mDe l o a dT Upload Total Spent Left Speed |
2026-05-20
14:51:14 | 18908:
tricore:
Add fpu init and fpucmp support. | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
14:47:33 | 3491:
system/nxdiag:
add CMake support for NXDiag tool | esp32p4-function-ev-board
:sdm | Killing pytest after timeout... |
2026-05-20
14:47:32 | 18919:
tools:
add build path support on host_info tool | esp32p4-function-ev-board
:qencoder | (Same) |
2026-05-20
14:39:29 | 3491:
system/nxdiag:
add CMake support for NXDiag tool | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
14:35:11 | 18920:
kinetis/pinirq:
Drop assert for out pin interrupts | sim
:lua | Curr
e n t0 |
2026-05-20
14:30:38 | 18919:
tools:
add build path support on host_info tool | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
14:11:48 | 18916:
!drivers:
separate pulse count from PWM driver | qemu-armv7a
:smp | (Same) |
2026-05-20
14:02:37 | 18916:
!drivers:
separate pulse count from PWM driver | stm32f103-minimum
:adb | % To
t a l0 % 0R e c e0i v e d 0% X f e0r d A 0v e r a g e0 S p e e d 0 -T-i:m-e- : - - T-i-m:e- - : - - T-i-m:e-- : -C-u r r e n t0 |
2026-05-20
14:00:00 | 18916:
!drivers:
separate pulse count from PWM driver | nucleo-f446re
:jumbo | 25d24
< CONFIG_EXAMPLES_PULSECOUNT=y
Saving the new configuration file |
2026-05-20
13:47:53 | 3490:
examples:
separate pulse count from PWM | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-20
13:46:53 | 3490:
examples:
separate pulse count from PWM | esp32p4-function-ev-board
:i2schar | (Same) |
2026-05-20
13:28:05 | 18902:
fs/vfs:
add parent-directory permission checks for | esp32s3-lcd-ev
:lvgl | (Same) |
2026-05-20
13:25:49 | 18907:
arm64/am62x:
add initial BeaglePlay and PocketBeag | esp32s3-lcd-ev
:lcd | (Same) |
2026-05-20
13:25:41 | 18917:
arch/stm32f0l0g0/stm32_pwm.h:
restore PWM mapping | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
13:25:23 | 3490:
examples:
separate pulse count from PWM | stm32f4discovery
:adb | D lDolaoda dU p lUopaldo a d T o tTaolt a l S pSepnetn t L eLfetf t S pSepeede
d |
2026-05-20
13:20:51 | 18908:
tricore:
Add fpu init and fpucmp support. | lckfb-szpi-esp32s3
:es7210 | % T % Total % Received % Xferd Aotverage Speed Time Time Time Current |
2026-05-20
13:20:47 | 18902:
fs/vfs:
add parent-directory permission checks for | esp32p4-function-ev-board
:bmp180 | Killing pytest after timeout... |
2026-05-20
13:18:56 | 18916:
!drivers:
separate pulse count from PWM driver | esp32s3-devkit
:wifi | ferd Average Speed Time Time Time Current |
2026-05-20
13:17:05 | 18914:
fs/vfs:
validate chmod and chown callers in inode_ | sim
:lua | T i m e T i m e C u r r e n t
D l o a d U p l o a d T o t a l DSlpoeandt U p lLoeafdt STpoeteadl
Sp
e n t0 L e0f t S0p e e d |
2026-05-20
13:15:04 | 18918:
boards:
PWM support for nucleo-c091 and nucleo-c07 | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
13:11:36 | 18907:
arm64/am62x:
add initial BeaglePlay and PocketBeag | esp32p4-function-ev-board
:psram_usrheap | Killing pytest after timeout... |
2026-05-20
13:09:10 | 3490:
examples:
separate pulse count from PWM | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
12:56:00 | 18902:
fs/vfs:
add parent-directory permission checks for | qemu-armv7a
:smp | (Same) |
2026-05-20
12:54:57 | 3490:
examples:
separate pulse count from PWM | stm32f103-minimum
:adb | DDllooaad d U pUlopaldo a d T o tTaolt a l S Sppeent n t Le f t L eSfpte e dS
pee
d |
2026-05-20
12:52:37 | 18907:
arm64/am62x:
add initial BeaglePlay and PocketBeag | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
12:45:06 | 3491:
system/nxdiag:
add CMake support for NXDiag tool | sim
:lua | Ti
m e 0 C u r r e0n t
peed Time Time Time Current |
2026-05-20
12:43:52 | 18919:
tools:
add build path support on host_info tool | sim
:lua | e T i m e Time Current
0% T o t a l0 %0 R e c e i0v e d %0 X f e r d0 Average Speed Time Time Time Current
0 Dloa d U p l0o a-d- : - -T:o-t-a l- - : -S-p:e-n-t - - : -L-e:f-t- S p e e0d |
2026-05-20
12:37:19 | 18902:
fs/vfs:
add parent-directory permission checks for | stm32f103-minimum
:adb | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of v1.46.0.zip or
v1.46.0.zip.zip, and cannot find v1.46.0.zip.ZIP, period.
make[3]: *** [Makefile:40: libuv] Error 9
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile |
2026-05-20
12:24:45 | 18916:
!drivers:
separate pulse count from PWM driver | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXffeerrdd AAvveerragaeg eS pSepeede d T iTmiem e T iTmiem e f e TrTidim me e A v CeCururarrgreeen ntSt
p
e e d T i m e T i m e T i m e C u r r DeDlnlotoa
ad d U Up pl lo oa ad d T To ot ta al l S p e n t L e f tD l oSapd e eUd
ploa |
2026-05-20
12:24:32 | 18918:
boards:
PWM support for nucleo-c091 and nucleo-c07 | stm32f103-minimum
:adb | D lDolaoda d U pUlpolaoda d T o tTaolt a lS p e nStp e n t L e f tL e fStp e eSd
peed |
2026-05-20
12:23:40 | 18907:
arm64/am62x:
add initial BeaglePlay and PocketBeag | stm32f103-minimum
:adb | t
D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnetn t L eLfetf t S pSepeede
d |
2026-05-20
11:30:07 | 18916:
!drivers:
separate pulse count from PWM driver | lckfb-szpi-esp32s3
:es7210 | T i m e T i m e D l oTaidm e U pCluorarde n t
T o t al S p e n t L e f t S p e e d
D0l o a d 0U p l o a0d T o0t a l 0 S p e n t0 L e f0t S p e e0d
--: |
2026-05-20
11:17:52 | 3490:
examples:
separate pulse count from PWM | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvveeerrraaagggeee SSSpppeeeeeeddd TTTiiimmmeee TTTiiimmmeee TTTiiimmmeee CCCuuurrrrrreeennnttt
DDDllloooaaaddd UUUpppllloooaaaddd TTTooottatalal l S pSSepneptne t n t L eLf et f Lt e S fpStep eed e
Sdp
ee
d
00 |
2026-05-20
11:17:42 | 18909:
arch/tricore:
Add up_perf function for tricore. | esp32s3-lcd-ev
:lcd | Killing pytest after timeout... |
2026-05-20
10:59:27 | 18909:
arch/tricore:
Add up_perf function for tricore. | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
10:50:35 | 18902:
fs/vfs:
add parent-directory permission checks for | sim
:lua | age
o t a l S p e n t L e f tD l oSapde e dU
ploa
d 0 T o t a l0 S p0e n t 0 Left Speed |
2026-05-20
10:48:33 | 18916:
!drivers:
separate pulse count from PWM driver | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvveeerrraaagggeee SSSpppeeeeeeddd TTTiiimmmeee TTTiiimmmeee TTTiiimmmeee CCCuuurrrrrreeennnttt
DDDllloooaaaddd UUUpppllloooaaaddd TTToootttaaalll SSSpppeeennnttt LLLeeefffttt SSSpppeeeeeeddd |
2026-05-20
10:46:49 | 18909:
arch/tricore:
Add up_perf function for tricore. | stm32f103-minimum
:adb | e n t
D l oDaldo a dU p lUopaldo a d T o tTaolt a l SpenStp e n t L ef tL e fStp e eSdp
eed |
2026-05-20
10:43:49 | 18914:
fs/vfs:
validate chmod and chown callers in inode_ | esp32p4-function-ev-board
:bmp180 | Killing pytest after timeout... |
2026-05-20
10:42:17 | 18907:
arm64/am62x:
add initial BeaglePlay and PocketBeag | sim
:lua | X f e r d A v e r a g e S p e e d T i me T iDmleo a d UTpilmoea d C u r rTeontta
l S p e n t L e f t S p e e d
0D l o a d 0 Up l o a0d T o0t a l 0 S p e n t0 L ef t 0 S p e e d
0 - |
2026-05-20
10:36:07 | 18908:
tricore:
Add fpu init and fpucmp support. | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-20
10:30:44 | 18914:
fs/vfs:
validate chmod and chown callers in inode_ | stm32f103-minimum
:adb | d A |
2026-05-20
10:20:49 | 18908:
tricore:
Add fpu init and fpucmp support. | stm32f103-minimum
:adb | n t
D l oDaldo a dU p lUopaldo a d T o tTaolt a l S p eSnpte n t L e fLte f tS p eSepde
ed |
2026-05-20
10:19:13 | 18914:
fs/vfs:
validate chmod and chown callers in inode_ | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
10:14:58 | 18908:
tricore:
Add fpu init and fpucmp support. | esp32p4-function-ev-board
:qencoder | Killing pytest after timeout... |
2026-05-20
10:07:41 | 18908:
tricore:
Add fpu init and fpucmp support. | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
10:00:10 | 18909:
arch/tricore:
Add up_perf function for tricore. | esp32s3-devkit
:fastboot_tcp | 0 % Total % Received % X fe 0 r d A verag0e Speed Tim e Time Time Current |
2026-05-20
09:23:51 | 18911:
arch/tricore:
Suspend stm when CPU stops. | esp32p4-function-ev-board
:qencoder | Killing pytest after timeout... |
2026-05-20
09:21:11 | 18909:
arch/tricore:
Add up_perf function for tricore. | lckfb-szpi-esp32s3
:es7210 | r a g e Speed Time Time Time Current |
2026-05-20
09:02:52 | 18911:
arch/tricore:
Suspend stm when CPU stops. | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
08:45:03 | 18909:
arch/tricore:
Add up_perf function for tricore. | sim
:lua | l % R e c e i v e d % X fe r d A v e r a g e S p eDeldo a d T iUmpel o a d T i mTeo t a l Spent Left Sp eTeidm
e Cu
r r e0n t |
2026-05-20
08:43:57 | 18909:
arch/tricore:
Add up_perf function for tricore. | esp32c3-devkit
:mcuboot_update_agent | l % Received % Xferd Average Speed Time Time Time Current |
2026-05-20
08:26:30 | 18914:
fs/vfs:
validate chmod and chown callers in inode_ | sim
:lua | ece |
2026-05-20
08:10:20 | 18904:
drivers/mtd/mx25rxx.c:
add support for MX25L12873G | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-20
08:07:50 | 18908:
tricore:
Add fpu init and fpucmp support. | sim
:lua | 0 D l o a d0 Up l o0a d T0o t a l 0 S p e n0t L e0f t S p e0e d-
-:--:
r rent |
2026-05-20
08:03:54 | 18907:
arm64/am62x:
add initial BeaglePlay and PocketBeag | sim
:lua | erag
e S0p e e d 0 T i m 0e T0i m e 0 T i m0e C u r r0en t
0 - - : - - : - - - - : - - : - - - - : - - : - - D l o a d0 Upload Total Spent Left Speed |
2026-05-20
07:57:02 | 18904:
drivers/mtd/mx25rxx.c:
add support for MX25L12873G | esp32p4-function-ev-board
:watchdog | Killing pytest after timeout... |
2026-05-20
07:39:07 | 18904:
drivers/mtd/mx25rxx.c:
add support for MX25L12873G | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
07:16:19 | 18911:
arch/tricore:
Suspend stm when CPU stops. | sim
:lua | T i m e C u r r e n t
D l o a d Dload U pUlpolaoda d T otal Spent Left Speed |
2026-05-20
06:51:10 | 18908:
tricore:
Add fpu init and fpucmp support. | sim
:lua | T i m e T i m e C u r r e n t
D l o a d U p l o a d T o t a l S pDelnota d ULpelfota d S p eTeodt
al
S p0e n t 0 L e f t0 S p e e0d
rent |
2026-05-20
06:44:01 | 18909:
arch/tricore:
Add up_perf function for tricore. | sim
:lua | DDlolaoda d U pUlpolaodad T otTaotla l S p Sepnte n t L e fLte f tS p eSepde
ed
C u r r e n t
D l o a d U pload Total Spent Left Speed |
2026-05-20
06:02:22 | 18908:
tricore:
Add fpu init and fpucmp support. | esp32p4-function-ev-board
:psram_usrheap | Killing pytest after timeout... |
2026-05-20
05:53:22 | 18904:
drivers/mtd/mx25rxx.c:
add support for MX25L12873G | sim
:lua | C u r0r e n t
peed |
2026-05-20
05:47:08 | 18908:
tricore:
Add fpu init and fpucmp support. | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
05:29:32 | 18908:
tricore:
Add fpu init and fpucmp support. | stm32f103-minimum
:adb | d A v e r a g e S p e e d T i m e T i m e D l o aTdi m eU p lCouardr e n tT
o t a l S p e n t L e f t S p e e d
0D l o a d 0 U p l o0a d T0o t a l 0 S pe n t0 L e f t0 S p e e d
0 -- |
2026-05-20
04:44:58 | 3489:
nshlib/testing:
Fix open() arguments. | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-20
04:34:13 | 3489:
nshlib/testing:
Fix open() arguments. | esp32p4-function-ev-board
:qencoder | (Same) |
2026-05-20
04:33:32 | 3489:
nshlib/testing:
Fix open() arguments. | stm32f4discovery
:adb | r r e n t
D l o a d UDpllooaadd UTpoltoaal d S pTenott a l L eSfpte n tS pe e d
Lef
t 0S p e e d |
2026-05-20
04:22:20 | 18908:
tricore:
Add fpu init and fpucmp support. | esp32-devkitc
:wifi | %
Total % Received % Xferd Average Speed Time Time Time Current |
2026-05-20
04:16:17 | 3489:
nshlib/testing:
Fix open() arguments. | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
03:30:43 | 18908:
tricore:
Add fpu init and fpucmp support. | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvveeerrraaagggeee SSSpppeeeeeeddd TTTiiimmmeee TTTiiimmmeee TTTiiimmmeee CCCuuurrrrrreeennnttt
DDDllloooaaaddd UUUpppllloooaaaddd TTToootttaaalll SSSpppeeennnttt % LLLTeeeoffftttta l SSS ppp eee eee%ddd
Rece
i v e000d % X f000e r d 000A v e r a g000e S p e000e d |
2026-05-20
02:49:17 | 18907:
arm64/am62x:
add initial BeaglePlay and PocketBeag | beagleplay
:ostest | 2c2,6
< # boards/arm64/am62x/beagleplay/configs/ostest/defconfig
---
> # This file is autogenerated: PLEASE DO NOT EDIT IT.
> #
> # You can use "make menuconfig" to make any modifications to the installed .config file.
> # You can then do "make savedefconfig" to generate a new defconfig file that includes your
> # modifications.
4,10d7
<
< CONFIG_ARCH="arm64"
< CONFIG_ARCH_ARM64=y
< CONFIG_ARCH_CHIP="am62x"
< CONFIG_ARCH_CHIP_AM62X=y
< CONFIG_ARCH_BOARD="be |
2026-05-20
02:48:29 | 18907:
arm64/am62x:
add initial BeaglePlay and PocketBeag | pocketbeagle2
:nsh | 2,3d1
< # boards/arm64/am62x/pocketbeagle2/configs/nsh/defconfig
< #
6,24c4,6
< # You can use "make menuconfig" to make any modifications to the installed
< # .config file. You can then do "make savedefconfig" to generate a new
< # defconfig file that includes your modifications.
< #
< # Architecture
< #
< CONFIG_ARCH="arm64"
< CONFIG_ARCH_ARM64=y
< CONFIG_ARCH_CHIP="am62x"
< CONFIG_ARCH_CHIP_AM62X=y
< CONFIG_ARCH_BOARD="pocketbeagle2"
< CONFIG_ARCH_BO |
2026-05-20
02:47:49 | 18907:
arm64/am62x:
add initial BeaglePlay and PocketBeag | sim
:lua | Dlo Xferd Average Speed Time Time Time Current
ad Upload Tot Dload Uploal Spent L ef t% TSopteaeld
%
R e0c e i v e0d % X0f e r d 0A v e r a0g e S p e0e d T i0m e T0i m-e- : - - : -T-i m-e- : -C-u:r-r-e n-t-
-:- |
2026-05-20
02:44:42 | 18907:
arm64/am62x:
add initial BeaglePlay and PocketBeag | pocketbeagle2
:ostest | 2,3d1
< # boards/arm64/am62x/pocketbeagle2/configs/ostest/defconfig
< #
6,10c4,6
< # You can use "make menuconfig" to make any modifications to the installed
< # .config file. You can then do "make savedefconfig" to generate a new
< # defconfig file that includes your modifications.
< #
< # Architecture
---
> # You can use "make menuconfig" to make any modifications to the installed .config file.
> # You can then do "make savedefconfig" to generate a new defconfig f |
2026-05-20
02:43:36 | 3489:
nshlib/testing:
Fix open() arguments. | esp32s2-saola-1
:mcuboot_update_agent | 13 |
2026-05-20
02:32:18 | 18907:
arm64/am62x:
add initial BeaglePlay and PocketBeag | pocketbeagle2
:ostest | 2,3d1
< # boards/arm64/am62x/pocketbeagle2/configs/ostest/defconfig
< #
6,10c4,6
< # You can use "make menuconfig" to make any modifications to the installed
< # .config file. You can then do "make savedefconfig" to generate a new
< # defconfig file that includes your modifications.
< #
< # Architecture
---
> # You can use "make menuconfig" to make any modifications to the installed .config file.
> # You can then do "make savedefconfig" to generate a new defconfig f |
2026-05-20
02:27:54 | 3489:
nshlib/testing:
Fix open() arguments. | sim
:lua | Dleo aSdp e eUd p l oTaidm e T o tTailm e S p e nTti m e LCeufrtr e nStp
e e d
-:-- |
2026-05-20
01:10:01 | 18880:
drivers/sensors:
Add SHTC3 temperature and humidit | esp32s3-lcd-ev
:lvgl | Killing pytest after timeout... |
2026-05-20
00:58:24 | 18880:
drivers/sensors:
Add SHTC3 temperature and humidit | esp32p4-function-ev-board
:qencoder | (Same) |
2026-05-20
00:38:23 | 18880:
drivers/sensors:
Add SHTC3 temperature and humidit | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-20
00:02:55 | 3489:
nshlib/testing:
Fix open() arguments. | esp32p4-function-ev-board
:watchdog | Killing pytest after timeout... |
2026-05-19
23:34:42 | 3489:
nshlib/testing:
Fix open() arguments. | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-19
22:52:27 | 18880:
drivers/sensors:
Add SHTC3 temperature and humidit | sim
:lua | %% %TT ootTtaoaltl a l % % RRe ec%ce eiRivveeedcd e %i% v XefXedfr edr% d AX vfAeevrreadrg aeg eAS pvSeepeerdea dg e TTiSimpmeee e d T Ti imTmeie m e T Ti immTee i m CCeuu rr rre en nt t
T
i m e C u r r e n t
D lD ol ao da d U pU lp ol ao da d T oTDtolatolaa ld S UpSpeplneotna td L TeLofettfa tl S pS epSeepdee
dn
t
0L0 e f t 0S0 p e e d 0 |
2026-05-19
22:50:52 | 18904:
drivers/mtd/mx25rxx.c:
add support for MX25L12873G | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-19
22:34:02 | 18904:
drivers/mtd/mx25rxx.c:
add support for MX25L12873G | esp32p4-function-ev-board
:psram_usrheap | (Same) |
2026-05-19
22:16:40 | 18904:
drivers/mtd/mx25rxx.c:
add support for MX25L12873G | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-19
21:32:45 | 3489:
nshlib/testing:
Fix open() arguments. | sim
:lua | % Rec
e i v0e d % Xf e0r d A v e0r a g e S0p e e d 0 T i m e0 T i m0e T0i m-e- : -C-u:r-r-e n-t-
l % Received % Xferd Average Speed Time Time Time Current |
2026-05-19
21:28:44 | 18903:
drivers/rpmsg and rptun:
some compile error fix | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-19
21:27:52 | 18903:
drivers/rpmsg and rptun:
some compile error fix | esp32p4-function-ev-board
:watchdog | (Same) |
2026-05-19
20:38:49 | 18903:
drivers/rpmsg and rptun:
some compile error fix | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-19
20:24:40 | 18902:
fs/vfs:
add parent-directory permission checks for | qemu-armv7a
:smp | (Same) |
2026-05-19
19:46:54 | 18904:
drivers/mtd/mx25rxx.c:
add support for MX25L12873G | sim
:lua | m e T im e C u rr e n t
D l o a d U p l o a d T o t a l SDploeandt Left Speed
0 - |
2026-05-19
19:38:29 | 18902:
fs/vfs:
add parent-directory permission checks for | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-19
19:20:44 | 18902:
fs/vfs:
add parent-directory permission checks for | esp32p4-function-ev-board
:watchdog | (Same) |
2026-05-19
17:52:08 | 18903:
drivers/rpmsg and rptun:
some compile error fix | sim
:lua | t
D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnetn t L eLfetf t S pSepeede
d
e n t
D l o a d U p l o a d T o t a l Spent Left Speed |
2026-05-19
17:22:05 | 18901:
arch/risc-v/espressif:
Fix CMake irq.h header orde | esp32p4-function-ev-board
:temperature_sensor | Killing pytest after timeout... |
2026-05-19
17:03:36 | 18901:
arch/risc-v/espressif:
Fix CMake irq.h header orde | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-19
16:56:31 | 18902:
fs/vfs:
add parent-directory permission checks for | sim
:lua | %%%% TTTToooottttaaaallll %%%% RRRReeeecccceeeeiiiivvvveeeedddd %%%% XXXXffffeeeerrrrdddd AAAAvvvveeeerrrraaaaggggeeee SSSSppppeeeeeeeedddd TTTTiiiimmmmeeee TTTTiiiimmmmeeee TTTTiiiimmmmeeee CCCCuuuurrrrrrrreeeennnntttt
DDDDllllooooaaaadddd UUUUppppllllooooaaaadddd TTTToooottttaaaallll SSSSppppeeeennnntttt LLLLeeeefffftttt SSSSppppeeeeeeeedddd |
2026-05-19
14:06:41 | 17229:
boards/arm/am67:
Add support for T3 Gemstone O1 bo | sim
:lua | t
D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnetn t L eLfetf t S pSepeede
d |
2026-05-19
14:03:17 | 17229:
boards/arm/am67:
Add support for T3 Gemstone O1 bo | t3-gem-o1
:nsh | 34d33
< CONFIG_NSH_ARCHINIT=y
Saving the new configuration file |
2026-05-19
14:03:13 | 18901:
arch/risc-v/espressif:
Fix CMake irq.h header orde | sim
:lvgl_fb | curl: (92) HTTP/2 stream 0 was not closed cleanly: CANCEL (err 8)
make[3]: *** [Makefile:75: v9.2.2.zip] Error 92
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/graphics/lvgl_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:471: /github/workspace/sources/apps/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-05-19
14:02:20 | 18901:
arch/risc-v/espressif:
Fix CMake irq.h header orde | sim
:lua | m e T i m e T i m e C u r r e n t
D l o a d U p l o a d T o t a l S p e n tD l o a dL e fUtp l oSapde e d
Tota
l 0 S p e n t0 L0e f t S0p e e d |
2026-05-19
13:09:51 | 3476:
apps:
drop redundant 64-bit casts on tv_sec/tv_nse | sim
:lua | D l o a d U p l o a d T o t a l S p e n t DLleofatd SUppeleoda
d T
o t a0l S p en0 t 0L e f t S0p e e d
Time Time Current |
2026-05-19
12:02:02 | 18899:
arch/tricore:
add TriCore up_backtrace() support | esp32s3-lcd-ev
:lvgl | Killing pytest after timeout... |
2026-05-19
11:47:22 | 18899:
arch/tricore:
add TriCore up_backtrace() support | esp32p4-function-ev-board
:qencoder | (Same) |
2026-05-19
11:25:28 | 18900:
git:
Specify multiple build directories in .gitign | esp32s3-lcd-ev
:lcd | (Same) |
2026-05-19
10:59:57 | 18900:
git:
Specify multiple build directories in .gitign | esp32p4-function-ev-board
:bmp180 | (Same) |
2026-05-19
08:55:38 | 17229:
boards/arm/am67:
Add support for T3 Gemstone O1 bo | sim
:lua | %% %TT ooTttoaatlla l %% %RR eeRcceeeciievvieevdde d%% %XX ffXeefrreddr d AA vvAeevrreaaggree a SSgppeeee edSd p e e TdTi im me e T i m e T Ti im me e T i m e T Ti im me e T i CmCueur rr reCenuntrt
r
e n t
D Dl lo oa adDd l o UaUpdpl lo oaUadpd l o a TdTo ot ta alTl o t a SlSp pe en ntSt p e n t L Le ef ft t L e SfSptpe ee edSd
p
eed
00 |
2026-05-19
08:49:49 | 17229:
boards/arm/am67:
Add support for T3 Gemstone O1 bo | t3-gem-o1
:nsh | 34d33
< CONFIG_NSH_ARCHINIT=y
Saving the new configuration file |
2026-05-19
08:40:54 | 18900:
git:
Specify multiple build directories in .gitign | sim
:lua | XTfiem
re d 0 A v eT ri am0ge e SC pu0er er de n t
0T i m e 0 T i m 0e T 0i m e C u0 r r- e- n: t-
- : - -D l -o -a :d - - :U -p -l o -a -d : - - :T -o -t a l 0S p e n t D l oLaedf t U plSopaed e d
Total Spent Left Speed |
2026-05-19
07:09:03 | 18898:
arch/arm:
fix infinite loop in test and clean cach | gd32f470zk-eval
:fmclfsnsh | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[1]: *** [littlefs/Make.defs:68: .littlefsunpack] Error 2
make[1]: Target 'context' not remade because of errors.
make: *** [tools/Unix.mk:471: fs/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-05-19
06:37:28 | 18899:
arch/tricore:
add TriCore up_backtrace() support | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvveeerrraaagggeee SSSpppeeeeeeddd TTTiiimmmeee TTTiiimmmeee TTTiiimmmeee CCCuuurrrrrreeennnttt
DDDllloooaaaddd UUUpppllloooaaaddd TTToootttaaalll SSSpppeeennnttt LLLeeefffttt SSSpppeeeeeeddd |
2026-05-19
06:26:40 | 18898:
arch/arm:
fix infinite loop in test and clean cach | stm32f103-minimum
:adb | e n t
D l o a d DUlpolaoda d U p lTooatda l T oStpaeln t S p eLnetft S pLeeefdt
Sp
e e d0 |
2026-05-19
05:26:51 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | esp32s3-lcd-ev
:lvgl | Killing pytest after timeout... |
2026-05-19
04:42:21 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-19
01:47:37 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | sim
:lua | eed
T0i m e 0 T i m e0 T0i m e 0C u r r e n0t |
2026-05-18
22:52:25 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32c3-devkit
:pwm | pwm_main.c: In function 'pwm_main':
##[error]pwm_main.c:537:7: error: 'struct pwm_info_s' has no member named 'duty'
537 | info.duty = g_pwmstate.duty ? \
| ^
##[error]pwm_main.c:550:40: error: 'struct pwm_info_s' has no member named 'duty'
550 | info.frequency, (uint32_t)info.duty);
| ^
make[2]: *** [/github/workspace/sources/apps/Application.mk:330: pwm_main.c.github.workspace.sources.apps.examples.pwm.o] Error 1
make[2]: Tar |
2026-05-18
22:38:33 | 3474:
system/nxpkg:
add a basic package lifecycle helper | bl602evb
:timer | (Same) |
2026-05-18
22:37:15 | 3474:
system/nxpkg:
add a basic package lifecycle helper | at32f437-mini
:pwm | (Same) |
2026-05-18
22:36:56 | 3474:
system/nxpkg:
add a basic package lifecycle helper | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAvveerraaggee SSppeeeedd TTiimmee A vTTeiirmmaeeg e S p eTTeiidme Current
T i m e T iDmleoa d U pTliomaed C uTrorteanlt
S p e n t L e f t S p e ed
--:
Dloa d % Total % Received % Xferd Average Speed Time Time Time Current |
2026-05-18
19:45:45 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | sim
:lua | e
T i m e C u r r e n t
D Dl lo oa ad d U Up pl lo oa ad d T To ot taDalll o a d S Sp peUenpntlt o a d L Le efTftot t a SlSp pe ee edSd
p
ent |
2026-05-18
19:41:57 | 18897:
drivers/video/vnc:
fix typo in Kconfig | stm32f4discovery
:adb | d |
2026-05-18
19:27:00 | 18897:
drivers/video/vnc:
fix typo in Kconfig | stm32f103-minimum
:adb | D l oa d D lUopaldo a dU pl o aTd o tal T oStpaeln t S p eLnetf t SLpeefedt
Sp
ee d |
2026-05-18
18:58:54 | 18896:
arch/risc-v/espressif:
Add touch sensor support fo | esp32c3-legacy-devkit
:pwm | ##[error]pwm_main.c:51:5: error: "CONFIG_PWM_NCHANNELS" is not defined, evaluates to 0 [-Werror=undef]
51 | #if CONFIG_PWM_NCHANNELS > 1
| ^~~~~~~~~~~~~~~~~~~~
##[error]pwm_main.c:56:5: error: "CONFIG_PWM_NCHANNELS" is not defined, evaluates to 0 [-Werror=undef]
56 | #if CONFIG_PWM_NCHANNELS > 2
| ^~~~~~~~~~~~~~~~~~~~
##[error]pwm_main.c:62:5: error: "CONFIG_PWM_NCHANNELS" is not defined, evaluates to 0 [-Werror=undef]
62 | #if CONFIG_PWM_NCHANNELS > 3
| ^~~~~~~~~~~ |
2026-05-18
18:48:29 | 18896:
arch/risc-v/espressif:
Add touch sensor support fo | esp32c6-devkitm
:pwm | (Same) |
2026-05-18
18:35:30 | 18897:
drivers/video/vnc:
fix typo in Kconfig | esp32s3-8048S043
:nsh | Killing pytest after timeout... |
2026-05-18
18:33:27 | 18897:
drivers/video/vnc:
fix typo in Kconfig | esp32p4-function-ev-board
:qencoder | (Same) |
2026-05-18
18:32:00 | 18896:
arch/risc-v/espressif:
Add touch sensor support fo | esp32-c3-zero
:usbnsh | [1/1309] Building C object mm/CMakeFiles/mm.dir/map/mm_map.c.o
[2/1309] Building C object mm/CMakeFiles/mm.dir/kasan/hook.c.o
[3/1309] Building C object mm/CMakeFiles/mm.dir/mempool/mempool_procfs.c.o
[4/1309] Building C object mm/CMakeFiles/mm.dir/mm_heap/mm_initialize.c.o
[5/1309] Building C object mm/CMakeFiles/mm.dir/mm_heap/mm_lock.c.o
[6/1309] Building C object arch/CMakeFiles/arch.dir/risc-v/src/common/espressif/esp-hal-3rdparty/components/efuse/src/esp_efuse_fields.c.o
[7/1309] Bui |
2026-05-18
18:19:34 | 18896:
arch/risc-v/espressif:
Add touch sensor support fo | esp32c3-devkit
:pwm | ##[error]pwm_main.c:51:5: error: "CONFIG_PWM_NCHANNELS" is not defined, evaluates to 0 [-Werror=undef]
51 | #if CONFIG_PWM_NCHANNELS > 1
| ^~~~~~~~~~~~~~~~~~~~
##[error]pwm_main.c:56:5: error: "CONFIG_PWM_NCHANNELS" is not defined, evaluates to 0 [-Werror=undef]
56 | #if CONFIG_PWM_NCHANNELS > 2
| ^~~~~~~~~~~~~~~~~~~~
##[error]pwm_main.c:62:5: error: "CONFIG_PWM_NCHANNELS" is not defined, evaluates to 0 [-Werror=undef]
62 | #if CONFIG_PWM_NCHANNELS > 3
| ^~~~~~~~~~~ |
2026-05-18
18:18:33 | 18896:
arch/risc-v/espressif:
Add touch sensor support fo | esp32c6-devkitc
:pwm | (Same) |
2026-05-18
16:51:47 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | lm3s6432-s2e
:nsh | netlib_getiobinfo.c: In function 'netlib_get_iobinfo':
##[error]netlib_getiobinfo.c:80:15: error: passing argument 1 of 'fprintf' makes pointer from integer without a cast [-Werror=int-conversion]
80 | fprintf(stderr, "ERROR: Failed to open path:%s
", PROCFS_IOB_PATH);
| ^~~~~~
| |
| int
In file included from /github/workspace/sources/apps/include/netutils/netlib.h:50,
from netlib_getiobinfo.c:38:
151 | int fprintf(FAR FILE *stre |
2026-05-18
16:08:23 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | stm32f4discovery
:adb | al
%0 R e c e i0v e d %0 X f e r d0 A v e0r a g e S0p e e d 0T i m e 0 T-i-m:e- - : - - T-i-m:e- - :C-u-r r-e-n:t- |
2026-05-18
15:57:29 | 3488:
wakaama:
add support for TLV | esp32s3-lcd-ev
:lcd | Killing pytest after timeout... |
2026-05-18
15:57:17 | 18897:
drivers/video/vnc:
fix typo in Kconfig | sim
:lua | T i m e C u rrent
d %
X f e0r d A v e0r a g e 0S p e e d 0 T i m0e T0i m e 0 T i m e 0C u-r-r:e-n-t: |
2026-05-18
15:56:41 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | esp32p4-function-ev-board
:bmp180 | Killing pytest after timeout... |
2026-05-18
15:54:08 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | esp32s3-lcd-ev
:lcd | (Same) |
2026-05-18
15:53:41 | 3488:
wakaama:
add support for TLV | stm32f103-minimum
:adb | T i m e T i m e C u r r e n t
D l oad Upload To t a l S p e n t L e fDtlo a dS p eUepldo
ad
T o0t al S0pe n t 0 L e f t0 S p e0e d |
2026-05-18
15:36:57 | 3488:
wakaama:
add support for TLV | esp32p4-function-ev-board
:qencoder | Killing pytest after timeout... |
2026-05-18
15:03:20 | 18896:
arch/risc-v/espressif:
Add touch sensor support fo | esp32p4-function-ev-board
:nsh | (Same) |
2026-05-18
15:01:56 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-18
14:01:25 | 3488:
wakaama:
add support for TLV | lckfb-szpi-esp32s3
:es7210 | urre
nt
:-- |
2026-05-18
13:42:49 | 18893:
arch/risc-v/espressif:
Add LPSPI and SPI3 support | esp32s3-lcd-ev
:lcd | Killing pytest after timeout... |
2026-05-18
13:25:11 | 17229:
boards/arm/am67:
Add support for T3 Gemstone O1 bo | t3-gem-o1
:nsh | am67_appinit.c: In function 'board_app_initialize':
##[error]am67_appinit.c:66:10: error: 'OK' undeclared (first use in this function)
66 | return OK;
| ^~
am67_appinit.c:66:10: note: each undeclared identifier is reported only once for each function it appears in
##[error]am67_appinit.c:72:1: error: control reaches end of non-void function [-Werror=return-type]
72 | }
| ^
cc1: all warnings being treated as errors
make[2]: *** [/github/workspace/sources/nuttx/boards/Boa |
2026-05-18
13:21:48 | 3474:
system/nxpkg:
add a basic package lifecycle helper | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvveeerrraaagggeee SSSpppeeeeeeddd TTTiiimmmeee TTTiiimmmeee TTTiiimmmeee CCCuuurrrrrreeennnttt
DDDllloooaaaddd UUUpppllloooaaaddd TTToootttaaalll SSSpppeeennnttt LLLeeefffttt SSSpppeeeeeeddd |
2026-05-18
13:20:33 | 17229:
boards/arm/am67:
Add support for T3 Gemstone O1 bo | sim
:lua | % Re%c eTiovted % Xferd Average Speed Time Time Tiamle C u%r reRnetc
e i v e d % X f e r d A v e r a g e S p e e d T i mDel oa d Upload Total Spent Left Speed |
2026-05-18
13:06:58 | 3488:
wakaama:
add support for TLV | sim
:lua | %%% TTToootttaaalll % % % R ReRecececeieiviveveded d % % % X XffXeefrreddr d AA vvAeevrreaarggaeeg eSS ppSeepeeedde d TT iiTmmieem e TT iiTmmieem e TT iimTei m eC u rCruernrte
n t
m e C u r r De lnDotla
od a d U p Ul po la od a d T o Tt oa tl a l S p Se pn et n t L e fL teD fl toS ap deSe pd e
Uepdl
o
a d
0 T 0o t a l0 0 S p0 e n 0t 0 L 0e f t0 0 S p e e0 d |
2026-05-18
12:59:53 | 17229:
boards/arm/am67:
Add support for T3 Gemstone O1 bo | qemu-armv8a
:nsh_smp | + '[' -d '' ']' |
2026-05-18
10:45:22 | 3487:
interpreters/python:
Enable using `pip` to install | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-18
10:43:38 | 18893:
arch/risc-v/espressif:
Add LPSPI and SPI3 support | sim
:lua | tal % Received % Xferd Average Speed Time Time Time Current
Dloa d Upload Total Spent Left Speed
T i m0e 0T i m e 0 C u r r 0e n t |
2026-05-18
10:09:48 | 3487:
interpreters/python:
Enable using `pip` to install | esp32p4-function-ev-board
:i2schar | Killing pytest after timeout... |
2026-05-18
09:58:11 | 3487:
interpreters/python:
Enable using `pip` to install | stm32f103-minimum
:adb | DDllooaadd U pUlpolaoda d T oTtaolt a l S pe nStp e n tL e f t L e ftS p Sepeed
e
d |
2026-05-18
09:17:23 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-18
09:12:42 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | esp32p4-function-ev-board
:watchdog | (Same) |
2026-05-18
09:06:08 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | lm3s6432-s2e
:nsh | /tools/gcc-arm-none-eabi/bin/../lib/gcc/arm-none-eabi/13.2.1/../../../../arm-none-eabi/bin/ld: /github/workspace/sources/nuttx/nuttx section `.data' will not fit in region `flash'
/tools/gcc-arm-none-eabi/bin/../lib/gcc/arm-none-eabi/13.2.1/../../../../arm-none-eabi/bin/ld: region `flash' overflowed by 1112 bytes
collect2: error: ld returned 1 exit status
make[1]: *** [Makefile:226: nuttx] Error 1
make: *** [tools/Unix.mk:568: nuttx] Error 2
make: Target 'all' not remade because of errors.
|
2026-05-18
09:04:45 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | stm32f103-minimum
:adb | n t
D l oa dD l oUapdl o aUdp l o aTdo t a lT o t aSlp e n tS p e n tL e f t L eSfpte e Speed |
2026-05-18
08:55:47 | 17229:
boards/arm/am67:
Add support for T3 Gemstone O1 bo | sim
:lua | ferd
A0v e r a g e0 S p e e0d T i0m e 0 T i m e 0 T i m0e C u r r0e n-t- |
2026-05-18
08:55:15 | 17229:
boards/arm/am67:
Add support for T3 Gemstone O1 bo | t3-gem-o1
:nsh | am67_appinit.c: In function 'board_app_initialize':
##[error]am67_appinit.c:66:10: error: 'OK' undeclared (first use in this function)
66 | return OK;
| ^~
am67_appinit.c:66:10: note: each undeclared identifier is reported only once for each function it appears in
##[error]am67_appinit.c:72:1: error: control reaches end of non-void function [-Werror=return-type]
72 | }
| ^
cc1: all warnings being treated as errors
make[2]: *** [/github/workspace/sources/nuttx/boards/Boa |
2026-05-18
08:30:26 | 18863:
tools:
Update note about first line of a block | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-18
08:23:27 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | esp32s3-lcd-ev
:audio | (Same) |
2026-05-18
08:16:00 | 3477:
audioutils:
Add RTTTL parsing library | sim
:lua | % T o t%a lT o t a l% R e c%e iRveecde i%v eXdf e% Xferd Average Speed Time Time Time Current |
2026-05-18
08:09:12 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | esp32p4-function-ev-board
:sdm | Killing pytest after timeout... |
2026-05-18
07:58:59 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-18
07:51:15 | 3487:
interpreters/python:
Enable using `pip` to install | sim
:lua | t
D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnetn t L eLfetf t S pSepeede
d |
2026-05-18
07:28:03 | 3486:
fix:
the nuttx shell (nsh) has no authentication m | sabre-6quad
:citest | Traceback (most recent call last):
File "/usr/local/bin/ntfc", line 6, in
sys.exit(main())
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 1485, in __call__
return self.main(*args, **kwargs)
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 1416, in main
ctx.exit()
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 737, in exit
self.close()
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 621, |
2026-05-18
07:27:21 | 3486:
fix:
the nuttx shell (nsh) has no authentication m | qemu-intel64
:knsh_romfs | nsh_login.c: In function 'nsh_login':
##[warning]nsh_login.c:176:13: warning: implicit declaration of function 'readline_fd' [-Wimplicit-function-declaration]
176 | ret = readline_fd(pstate->cn_line, LINE_MAX,
| ^~~~~~~~~~~ |
2026-05-18
07:27:20 | 3486:
fix:
the nuttx shell (nsh) has no authentication m | pnev5180b
:usbnsh | nsh_login.c: In function 'nsh_login':
##[error]nsh_login.c:176:13: error: implicit declaration of function 'readline_fd' [-Werror=implicit-function-declaration]
176 | ret = readline_fd(pstate->cn_line, LINE_MAX,
| ^~~~~~~~~~~
cc1: all warnings being treated as errors
make[2]: *** [/github/workspace/sources/apps/Application.mk:239: nsh_login.c.github.workspace.sources.apps.nshlib.o] Error 1
make[2]: Target 'all' not remade because of errors.
make[1]: *** [Makefile:54: / |
2026-05-18
07:26:49 | 3486:
fix:
the nuttx shell (nsh) has no authentication m | pnev5180b
:usbnsh-cdcecm | (Same) |
2026-05-18
07:26:40 | 3486:
fix:
the nuttx shell (nsh) has no authentication m | qemu-intel64
:nsh | (Same) |
2026-05-18
07:26:01 | 3486:
fix:
the nuttx shell (nsh) has no authentication m | qemu-intel64
:fb | (Same) |
2026-05-18
07:25:49 | 3486:
fix:
the nuttx shell (nsh) has no authentication m | pnev5180b
:knsh | (Same) |
2026-05-18
07:25:21 | 3486:
fix:
the nuttx shell (nsh) has no authentication m | pnev5180b
:nsh | (Same) |
2026-05-18
07:24:58 | 3486:
fix:
the nuttx shell (nsh) has no authentication m | pnev5180b
:nsh-cdcecm | (Same) |
2026-05-18
07:24:17 | 3486:
fix:
the nuttx shell (nsh) has no authentication m | sim
:bastest | 46d45
< CONFIG_NSH_CONSOLE_LOGIN=y
Saving the new configuration file |
2026-05-18
07:23:53 | 3486:
fix:
the nuttx shell (nsh) has no authentication m | qemu-intel64
:lvgl | nsh_login.c: In function 'nsh_login':
##[error]nsh_login.c:176:13: error: implicit declaration of function 'readline_fd' [-Werror=implicit-function-declaration]
176 | ret = readline_fd(pstate->cn_line, LINE_MAX,
| ^~~~~~~~~~~
cc1: all warnings being treated as errors
make[2]: *** [/github/workspace/sources/apps/Application.mk:239: nsh_login.c.github.workspace.sources.apps.nshlib.o] Error 1
make[2]: Target 'all' not remade because of errors.
make[1]: *** [Makefile:54: / |
2026-05-18
07:23:03 | 3486:
fix:
the nuttx shell (nsh) has no authentication m | sim
:duktape | 42d41
< CONFIG_NSH_CONSOLE_LOGIN=y
Saving the new configuration file |
2026-05-18
07:22:36 | 3486:
fix:
the nuttx shell (nsh) has no authentication m | sim
:crypto | nsh_login.c: In function 'nsh_login':
##[error]nsh_login.c:176:13: error: implicit declaration of function 'readline_fd' [-Werror=implicit-function-declaration]
176 | ret = readline_fd(pstate->cn_line, LINE_MAX,
| ^~~~~~~~~~~
cc1: all warnings being treated as errors
make[2]: *** [/github/workspace/sources/apps/Application.mk:239: nsh_login.c.github.workspace.sources.apps.nshlib.o] Error 1
make[2]: Target 'all' not remade because of errors.
make[1]: *** [Makefile:54: / |
2026-05-18
07:22:33 | 17229:
boards/arm/am67:
Add support for T3 Gemstone O1 bo | t3-gem-o1
:nsh | am67_appinit.c: In function 'board_app_initialize':
##[error]am67_appinit.c:66:10: error: 'OK' undeclared (first use in this function)
66 | return OK;
| ^~
am67_appinit.c:66:10: note: each undeclared identifier is reported only once for each function it appears in
##[error]am67_appinit.c:72:1: error: control reaches end of non-void function [-Werror=return-type]
72 | }
| ^
cc1: all warnings being treated as errors
make[2]: *** [/github/workspace/sources/nuttx/boards/Boa |
2026-05-18
07:22:22 | 3486:
fix:
the nuttx shell (nsh) has no authentication m | qemu-intel64
:nsh_pci | nsh_login.c: In function 'nsh_login':
##[error]nsh_login.c:176:13: error: implicit declaration of function 'readline_fd' [-Werror=implicit-function-declaration]
176 | ret = readline_fd(pstate->cn_line, LINE_MAX,
| ^~~~~~~~~~~
cc1: all warnings being treated as errors
make[2]: *** [/github/workspace/sources/apps/Application.mk:239: nsh_login.c.github.workspace.sources.apps.nshlib.o] Error 1
make[2]: Target 'all' not remade because of errors.
make[1]: *** [Makefile:54: / |
2026-05-18
07:21:58 | 3486:
fix:
the nuttx shell (nsh) has no authentication m | qemu-intel64
:nsh_pci_smp | (Same) |
2026-05-18
07:20:51 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | lckfb-szpi-esp32s3
:es7210 | e T i m e T i m e C u r r e n t
D l o a d U p l o a d T o t a l S p e nDtload Upload Total Spent LLeefftt SSppeeeedd |
2026-05-18
07:16:47 | 3486:
fix:
the nuttx shell (nsh) has no authentication m | qemu-intel64
:knsh_romfs_pci | nsh_login.c: In function 'nsh_login':
##[warning]nsh_login.c:176:13: warning: implicit declaration of function 'readline_fd' [-Wimplicit-function-declaration]
176 | ret = readline_fd(pstate->cn_line, LINE_MAX,
| ^~~~~~~~~~~ |
2026-05-18
07:16:05 | 3486:
fix:
the nuttx shell (nsh) has no authentication m | sim
:adb | 42d41
< CONFIG_NSH_CONSOLE_LOGIN=y
Saving the new configuration file |
2026-05-18
07:11:43 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | esp32s2-saola-1
:mcuboot_update_agent | 1M |
2026-05-18
06:56:31 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:lua | e T i m e C u r r e n t
D l o ad Up l o ad T o ta l S p en t L e fDload Upload t Speed |
2026-05-18
05:48:23 | 18863:
tools:
Update note about first line of a block | sim
:lua | % % Total % Received % Xferd Average Speed Time Time Time Current
ved
% X0f e r d 0A v e r a0g e S p0e e d 0 T i m e 0 T i m e0 T i0m e- - :C-u-r:r-e-n t-
T i m e T i m e T i m e C u r Dload Uplorent |
2026-05-18
04:20:22 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-18
04:19:20 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | nucleo-g431rb
:nsh | (Unknown) |
2026-05-18
04:14:05 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | nucleo-g431kb
:nsh | (Same) |
2026-05-18
04:00:56 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | esp32-lyrat
:wifi | Received % Xferd Average Speed Time Time Time Current |
2026-05-18
03:55:05 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | b-g431b-esc1
:nsh | 22d21
< CONFIG_ARM_TOOLCHAIN_CLANG=y
Saving the new configuration file |
2026-05-18
02:32:28 | 18892:
arch/arm/stm32n6:
Add STM32N6 chip and Nucleo-N657 | esp32p4-function-ev-board
:watchdog | Killing pytest after timeout... |
2026-05-18
02:27:16 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | sim
:lua | % %T oTtoatla l % %R ecReeicveeidv e%d X%f eXrferd Average Speed Time Time Time Current |
2026-05-18
02:06:06 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | sim
:lua | T i m e C u r r e n t
D l o a d U p l o a d Dload Up l oTaodt a l T o tSaple n t S p eLnetf t SLpeefetd
Speed |
2026-05-18
02:02:00 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | sabre-6quad
:netnsh | D l o a d U p l oDaldo a d T oUtpallo a d S p eTnott a l L eSfpte n tS p e e dL
eft
S p e0e d |
2026-05-18
02:01:43 | 18892:
arch/arm/stm32n6:
Add STM32N6 chip and Nucleo-N657 | stm32f103-minimum
:adb | i m e T i m e C u r r e n t
D l o a d U p l o a d T o t a l D l oSapde n tU p l o aLdef t TSopteaeld
Sp
e n t0 L e0f t S0p e e d |
2026-05-17
22:08:58 | 18892:
arch/arm/stm32n6:
Add STM32N6 chip and Nucleo-N657 | esp32s3-lcd-ev
:lcd | Killing pytest after timeout... |
2026-05-17
21:50:23 | 3485:
boot/mcuboot:
Update commit version | esp32s3-lcd-ev
:audio | (Same) |
2026-05-17
21:37:23 | 3485:
boot/mcuboot:
Update commit version | esp32p4-function-ev-board
:watchdog | (Same) |
2026-05-17
21:23:19 | 18892:
arch/arm/stm32n6:
Add STM32N6 chip and Nucleo-N657 | stm32f103-minimum
:adb | DDllooaadd UUppllooaadd T oTtoatl a l S p eSnpetn t L e f tL e fStp e eSdp
eed |
2026-05-17
21:07:10 | 3485:
boot/mcuboot:
Update commit version | stm32f103-minimum
:adb | t
D l oDaldo a dU p lUoapdl o a dTo t a lT o t alS p e ntS p e n tL e f t L eSfpte e d
Spe
e d |
2026-05-17
19:53:21 | 3485:
boot/mcuboot:
Update commit version | lckfb-szpi-esp32s3
:es7210 | % Tot % Total % Received % Xferd Average Speal % Received % Xferd Average Speed Time Time Time Current
e d T i m e T i m e T iDmleo a dC u rUrpelnota
d T o t a l S p e n t L e f t S p eed |
2026-05-17
19:50:35 | 18892:
arch/arm/stm32n6:
Add STM32N6 chip and Nucleo-N657 | sim
:lua | r r e n t
D l o a d DUlpolaoda d U p lTooatda l T oStpaeln t S p eLnetf t SLpeefetd
Speed
ver |
2026-05-17
19:31:05 | 3485:
boot/mcuboot:
Update commit version | sim
:lua | % % TotaTl % Received % Xferd Average Speed Time Time Time Current
D l oa d U p l o a d T o t a l D lo aSpde nt Left Speed
0 U p l0o a d 0 T o t0a l S0p e n t 0 L e f t 0 S p e e d0
--: |
2026-05-17
15:53:43 | 18891:
fs/vfs:
enforce pseudoFS permissions on open() | esp32s3-lcd-ev
:buttons | Killing pytest after timeout... |
2026-05-17
15:43:56 | 18891:
fs/vfs:
enforce pseudoFS permissions on open() | esp32p4-function-ev-board
:sdm | (Same) |
2026-05-17
15:43:05 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-17
15:37:32 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | nucleo-g431rb
:nsh | (Unknown) |
2026-05-17
15:34:01 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | stm32f103-minimum
:adb | T i m e C u r r e n t
D l o a d U p l o a d D lTooatda l U p lSopaedn t T o tLeaflt SSppeeendt
L
e f t0 S p e e d0 |
2026-05-17
15:32:13 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | nucleo-g431kb
:nsh | (Unknown) |
2026-05-17
15:04:34 | 18883:
sim/posix:
Add APPLE to a build target for sim's c | esp32s3-lcd-ev
:lvgl | Killing pytest after timeout... |
2026-05-17
14:52:21 | 18883:
sim/posix:
Add APPLE to a build target for sim's c | esp32p4-function-ev-board
:motor | (Same) |
2026-05-17
14:29:01 | 18891:
fs/vfs:
enforce pseudoFS permissions on open() | gd32f470zk-eval
:fmclfsnsh | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[1]: *** [littlefs/Make.defs:68: .littlefsunpack] Error 2
make[1]: Target 'context' not remade because of errors.
make: *** [tools/Unix.mk:470: fs/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-05-17
14:21:22 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | lckfb-szpi-esp32s3
:es7210 | d Total
0S pe n t 0 L e f0t S p e0e d |
2026-05-17
14:02:51 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | sim
:lua | m e T i m e D l o a dT i mUep load Total Spent Left Speed |
2026-05-17
13:38:07 | 18891:
fs/vfs:
enforce pseudoFS permissions on open() | sim
:lua | eed Time Time T im e Time Curren t
Curr
en t |
2026-05-17
12:46:48 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-17
12:43:25 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | nucleo-g431rb
:nsh | (Unknown) |
2026-05-17
12:39:06 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | stm32f103-minimum
:adb | m e T i m e T i m e C u r r e n t
D l o a d U p l o a d T o t a l S p e nt D l oLaedf t U pSlpoeaedd
To
t a l0 S p e0n t 0 L e f t 0 S p e e0d |
2026-05-17
12:38:15 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | nucleo-g431kb
:nsh | (Unknown) |
2026-05-17
12:23:32 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | b-g431b-esc1
:nsh | arm-none-eabi-ld: /github/workspace/sources/nuttx/nuttx section `.data' will not fit in region `flash'
arm-none-eabi-ld: region `flash' overflowed by 296 bytes
make[1]: *** [Makefile:226: nuttx] Error 1
make: *** [tools/Unix.mk:568: nuttx] Error 2
make: Target 'all' not remade because of errors.
Untracked files:
boards/arm/stm32/b-g431b-esc1/scripts/ld.script.tmp
nothing added to commit but untracked files present (use "git add" to track) |
2026-05-17
11:30:56 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | lckfb-szpi-esp32s3
:fastboot | Xferd Average Speed Time Time Time Current |
2026-05-17
08:14:41 | 3484:
apps/cmake:
Add DEPENDS for Rust-related files. | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-17
08:07:33 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-17
07:55:47 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | stm32f103-minimum
:adb | t
D lDolaoda d U pUlpolaoda d T oTtoatla l S pSepnetn t L eLfetft SSppeeeedd |
2026-05-17
07:53:58 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | nucleo-g431rb
:nsh | (Unknown) |
2026-05-17
07:49:13 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | nucleo-g431kb
:nsh | (Same) |
2026-05-17
07:11:48 | 18884:
fs/mnemofs:
Add mnemofs version 1 support. | esp32s3-lcd-ev
:lvgl | Killing pytest after timeout... |
2026-05-17
07:00:15 | 18884:
fs/mnemofs:
Add mnemofs version 1 support. | esp32p4-function-ev-board
:watchdog | (Same) |
2026-05-17
06:21:41 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | sim
:lua | % % Total %% TRoetceailv e d %% RXefcerd Aveeraigvee dS p%e eXdf e r Tdi m eA v e r aTgiem eS p e e d T iTmei m eC u r rTenitme
Time Current
100 |
2026-05-17
06:19:56 | 3484:
apps/cmake:
Add DEPENDS for Rust-related files. | sim
:rpproxy_uart | End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of open-amp.zip or
open-amp.zip.zip, and cannot find open-amp.zip.ZIP, period.
make[1]: *** [open-amp.defs:67: open-amp.zip] Error 9
make[1]: Target 'context' not remade because of errors.
make: * |
2026-05-17
05:57:36 | 3484:
apps/cmake:
Add DEPENDS for Rust-related files. | sim
:lua | i v e d % X f e r d A v e r a g e S pe e d T i m e D l oTaidm e U p l o aTdi m e TCoutrarle n t
S p e n t L e f t S p e e d |
2026-05-17
05:54:31 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-17
05:40:39 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | nucleo-g431rb
:nsh | (Unknown) |
2026-05-17
05:35:42 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | nucleo-g431kb
:nsh | (Same) |
2026-05-17
05:24:39 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | b-g431b-esc1
:nsh | arm-none-eabi-ld: /github/workspace/sources/nuttx/nuttx section `.data' will not fit in region `flash'
arm-none-eabi-ld: region `flash' overflowed by 248 bytes
make[1]: *** [Makefile:226: nuttx] Error 1
make: *** [tools/Unix.mk:568: nuttx] Error 2
make: Target 'all' not remade because of errors.
Untracked files:
boards/arm/stm32/b-g431b-esc1/scripts/ld.script.tmp
nothing added to commit but untracked files present (use "git add" to track) |
2026-05-17
04:54:20 | 18884:
fs/mnemofs:
Add mnemofs version 1 support. | sim
:lua | DDllooaadd UUppllooaadd TTootatla l S pSepnetn t L eLfetf t S pSepeede
d |
2026-05-17
04:43:44 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | lckfb-szpi-esp32s3
:adb | 0 % Total % Received % Xferd Average Speed Time Time Time Current |
2026-05-17
04:28:28 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | lckfb-szpi-esp32s3
:es7210 | e f t S p e e d |
2026-05-17
04:07:29 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | sim
:lua | d A
v e r0a g e S p0e e d 0 T i m e 0 T i m0e 0T i m e C0u r r e n t0 |
2026-05-17
04:06:20 | 18891:
fs/vfs:
enforce pseudoFS permissions on open() | esp32s3-lcd-ev
:audio | Killing pytest after timeout... |
2026-05-17
03:56:06 | 18891:
fs/vfs:
enforce pseudoFS permissions on open() | esp32p4-function-ev-board
:qencoder | (Same) |
2026-05-17
03:25:33 | 18891:
fs/vfs:
enforce pseudoFS permissions on open() | stm32f103-minimum
:adb | D l oDaldo a dU p lUopaldo a d T o tTaolt a l S p eSnpt e n t L e f tL e fStp e edS
peed |
2026-05-17
02:38:19 | 3480:
nshlib:
add chmod and chown builtins | esp32s3-lcd-ev
:lvgl | Killing pytest after timeout... |
2026-05-17
02:25:48 | 3480:
nshlib:
add chmod and chown builtins | esp32p4-function-ev-board
:qencoder | (Same) |
2026-05-17
02:25:41 | 18891:
fs/vfs:
enforce pseudoFS permissions on open() | esp32-devkitc
:wifi_smp | gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
make[3]: *** [Makefile:76: argtable3] Error 2
make[3]: Target 'context' not remade because of errors.
make[2]: *** [Makefile:57: /github/workspace/sources/apps/system/argtable3_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:187: context] Error 2
make: *** [tools/Unix.mk:470: /github/workspace/sources/apps/.context] Error 2
mak |
2026-05-17
01:44:04 | 3480:
nshlib:
add chmod and chown builtins | stm32f103-minimum
:adb | n t |
2026-05-17
00:54:18 | 3480:
nshlib:
add chmod and chown builtins | lckfb-szpi-esp32s3
:camera | urrent |
2026-05-17
00:21:13 | 3480:
nshlib:
add chmod and chown builtins | sim
:lua | ed |
2026-05-16
22:49:55 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32s3-lcd-ev
:lvgl | Killing pytest after timeout... |
2026-05-16
22:38:15 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32p4-function-ev-board
:i2schar | (Same) |
2026-05-16
22:07:17 | 3474:
system/nxpkg:
add a basic package lifecycle helper | esp32-lyrat
:audio | Time Time Current |
2026-05-16
20:33:53 | 18890:
ci/platform:
Fix the “Repository not found” er | esp32s3-lcd-ev
:lvgl | Killing pytest after timeout... |
2026-05-16
20:33:39 | 3474:
system/nxpkg:
add a basic package lifecycle helper | sim
:lua | m % Total % Received % Xferd Average Speed Time DTilmoea d Up lToiamde CTuorrteanlt
S p e n t Left Speed
U p l o a d T o t a l S p e n t Left Speed |
2026-05-16
20:20:07 | 18890:
ci/platform:
Fix the “Repository not found” er | esp32p4-function-ev-board
:psram_usrheap | Killing pytest after timeout... |
2026-05-16
19:49:57 | 18890:
ci/platform:
Fix the “Repository not found” er | stm32f103-minimum
:adb | Rece
i v e0d % X f0e r d 0A v e r a g0e S p e0e d T0im e T0i m e 0 T-i-m:e- - :C-u-r r-e-n:t- |
2026-05-16
18:39:27 | 18889:
boards/esp32p4:
Remove unnecessary `CONFIG_ESPRESS | esp32p4-function-ev-board
:crypto | Killing pytest after timeout... |
2026-05-16
18:36:46 | 18890:
ci/platform:
Fix the “Repository not found” er | lckfb-szpi-esp32s3
:es7210 | Spent Left Speed |
2026-05-16
15:51:09 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | esp32s3-8048S043
:sdmmc | Killing pytest after timeout... |
2026-05-16
15:39:16 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | esp32p4-function-ev-board
:bmp180 | (Same) |
2026-05-16
14:18:03 | 18888:
boards/sim:
skip -no-pie on HOST_ARM64 to fix sim:
| sim
:lua | C u rr e n t
D l o a d U pDllooaadd UTpoltoaald STpoetnatl SLpeefntt S p eLeedft
Sp
e e d0 |
2026-05-16
13:44:28 | 18888:
boards/sim:
skip -no-pie on HOST_ARM64 to fix sim:
| sim
:citest | Traceback (most recent call last):
File "/usr/local/bin/ntfc", line 6, in
sys.exit(main())
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 1485, in __call__
return self.main(*args, **kwargs)
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 1416, in main
ctx.exit()
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 737, in exit
self.close()
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 621, |
2026-05-16
13:35:21 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:lua | T o t a l S p e n t Dload Upload To Left Speed |
2026-05-16
13:18:01 | 18888:
boards/sim:
skip -no-pie on HOST_ARM64 to fix sim:
| sim
:lua | t
L e0f t S p e0e d |
2026-05-16
13:11:42 | 18887:
arch/sim:
rename nuttx libc memchr to avoid host g | sim
:lua | a l % Received % Xferd Average Speed Time Time Time Current |
2026-05-16
12:59:13 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:citest | Makefile:150: *** extraneous 'else'. Stop.
make: *** [tools/Unix.mk:470: arch/sim/src/.context] Error 2
make: Target 'all' not remade because of errors.
Traceback (most recent call last):
File "/usr/local/bin/ntfc", line 6, in
sys.exit(main())
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 1485, in __call__
return self.main(*args, **kwargs)
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 1416, in main
ctx.exit()
File "/usr |
2026-05-16
12:59:02 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:can | Makefile:150: *** extraneous 'else'. Stop.
make: *** [tools/Unix.mk:470: arch/sim/src/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-05-16
12:59:01 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:libcxxtest | (Same) |
2026-05-16
12:58:51 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:btuart | (Same) |
2026-05-16
12:57:42 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:bastest | Makefile:150: *** extraneous 'else'. Stop.
make: *** [tools/Unix.mk:471: arch/sim/src/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-05-16
12:57:31 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:bas | (Same) |
2026-05-16
12:57:20 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:asan | (Same) |
2026-05-16
12:57:09 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:elf | (Same) |
2026-05-16
12:56:08 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:adb | (Same) |
2026-05-16
12:56:07 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:duktape | (Same) |
2026-05-16
12:55:54 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:crypto | (Same) |
2026-05-16
12:55:43 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:configdata | Makefile:150: *** extraneous 'else'. Stop.
make: *** [tools/Unix.mk:470: arch/sim/src/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-05-16
12:38:46 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:citest | Makefile:150: *** extraneous 'else'. Stop.
make: *** [tools/Unix.mk:471: arch/sim/src/.context] Error 2
make: Target 'all' not remade because of errors.
Traceback (most recent call last):
File "/usr/local/bin/ntfc", line 6, in
sys.exit(main())
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 1485, in __call__
return self.main(*args, **kwargs)
File "/usr/local/lib/python3.10/dist-packages/click/core.py", line 1416, in main
ctx.exit()
File "/usr |
2026-05-16
12:38:34 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:can | Makefile:150: *** extraneous 'else'. Stop.
make: *** [tools/Unix.mk:470: arch/sim/src/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-05-16
12:38:23 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:btuart | (Same) |
2026-05-16
12:37:15 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:bastest | Makefile:150: *** extraneous 'else'. Stop.
make: *** [tools/Unix.mk:471: arch/sim/src/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-05-16
12:37:04 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:bas | (Same) |
2026-05-16
12:36:53 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:asan | (Same) |
2026-05-16
12:36:26 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:lvgl_lcd | Makefile:150: *** extraneous 'else'. Stop.
make: *** [tools/Unix.mk:470: arch/sim/src/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-05-16
12:36:09 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:lvgl_fb | Makefile:150: *** extraneous 'else'. Stop.
make: *** [tools/Unix.mk:471: arch/sim/src/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-05-16
12:35:57 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:lua | Makefile:150: *** extraneous 'else'. Stop.
make: *** [tools/Unix.mk:471: arch/sim/src/.context] Error 2
% % TTotal % Received % Xferd Average Speed Time Time Time Current
o % Total % Received % Xferd Average Speed Time Time Time Current
age
S p e0e d T i0m e 0 T i m e 0 T0i m e C0u r r e n t
% Received % Xferd Average Speed Time Time Time Current
make: Target 'all' not remade because of errors. |
2026-05-16
12:35:55 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:adb | Makefile:150: *** extraneous 'else'. Stop.
make: *** [tools/Unix.mk:471: arch/sim/src/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-05-16
12:35:46 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:login | Makefile:150: *** extraneous 'else'. Stop.
make: *** [tools/Unix.mk:470: arch/sim/src/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-05-16
12:35:35 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:loadable | Makefile:150: *** extraneous 'else'. Stop.
make: *** [tools/Unix.mk:471: arch/sim/src/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-05-16
12:34:33 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:libcxxtest | Makefile:150: *** extraneous 'else'. Stop.
make: *** [tools/Unix.mk:470: arch/sim/src/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-05-16
12:32:44 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:elf | Makefile:150: *** extraneous 'else'. Stop.
make: *** [tools/Unix.mk:471: arch/sim/src/.context] Error 2
make: Target 'all' not remade because of errors. |
2026-05-16
12:31:44 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:duktape | (Same) |
2026-05-16
12:31:31 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:crypto | (Same) |
2026-05-16
12:31:20 | 18886:
arch/sim:
replace macOS C++ constructor runtime ha | sim
:configdata | (Same) |
2026-05-16
11:44:45 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | qemu-armv7a
:smp | kasantest.c: In function 'run_testcase':
##[warning]kasantest.c:669:25: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=]
669 | printf("%s spending %ld.%lds
", run->testcase->name,
| ~~^
| |
| long int
| %lld
670 | result.tv_sec,
| ~~~~~~~~~~~~~ |
2026-05-16
11:35:40 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | nucleo-g431rb
:nsh | (Unknown) |
2026-05-16
11:30:50 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | nucleo-g431kb
:nsh | (Same) |
2026-05-16
10:01:36 | 18840:
!sched/clock:
drop CONFIG_SYSTEM_TIME64 / CONFIG_H | sim
:lua | Spe
e d |
2026-05-16
08:45:11 | 3483:
apps:
cmake:
Add APPLE to a build target for sim's | esp32s3-lcd-ev
:lcd | Killing pytest after timeout... |
2026-05-16
08:32:28 | 3483:
apps:
cmake:
Add APPLE to a build target for sim's | esp32p4-function-ev-board
:i2schar | (Same) |
2026-05-16
07:53:55 | 3483:
apps:
cmake:
Add APPLE to a build target for sim's | esp32s3-lcd-ev
:audio | (Same) |
2026-05-16
07:42:47 | 3483:
apps:
cmake:
Add APPLE to a build target for sim's | esp32p4-function-ev-board
:i2schar | (Same) |
2026-05-16
07:10:41 | 3483:
apps:
cmake:
Add APPLE to a build target for sim's | stm32f103-minimum
:adb | C u r r e n t
D l o a d U p l o aDdl o a dT o tUapll o a dS p e nTto t a l L e fStp e nStp e e d
Left
S0p e e d |
2026-05-16
06:48:13 | 3483:
apps:
cmake:
Add APPLE to a build target for sim's | lckfb-szpi-esp32s3
:es7210 | e Speed Tim Dload Upload eT Time Time Current
otal Spent Left Speed |
2026-05-16
05:03:10 | 18885:
boards/arm/stm32:
add support for ALIENTEK M144Z-M | stm32f103-minimum
:adb | u r r e n t
D l o ad U plDolaodad U pTlootaadl STpoetnatl SLepfetn t S p e e dL
eft
0S p e e d |
2026-05-16
04:45:01 | 18885:
boards/arm/stm32:
add support for ALIENTEK M144Z-M | alientek-m144z-m4
:nsh | 21d20
< CONFIG_BOARD_LATE_INITIALIZE=y
29d27
< CONFIG_EXAMPLES_W25BENCH=y
44d41
< CONFIG_NSH_ARCHINIT=y
Saving the new configuration file |
2026-05-16
03:42:24 | 18885:
boards/arm/stm32:
add support for ALIENTEK M144Z-M | sim
:lua | %%% TTToootttaaalll %%% RRReeeccceeeiiivvveeeddd %%% XXXfffeeerrrddd AAAvvveeerrraaagggeee SSSpppeeeeeedd TTiimmee TTiimmee TiTmiem e C u rCruernrte
n t
D l o a d U p l oDaldo a d T oUtpallo a d S p eTnott a l Left Spe e dS
pent
0 Left Spe e d
- - -0: - - :- - 0 00 |
2026-05-15
22:09:09 | 18884:
fs/mnemofs:
Add mnemofs version 1 support. | esp32s3-lcd-ev
:lvgl | Killing pytest after timeout... |
2026-05-15
21:50:24 | 18884:
fs/mnemofs:
Add mnemofs version 1 support. | esp32p4-function-ev-board
:bmp180 | (Same) |
2026-05-15
10:28:05 | 18883:
sim/posix:
Add APPLE to a build target for sim's c | esp32p4-function-ev-board
:tickless | (Same) |
2026-05-15
08:24:12 | 18883:
sim/posix:
Add APPLE to a build target for sim's c | sim
:lua | % X f e r d D lAovaedr a gUep lSopaede d T oTtiamle S pTeinmte L eTfitm e S pCeuerdr
en |